APLOS AP20 Scuba Dive Light Instruction Manual

1. Úvod

Thank you for choosing the APLOS AP20 Scuba Dive Light. This manual provides essential information for the safe and effective operation, maintenance, and care of your dive light. Please read it thoroughly before use and retain it for future reference.

Image 1.1: The APLOS AP20 Scuba Dive Light, a compact and powerful underwater flashlight.

2. Vlastnosti produktu

• Vysoký jas: Delivers a maximum of 2000 lumens, providing illumination up to 200 meters (656 feet) underwater.
• Jednoduchá obsluha: Features a user-friendly one-touch magnetic switch for easy control.
• Vodotěsnost IPX8: Designed for underwater use up to 100 meters (328 feet) with enhanced sealed O-rings for superior water resistance.
• Odolná konstrukce: Crafted from aircraft-grade aluminum alloy with a tempered glass lens, offering resistance to oxidation, abrasion, and saltwater corrosion.
• Všestranné aplikace: Suitable for diving, fishing, camping, mountain climbing, tactical defense, and night fishing.

Image 2.1: Illustration highlighting the IPX8 waterproof capability up to 100m (328ft) and a beam distance of 210m (689ft).

Image 2.2: Close-up of the APLOS AP20 showing its compact body and the 1 XM L2-2000 lumens LED bulb with over 50,000 hours lifespan.

3. Obsah balení

Upon opening your APLOS AP20 Scuba Dive Light package, please verify that all the following items are included:

• 1 x APLOS AP20 Dive Flashlight
• 1 x dobíjecí baterie (předinstalovaná nebo samostatná)
• 1x USB nabíječka
• 1 x USB kabel
• 1 x řemínek na zápěstí
• 4 x Voděodolné O-kroužky (náhradní)
• 1 x Uživatelská příručka (tento dokument)

Image 3.1: All items included in the APLOS AP20 Scuba Dive Light package, laid out next to the product box.

4. Struktura a komponenty produktu

Familiarize yourself with the different parts of your APLOS AP20 dive light:

Obrázek 4.1: Rozložený view diagram of the APLOS AP20 showing its main components: AL-6061-T6 aircraft-grade aluminum body, high transparent tempered glass lens, one-touch switch, and waterproof O-rings.

• Hlava: Contains the LED emitter and tempered glass lens.
• Tělo: Houses the battery and internal circuitry. Made from AL-6061-T6 aircraft-grade aluminum with military regulations III hard anodized finish for abrasion and seawater corrosion resistance.
• One-Touch Magnetic Switch: Located on the body for easy mode selection and power control.
• Ocasní víčko: Secures the battery and provides a point for the wrist strap.
• Waterproof O-rings: Two O-rings ensure a watertight seal for underwater operation.

5. Nastavení a nabíjení

5.1 Instalace baterie

1. Unscrew the tail cap of the dive light by turning it counter-clockwise.
2. Insert the rechargeable battery with the positive (+) terminal facing towards the head of the flashlight.
3. Carefully screw the tail cap back on clockwise until it is fully tightened. Ensure the O-rings are properly seated to maintain the waterproof seal.

5.2 Nabíjení baterie

1. Remove the battery from the dive light.
2. Place the battery into the provided USB charger, ensuring correct polarity.
3. Connect the USB charger to a power source using the supplied USB cable.
4. Kontrolka na nabíječce bude ukazovat stav nabíjení (např. červená pro nabíjení, zelená pro plné nabití).
5. Po plném nabití odpojte nabíječku a vyjměte baterii.

6. Provoz

6.1 Základní použití

1. Zapnutí/vypnutí: Rotate the magnetic switch to turn the light on or off.
2. Výběr režimu: Continue rotating the magnetic switch to cycle through different brightness modes (if applicable). The APLOS AP20 features a simple one-touch magnetic switch for ease of use.

6.2 Použití pod vodou

Before each dive, ensure the tail cap is securely tightened and the O-rings are clean and properly lubricated to maintain the IPX8 waterproof rating. The light is designed to operate reliably up to 100 meters (328 feet) underwater.

7. Údržba

• Po každém ponoru: Rinse the dive light thoroughly with fresh water to remove salt, sand, and other debris.
• Péče o O-kroužek: Periodically inspect the O-rings for any signs of damage, cracks, or wear. Clean them and apply a thin layer of silicone grease to maintain their elasticity and waterproof seal. Replace damaged O-rings immediately using the provided spares.
• Péče o baterie: Store the battery in a cool, dry place when not in use. If storing for extended periods, charge the battery to approximately 50% capacity every few months to prolong its lifespan.
• Čištění: Wipe the body of the flashlight with a soft, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Skladování: Store the dive light in a dry, cool place away from direct sunlight and extreme temperatures.

8. Řešení problémů

9. Specifikace

10. Záruka a podpora

APLOS provides a worry-free 24-month warranty for the AP20 Scuba Dive Light. For any questions, concerns, or warranty claims, please contact APLOS customer service.

Kontaktní údaje:

• E-mail: sales@aploslight.com
• Webmísto: www.aploslight.com
• Telefon: 0086–15361877162
• Adresa: 89 Hao 3 Zhuang 3433 Shi, Shuang Gao Lu, Gao Chun Jing Ji Kai Fa Qu, Nan Jing Shi, Čína 2113166

Image 10.1: Back of the product packaging showing manufacturer contact details and compliance certifications (FC, CE, RoHS, UKCA).