Camry EB4030H

Camry EB4030H Electronic Personal Body Composition Scale User Manual

Model: EB4030H

Zavedení

Thank you for choosing the Camry EB4030H Electronic Personal Body Composition Scale. This manual provides essential information for the safe and effective use of your new scale. Please read these instructions thoroughly before use and retain them for future reference.

Důležité bezpečnostní informace

  • Váhu vždy umístěte na tvrdý, rovný povrch. Použití na měkkých površích, jako je koberec, může ovlivnit přesnost.
  • Nepoužívejte váhu na mokrých nebo kluzkých podlahách, abyste předešli nehodám.
  • Neskákejte na váhu. Nastupujte a vystupujte opatrně.
  • Chraňte váhu před vodou a extrémními teplotami.
  • This scale is for household use only and not intended for medical diagnosis or treatment.
  • Pokud váha nefunguje správně, nepokoušejte se ji sami opravovat. Kontaktujte zákaznickou podporu.
  • Udržujte baterie mimo dosah dětí.

Obsah balení

Zkontrolujte prosím balení, zda neobsahuje následující položky:

  • Camry EB4030H Electronic Personal Body Composition Scale
  • Uživatelská příručka

Konec produktuview

The Camry EB4030H scale features a clear digital display and intuitive controls for both weight and body composition analysis. The display area indicates various body composition categories such as 'FAT', 'NORMAL', 'LEAN', and 'TOO FAT', along with 'SET' and 'GUEST' functions for user management.

Detailní záběr view of the Camry EB4030H scale's display and control area.
Obrázek 1: Close-up of the scale's display showing indicators for 'SET', 'GUEST', 'FAT', 'NORMAL', 'LEAN', and 'TOO FAT' around the central digital screen.

Nastavení

1. Instalace baterie

  1. Najděte přihrádku na baterie na spodní straně váhy.
  2. Otevřete kryt bateriového prostoru.
  3. Insert the required batteries (typically AAA, not included) ensuring correct polarity (+/-).
  4. Bezpečně zavřete kryt bateriového prostoru.

2. Počáteční umístění

Place the scale on a hard, flat, and stable surface. Avoid carpets, rugs, or uneven flooring, as these can lead to inaccurate readings.

Návod k obsluze

1. Zapnutí/vypnutí

The scale typically powers on automatically when you step on it. It will power off automatically after a few seconds of inactivity.

2. Výběr jednotky

If your scale supports multiple units (e.g., kg, lb), there is usually a button on the underside or near the battery compartment to switch between them. Press this button to select your preferred unit before weighing.

3. Setting User Profiles (pro analýzu složení těla)

To utilize the body composition features, you may need to set up a user profile. Look for a 'SET' button or similar control. Follow the on-screen prompts to enter personal data such as age, height, and gender. The 'GUEST' function allows for a single measurement without saving data.

4. Změření hmotnosti

  1. Ujistěte se, že váha je na rovném, tvrdém povrchu.
  2. Gently step onto the scale with bare feet, standing still and centered.
  3. Your weight will be displayed on the screen. Wait for the reading to stabilize.
  4. Step off the scale. The reading will hold for a few seconds before the scale powers off.

5. Měření složení těla

Po nastavení vašeho uživatelského profile and selecting it (or using 'GUEST' mode), step onto the scale with bare feet. The scale will measure your weight and then proceed to analyze body composition. The display will indicate categories such as 'FAT', 'NORMAL', 'LEAN', or 'TOO FAT' based on its internal algorithms. Refer to the scale's display for specific indicators.

Údržba a péče

  • Čištění: Otřete povrch váhy měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani váhu neponořujte do vody.
  • Skladování: Váhu skladujte na chladném a suchém místě. Pokud ji nepoužíváte, nepokládejte na ni těžké předměty.
  • Výměna baterie: When the display shows a 'Lo' or low battery indicator, replace all batteries with new ones of the same type.

Odstraňování problémů

ProblémMožná příčinaŘešení
No display / Scale won't turn onDead batteries; Incorrect battery installationVyměňte baterie; Zkontrolujte polaritu baterií
Nepřesné údajeScale on uneven surface; Scale moved recently; OverloadPlace on hard, flat surface; Recalibrate by stepping on/off; Do not exceed max capacity
'Lo' or 'Err' on displayLow battery; Measurement error; OverloadReplace batteries; Step off and re-measure; Do not exceed max capacity
Body composition not measuredNot using bare feet; User profile not set up; Electrodes not cleanEnsure bare feet contact electrodes; Set up user profile; Clean electrodes with a damp tkanina

Specifikace

FunkceDetail
ZnačkaCamry
ModelEB4030H
Maximální nosnost150 kg
Hmotnost položky200 gramů
Form FactorMini
MateriálVícemateriálová konstrukce
BarvaVícebarevné

Záruka a podpora

This product is manufactured by Camry. For warranty information or technical support, please refer to the warranty card included with your purchase or contact the retailer where the product was acquired. Keep your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.