Litheli 2X20V Cordless Snow Blower (Model 002) Instruction Manual

1. Úvod

Thank you for choosing the Litheli 2X20V Cordless Snow Blower, Model 002. This manual provides essential information for the safe assembly, operation, and maintenance of your snow blower. Please read it thoroughly before first use and keep it for future reference.

Figure 1: Litheli 2X20V Cordless Snow Blower, Model 002

2. Bezpečnostní informace

Při práci s elektrickým nářadím vždy dejte přednost bezpečnosti. Dodržujte následující pokyny:

• Používejte ochranné rukavice a brýle.
• Keep hands and clothing away from rotating parts.
• Před zahájením práce se ujistěte, že je pracovní prostor zbaven nečistot a překážek.
• Do not operate the snow blower in areas with poor visibility or insufficient lighting without using the integrated LED lights.
• Nikdy nesměřujte výfukový kanál směrem k lidem, zvířatům ani majetku.
• Always turn off the snow blower and remove the batteries before performing any maintenance, adjustments, or clearing clogs.
• Store the snow blower in a dry place and ensure it is properly maintained to avoid accidents.
• Udržujte děti a domácí zvířata mimo provozní oblast.

3. Obsah balení

Při vybalení ověřte, zda jsou všechny položky přítomny:

1. Snow Blower Unit
2. Střední rukojeť
3. 2x 4.0Ah U20 IPS Super Batteries
4. Vypouštěcí padák
5. Cable Clips (2 pcs)
6. Cotter Pin, Hex Wrench, Screw
7. Chute Rotation Lever
8. Nabíjecí kabel
9. Handle Locking Knob + Bolt (multiple pieces)
10. Návod k obsluze

4. Nastavení a montáž

Follow these steps to assemble your snow blower:

1. Install the Middle Handle: Insert the middle handle into the designated slots on the snow blower's main body. Secure it by inserting and tightening the bolts with the provided knobs.
2. Install the Upper Handle: Attach the upper handle to the middle handle. Insert and tighten the bolts on both sides to secure it.
3. Insert Chute Rotation Lever: Insert the chute rotation lever into the middle hole on the handle assembly. Then, insert the other end into the corresponding hole on the main body and secure it with a cotter pin.
4. Bezpečné zapojení: Use the two provided cable clips to secure any loose wiring along the handle assembly, ensuring it does not interfere with operation or moving parts.
5. Install the Discharge Chute: Place the discharge chute onto the snow blower's main body, aligning it with the opening. Tighten the screw with the hex wrench to secure the chute in place.

5. Návod k obsluze

5.1. Instalace baterie

Ensure batteries are fully charged before use. Open the battery compartment cover and insert both 4.0Ah U20 IPS Super Batteries firmly into their slots until they click into place. Close the cover securely.

Figure 2: The 2-in-1 tool battery, which also functions as a power bank, being inserted into the snow blower.

5.2. Starting the Snow Blower

To start the snow blower, first press the lock-off button located on the handle. Then, simultaneously hold down the operating bail and the upper handle. The LED headlights will illuminate, and the auger will begin to rotate.

Figure 3: Illustration of the two-step activation process (lock-off button and operating bail) for safety.

5.3. Adjusting Snow Discharge

• Discharge Height: Adjust the snow discharge height by moving the handle on the discharge chute up and down.
• Discharge Direction: Change the discharge chute direction by rotating the lever located on the handle assembly. The chute offers 180° adjustability.

Figure 4: The 180-degree rotating chute allows for precise control over snow discharge direction.

5.4. Obecné tipy pro použití

• The snow blower features a 20-inch cleaning width and 12-inch cleaning depth, capable of throwing snow up to 20 feet away.
• Built-in LED lights provide improved visibility for early morning or late-night snow removal.
• The brushless motor delivers greater torque and higher performance for efficient snow clearing.
• This snow blower is ideal for clearing walkways and light to moderate snowfalls (up to 4 inches of light snow or 2-3 inches of heavy snow). For deeper or very wet snow, proceed slowly to avoid overloading the unit.

6. Údržba

Pravidelná údržba zajišťuje optimální výkon a dlouhou životnost vaší sněhové frézy:

• Čištění: After each use, clear any snow, ice, or debris from the auger, chute, and exterior of the snow blower. Ensure all moving parts are free from obstructions.
• Péče o baterie:
  • Always charge batteries in a warm, dry environment.
  • Avoid charging or storing batteries in extremely cold temperatures, as this can affect their performance and lifespan.
  • Store batteries fully charged in a cool, dry place when not in use for extended periods.
• Skladování: The snow blower features a collapsible handlebar for space-saving storage. Loosen the handle locking knobs to fold the handle down. Store the unit in a dry, protected area away from direct sunlight and moisture.

Figure 5: The snow blower with its collapsible handlebar, demonstrating its space-saving storage capability.

7. Řešení problémů

Refer to this section for solutions to common issues:

8. Specifikace

Figure 6: Visual representation of the snow blower's 12-inch clearing depth and 20-inch clearing width.

Figure 7: Illustration showing the snow blower's capability to throw snow up to 20 feet.

9. Záruka a podpora

Litheli nabízí komplexní záruku na váš produkt:

• Snow Blower Warranty: 3letá záruka.
• Záruka na baterie: 1letá záruka.

For any questions, concerns, or warranty claims, please contact Litheli customer service. They aim to respond within 24 hours.

Navštivte úředníka Obchod LiTHELi pro více informací a podporu produktu.