HUNSN RJ03

Uživatelská příručka k mikrofirewallu HUNSN RJ03

Model: RJ03

Zavedení

This manual provides detailed instructions for the setup, operation, and maintenance of your HUNSN RJ03 Micro Firewall Appliance. The RJ03 is a compact, fanless mini PC designed for network security applications, including use as a firewall, VPN router, or other network appliance. It features an Intel Celeron N5105 processor and multiple 2.5GbE LAN ports.

Před použitím zařízení si prosím pečlivě přečtěte tento návod k obsluze, abyste zajistili správnou instalaci a optimální výkon.

Bezpečnostní informace

  • Ensure the device is placed on a stable, flat surface with adequate ventilation.
  • Use only the provided power supply. Using an incorrect power supply may damage the device and void the warranty.
  • Nevystavujte zařízení vodě, vlhkosti ani extrémním teplotám.
  • Avoid opening the chassis unless performing authorized upgrades (RAM, SSD/HDD, WiFi module). Disconnecting internal components improperly can cause damage.
  • In case of malfunction, disconnect the power supply and contact support. Do not attempt repairs yourself.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

  • Firewall HUNSN RJ03
  • Napájecí zdroj (DC12V3A)
  • Napájecí kabel
  • Záruční list

Konec produktuview

The HUNSN RJ03 is a compact, fanless mini PC designed for robust network applications. Its aluminum chassis acts as a heatsink, ensuring silent operation.

Přední panel

Přední view of HUNSN RJ03 Micro Firewall Appliance

Obrázek 1: Rozložení předního panelu

The front panel provides essential user interfaces:

  • Tlačítko zapnutí/vypnutí napájení: Používá se k zapnutí nebo vypnutí zařízení.
  • Tlačítko CLR CMOS: A small button to clear CMOS settings, often requiring a pin to press.
  • Porty USB 3.0 (2x): Pro připojení vysokorychlostních USB zařízení.
  • Port typu C: Supports display output and USB connectivity.
  • Slot na kartu TF: For TransFlash (MicroSD) memory cards.
  • Antenna Connectors (2x): For optional WiFi antennas.

Zadní panel

Zadní view of HUNSN RJ03 Micro Firewall Appliance with ports labeled

Obrázek 2: Rozložení zadního panelu

Zadní panel obsahuje hlavní možnosti připojení:

  • Porty USB 2.0 (2x): Pro připojení standardních USB zařízení.
  • Port HDMI: For connecting to a display.
  • DisplayPort (DP): For connecting to a display.
  • LAN Ports (4x 2.5GbE I226-V): Four 2.5 Gigabit Ethernet ports for network connections (ETH0, ETH1, ETH2, ETH3).
  • DC_IN Port: For connecting the 12V power adapter.

Pokyny pro nastavení

1. Hardware Installation (Optional)

If you purchased a barebones unit or wish to upgrade, follow these steps to install RAM, SSD/HDD, or a WiFi module. Ensure the device is powered off and disconnected from the power source before proceeding.

  1. Otevřete podvozek: Carefully remove the screws securing the bottom panel of the appliance.
  2. Instalace RAM: The device supports 2 x SODIMM DDR4 2933MHz, up to 32GB. Insert the RAM modules into the SODIMM slots, ensuring they are seated correctly and the clips lock them in place.
  3. Instalace úložiště:
    • M.2 NVMe SSD: Insert the M.2 2280 PCIe 3.0 x1 NVMe SSD into its dedicated slot and secure it with the provided screw.
    • 2.5 Inch SATA SSD/HDD: Connect a 2.5-inch SATA SSD or HDD using the internal SATA data and power cables (if included). Secure the drive within the chassis.
  4. Install M.2 WiFi Module (Optional): If installing a WiFi 6 module, insert it into the M.2 WiFi slot and connect the antenna cables.
  5. Zavřete podvozek: Replace the bottom panel and secure it with the screws.

2. Připojení periferií

  1. Připojení napájení: Connect the provided power adapter to the DC_IN port on the rear panel, then plug the power cord into an electrical outlet.
  2. Internetové připojení: Connect your network cables to the 2.5GbE LAN ports (ETH0-ETH3) as required for your network configuration (e.g., WAN, LAN, DMZ).
  3. Display and Input (Optional): For initial setup or direct interaction, connect a monitor via HDMI or DisplayPort, and a keyboard/mouse to the USB ports.

3. Počáteční spuštění

Press the Power ON/OFF button on the front panel. The device should power on. If a display is connected, you will see the boot sequence.

Instalace operačního systému

The HUNSN RJ03 supports a variety of operating systems and network appliance software. It supports UEFI boot only.

