ANENG PN200

Digitální číselník ANENG PN200amp Návod k obsluze multimetru

Model: PN200

1. Konec produktuview

The ANENG PN200 is a versatile digital clamp meter multimeter designed for accurate measurement and troubleshooting of electrical systems. It combines the functions of a clamp meter and a multimeter, offering a wide range of measurement capabilities for both AC and DC circuits.

Digitální číselník ANENG PN200amp Meter showing multiple functions

Image: ANENG PN200 Digital Clamp Meter highlighting its multiple functions including AC/DC Voltage, AC/DC Current, Max Count, Backlit Screen, Hertz, Resistance, Capacitance, Diode/Buzzer, Data Retention, Automatic Shutdown, NCV, and Relative Measurement.

2. Obsah balení

Your ANENG PN200 package includes the following items:

  • 1x ANENG PN200 Digital Clamp Metr
  • 2x AAA baterie
  • 1x Combination Test Lead Set (includes 4 connection sockets, 2 PVC cables, 2 copper needles, 2 U-shaped inserts, 2 meter pens, 2 alligator clips, 2 puncture needles)
  • 1x Multimeter Test Lead Set
  • 1x nabíjecí kabel
  • 1x Návod k použití
  • Zásobník 1x

3. Nastavení

3.1 Instalace baterie

  1. Vyhledejte kryt přihrádky na baterie na zadní straně zařízení.
  2. Posuňte kryt a otevřete přihrádku.
  3. Vložte dvě baterie typu AAA a dbejte na správnou polaritu (+/-).
  4. Zasuňte kryt přihrádky na baterie zpět na místo, dokud bezpečně nezacvakne.

3.2 Připojení měřicích kabelů

  1. Za svtage, resistance, capacitance, diode, and continuity measurements, insert the black test lead into the 'COM' (common) jack.
  2. Zasuňte červený měřicí vodič do zdířky „VΩHz“.
  3. Ensure connections are firm before use.

4. Návod k obsluze

The ANENG PN200 features a rotary dial for selecting measurement functions and dedicated buttons for additional features.

4.1 Volba funkce

Otáčením otočného voliče vyberte požadovanou funkci měření:

  • V ~: AC svtage měření
  • PROTI-: DC svtage měření
  • A~: AC Current measurement (using clamp)
  • NA-: DC Current measurement (using clamp)
  • Ω: Měření odporu
  • Hz: Měření frekvence
  • Kapacita: Měření kapacity
  • Dioda/Kontinuita: Diode test and Continuity check
  • NCV: Bezkontaktní svtage detekce

4.2 klíčové funkce

  • H/HOLD: Short press to hold the current reading on the display. Long press to activate/deactivate the backlight.
  • REL: Used for relative measurement, setting the current reading as a reference point. For capacitance, press to zero out the meter before clampIng.
  • SOUBOR: Used to switch between different sub-functions within a main dial setting (e.g., AC/DC for current, Diode/Continuity).

4.3 Specifická měření

Below are common measurement procedures:

AC/DC Voltage Měření

  1. Turn the dial to 'V~' for AC voltage nebo 'V-' pro stejnosměrný proudtage.
  2. Connect the test leads to the circuit points you wish to measure.
  3. Přečtěte si svtage hodnota na displeji.

Měření AC/DC proudu (Clamp)

  1. Turn the dial to 'A~' for AC current or 'A-' for DC current.
  2. Otevřete třamp jaws and enclose a single conductor (not a bundle of wires).
  3. Odečtěte aktuální hodnotu na displeji.
  4. Poznámka: For accurate DC current measurements, ensure to press the 'REL' button to zero out the meter before clampIng.
Digitální číselník ANENG PN200amp Meter measuring high precision AC/DC current

Image: ANENG PN200 Digital Clamp Meter demonstrating high precision 600A AC/DC current measurement capability.

Resistance, Capacitance, Diode, Continuity, Frequency

  1. Turn the dial to the respective function symbol (Ω, Capacitance, Diode/Continuity, Hz).
  2. Connect the test leads to the component or circuit.
  3. For Diode/Continuity, use the 'SET' button to toggle between modes. A beep indicates continuity.
  4. For Capacitance, ensure the capacitor is discharged before measurement.
Digitální číselník ANENG PN200amp Meter showing various measurement functions

Image: ANENG PN200 Digital Clamp Meter displaying its comprehensive measurement capabilities including DC Voltage, AC svtage, Capacitance, Diode, Capacitive Discharge, and Resistance.

Bezkontaktní svtage (NCV) Detekce

  1. Turn the dial to 'NCV'.
  2. Bring the top part of the clamp meter near an AC voltage zdroj.
  3. The meter will beep and an indicator light will illuminate if AC voltage je detekováno.
Digitální číselník ANENG PN200amp Měřič provádějící detekci NCV

Image: ANENG PN200 Digital Clamp Meter detecting non-contact induced electricity from a wall outlet.

4.4 Oficiální videoukázka produktu

Video: An official product video from ANENG Stores demonstrating various features and operations of the PN200 Digital Clamp Metr.

5. Údržba

5.1 Čištění

Zařízení otřete suchým, měkkým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.

5.2 Výměna baterie

If the low battery indicator appears on the display, replace the AAA batteries as described in the Setup section.

5.3 Skladování

Uložte clamp meter and its accessories in the provided storage bag in a cool, dry place away from direct sunlight and extreme temperatures.

6. Řešení problémů

  • Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.