Návod k použití podlahového stojanu TV SCHWAIGER TVS7040 511

Důležité bezpečnostní informace

Please read this instruction manual carefully before assembly and use. Keep this manual for future reference. Incorrect assembly or use may result in damage to the product, TV, or personal injury.

Před montáží se ujistěte, že jsou všechny součásti přítomny a nepoškozené.
Nepřekračujte maximální nosnost 40 kg (88 lb).
Ensure the TV size is within the recommended range of 37-70 inches and VESA compatibility (max 600x400).
Sestavujte na měkkém, čistém povrchu, abyste zabránili poškrábání.
Pro zvedání a montáž televizoru vždy používejte dvě osoby.
Umístěte stojan na stabilní, rovný povrch.
Během montáže držte děti a domácí zvířata mimo dosah.

Obsah balení

Verify that all parts listed below are included in your package. If any parts are missing or damaged, please contact SCHWAIGER customer support.

Základna z tvrzeného skla
Sloupec podpory
Montážní držák pro TV (kompatibilní s VESA)
Sada montážního hardwaru (šrouby, podložky, distanční podložky pro různé modely televizorů)
Klipy pro správu kabelů
Assembly Tools (e.g., Allen key, wrench)
Návod k použití

Pokyny k instalaci a montáži

Follow these steps carefully for proper assembly. It is recommended to have a second person assist with TV mounting.

Krok 1: Sestavte základnu a sloup

Attach the support column to the tempered glass base using the provided screws and tools. Ensure the column is securely fastened and upright.

Přední view of the SCHWAIGER TV floor stand without a TV, showing the VESA mounting bracket attached to the central column and the tempered glass base.

Obrázek: Přední strana view of the stand's column and base assembly.

Step 2: Attach TV Mounting Brackets to TV

Carefully place your TV face down on a soft, clean surface. Identify the VESA mounting holes on the back of your TV. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern. Attach the two vertical mounting brackets to the back of your TV. Ensure they are level and securely tightened.

Close-up of the TV mounting bracket showing a screw securing it to the VESA plate, with adjustment slots visible.

Image: Detail of TV bracket attachment.

Krok 3: Namontujte televizor na stojan

With assistance, carefully lift the TV and hook the attached vertical brackets onto the horizontal bar of the stand's mounting plate. Ensure the TV is securely seated. Use the safety screws or locking mechanisms to prevent accidental dislodgement.

Přední view of the SCHWAIGER TV floor stand with a large flat-screen TV mounted, showing the black tempered glass base and the central support column.

Image: Fully assembled stand with TV.

Krok 4: Správa kabelů

Utilize the integrated cable guide and clips on the support column to neatly route your TV and device cables. This helps maintain a clean appearance and prevents tripping hazards.

Close-up of the central support column of the TV stand, showing a yellow cable neatly routed and secured with cable management clips along the back.

Image: Cable management feature.

Návod k obsluze

Swivelling Function

The SCHWAIGER TVS7040 511 TV Floor Stand features a swivelling mechanism. To adjust the viewing angle, gently grasp the sides of your TV and rotate it to the desired position. Avoid excessive force. The swivel range allows for optimal viewing from various points in a room.

Close-up of the top swivel mechanism of the TV stand, showing the pivot point and robust construction.

Image: Detail of the swivel mechanism.

Údržba

Čištění: Use a soft, dry cloth to clean the stand. For stubborn marks on the glass base, a mild glass cleaner can be used. Avoid abrasive cleaners or solvents.
Inspekce: Pravidelně kontrolujte všechny šrouby a spoje, zda jsou pevně utažené a bezpečné. V případě potřeby je dotáhněte.
Správa kabelů: Ensure cables are still neatly routed and not pinched or strained.

Odstraňování problémů

Problém	Možná příčina	Řešení
Televizor není vodorovně	Mounting brackets not aligned; stand on uneven surface.	Adjust TV brackets; ensure stand is on a flat, stable surface.
Stoj se cítí nestabilní	Screws are loose; stand overloaded.	Check and tighten all assembly screws; ensure TV weight is within limits.
Difficulty swivelling TV	Mechanism stiff; obstruction.	Ensure no cables are caught; apply gentle, even pressure. Do not force.

Specifikace

Značka	SCHWAIGER
Číslo modelu	TVS7040 511 (Item Model Number: 4004005034257)
Kompatibilní velikosti TV	37–70 palce (94–178 cm)
Maximální nosnost	40 kg (88 lb)
Kompatibilita VESA	Max. 600 x 400 mm
Typ pohybu	Otočný
Materiál	Tempered Glass (Base), Steel (Column, Bracket)
Rozměry produktu	5.25 x 0.31 x 1.66 inches (Note: These dimensions appear to be for packaging or a component, not the full assembled stand. Refer to assembly instructions for overall footprint.)
Hmotnost položky	19.14 libry
Barva	Černý

Záruka a podpora

This product comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official SCHWAIGER website. For technical support, missing parts, or any questions regarding the product, please contact SCHWAIGER customer service.

Výrobce: SCHWAIGER

Datum první dostupnosti: 9. prosince 2022

SCHWAIGER TVS7040 511