  • Kompatibilní systémy: 5.10.x and above core-based FreeBSD router systems, Linux distributions, or Windows operating systems.
  • Firewall Software: Compatible with popular open-source solutions such as pfSense and OPNsense.
  • Proces instalace:
    1. Prepare a bootable USB drive with your chosen operating system or firewall software.
    2. Connect the USB drive to a USB port on the RJ03.
    3. Power on the device and enter the BIOS/UEFI setup (usually by pressing DEL or F2 during boot) to configure the boot order, prioritizing the USB drive.
    4. Při instalaci operačního systému postupujte podle pokynů na obrazovce.
  • Network Driver Considerations: The Intel I226-V 2.5GbE LAN ports may require specific drivers or a newer kernel version for optimal performance, especially with certain older operating systems or firewall distributions (e.g., older pfSense versions). Ensure your chosen OS version supports these NICs or be prepared to install necessary drivers.

Operace

Once the operating system is installed and configured, the HUNSN RJ03 functions as a reliable network appliance. Specific operation details will depend on the software installed (e.g., OPNsense, pfSense).

  • Řízení spotřeby: The device supports hardware auto power-on (enabled by default), network wake-up (Wake-on-LAN), and system power management features. These can typically be configured in the BIOS/UEFI settings.
  • Design bez ventilátoru: The fanless design ensures silent operation (0.00dB noise). The aluminum chassis acts as a large heatsink, dissipating heat efficiently.
  • Řízení teploty: The device is designed to operate within a temperature range of 0°C to 70°C. While the chassis may feel warm to the touch, this is normal for fanless systems and indicates effective heat dissipation.

Údržba

  • Čištění: Periodically clean the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation fins are free from dust accumulation to maintain optimal cooling.
  • Chlazení: Although fanless, ensure the device has adequate airflow around its chassis. Avoid placing it in enclosed spaces without ventilation. If operating in consistently high ambient temperatures or under heavy load, consider adding an external USB fan for additional cooling, especially if system temperatures are a concern.
  • Aktualizace firmwaru: Check the HUNSN support website or contact customer service for any available BIOS/UEFI firmware updates, which may improve compatibility or performance.

Odstraňování problémů

ProblémMožná příčinaŘešení
Zařízení se nezapne.No power, faulty power supply, or internal connection issue.
  • Verify power cord and adapter are securely connected.
  • Test the power outlet.
  • Ujistěte se, že je tlačítko napájení zcela stisknuté.
Žádný výstup na displej.Incorrect display connection, monitor input, or BIOS settings.
  • Check HDMI/DisplayPort cable connections.
  • Ensure monitor is set to the correct input source.
  • Try connecting to a different display port (HDMI or DP).
  • Clear CMOS using the CLR CMOS button (refer to Product Overview).
Network interfaces (LAN ports) not working or slow.Missing or incorrect network drivers, incompatible OS kernel.
  • Ensure your operating system or firewall software has the correct drivers for Intel I226-V NICs.
  • Consider updating the OS kernel or using a newer version of your chosen software (e.g., pfSense 2.7 or OPNsense).
  • Ověřte integritu síťového kabelu.
Device runs very warm.Normal operation for fanless design, or insufficient ventilation.
  • Zajistěte dostatečné proudění vzduchu kolem zařízení.
  • Avoid placing it in direct sunlight or confined spaces.
  • If consistently under heavy load, consider an external cooling fan.

Specifikace

Číslo modeluHUNSN RJ03
PodvozekAluminum, Fanless Design
ProcesorIntel Celeron N5105 (4M Cache, up to 2.90 GHz)
Podpora AES-NIAno
Paměť2 x SODIMM DDR4 2933MHz, max. 32GB (4GB installed in base model)
Skladování1 x M.2 2280 PCIe 3.0 x1 NVMe SSD, 1 x 2.5 Inch SATA SSD/HDD (128GB SSD installed in base model)
Síťová karta4 x 2.5GbE Intel I226-V LAN
I/O rozhraníPower ON/OFF, CLR CMOS, 2 x USB 3.0, Type-C (Display/USB), TF Card Slot, 2 x USB 2.0, HDMI, DisplayPort, 4 x LAN, DC_IN
Rozšíření1 x M.2 WiFi 6 slot
MocDC100-240V AC/50-60Hz input, 12V3A output
Provozní teplota0 °C ~ 70 °C
Skladovací teplota-20 °C ~ 80 °C
Relativní vlhkost10% ~ 90% nekondenzující
TDP10W
Chladicí systémFanless, supports optional 12V 4-pin 8010 fan
RozměryRozměr 145.6 x 135.6 x 53.6 mm
Hmotnost1.5 kg (cca 3.3 lb)
Kompatibilita systémuRouterové systémy FreeBSD (5.10.x+), distribuce Linuxu, operační systém Windows (pouze podpora UEFI)
Speciální funkceAutomatické zapnutí hardwaru (výchozí), probuzení ze sítě, správa napájení systému, správa teploty

Záruka a podpora

Your HUNSN RJ03 appliance comes with a warranty. Please refer to the included warranty card for specific terms and conditions. For technical support, troubleshooting assistance, or inquiries regarding parts and upgrades, please contact HUNSN customer service through the retailer where you purchased the product or visit the official HUNSN store online.

Další zdroje a informace o produktech naleznete na HUNSN Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.