AODELAN TR90 Wired Remote Controller for Camera

Zavedení

The AODELAN TR90 is a wired remote controller with a digital timer designed for camera shutter activation. It provides precise control over delay, exposure time, interval, and the number of shots for various photography techniques, including time-lapse and long exposure. This device features a two-stage shutter button, a backlit LCD display, status LED, and an audible beep for operational feedback.

Konec produktuview

Obrázek 1: Labeled diagram of the AODELAN TR90 remote controller, showing its components including the release lamp, display panel, illuminator/lock button, TIMER START/STOP button, ON/OFF button, SET button, selector button, shutter-release button, and battery-chamber cover. The back of the unit shows the model number TR90 and battery requirements.

• Release Lamp: Označuje provozní stav.
• Panel displeje: LCD screen for settings and status.
• Illuminator/Lock Button: Activates backlight or locks controls.
• Tlačítko START/STOP ČASOVAČE: Initiates or halts timer functions.
• Tlačítko ON/OFF: Zapne nebo vypne zařízení.
• Tlačítko SET: Potvrzuje výběr.
• Selector Button: Prochází možnostmi nabídky a upravuje hodnoty.
• Tlačítko spouště: Dvou-stage button for autofocus (half-press) and photo capture (full-press).
• Battery-Chamber Cover: Chrání přihrádku na baterii.

Nastavení

1. Instalace baterie

1. Locate the battery-chamber cover on the back of the remote controller (refer to Figure 1).
2. Posunutím otevřete kryt.
3. Insert two AAA 1.5V LR03 alkaline batteries, ensuring correct polarity (+/-). Poznámka: Baterie nejsou součástí dodávky.
4. Bezpečně zavřete kryt prostoru pro baterie.

2. Připojení k fotoaparátu

1. Ensure both the camera and the remote controller are powered off.
2. Connect the remote controller's cable to the remote control terminal on your camera. The connection port type may vary by camera model.
3. Power on the camera and then the remote controller.

Návod k obsluze

Basic Shutter Operation

• Automatické zaostření: Half-press the shutter-release button to activate your camera's autofocus.
• Pořídit fotografii: Fully press the shutter-release button to take a picture.

Funkce časovače

The TR90 offers four primary timer functions: Delay, Long Exposure, Interval, and Number of Shots. These can be set from 0 seconds up to 99 hours, 59 minutes, and 59 seconds in one-second increments, except for the number of shots.

Obrázek 2: Zobrazit napřamples for setting Delay, Long Exposure (LONG), Interval (INTVL), and Number of Shots (NUMBER) on the AODELAN TR90. This image also illustrates the concept of time-lapse photography.

Obrázek 3: Detailní view of the AODELAN TR90 display, showing the ranges for Delay, Long Exposure (LONG), Interval (INTVL), and Number of Shots (N). It also highlights the Lock indicator, Low battery indicator, and Speaker on/off indicator.

1. Parametry nastavení:
   • Stiskněte tlačítko SOUBOR button to cycle through the parameters: DELAY, LONG (exposure time), INTVL (interval), and N (number of shots).
   • Použijte tlačítka pro výběr (up/down/left/right) to adjust the values for each parameter.
   • Stiskněte SOUBOR znovu pro potvrzení hodnoty a přechod k dalšímu parametru.
2. ZPOŽDĚNÍ: Time before the first shot is taken. (Range: 0s to 99h 59m 59s)
3. DLOUHÁ (doba expozice): Duration the shutter remains open. (Range: 0s to 99h 59m 59s)
4. INTVL (Interval): Time between consecutive shots. (Range: 0s to 99h 59m 59s)
5. N (počet snímků): Total number of photos to be taken. (Range: 1 to 399, or '--' for unlimited. To set unlimited, select '1' and press the down selector button.)
6. Starting/Stopping Timer: Stiskněte tlačítko ČASOVAČ START/STOP button to begin or end the programmed sequence.

Pokročilé funkce

• BULB Mode: For exposures longer than the camera's maximum shutter speed. Set the LONG parameter to the desired duration.
• Vysokorychlostní kontinuální snímání: Allows for rapid consecutive shots.

Obrázek 4: The AODELAN TR90 remote controller being used for creative photography scenarios, highlighting its BULB mode and High-Speed Continuous Shooting capabilities.

Anti-Shake Function

Using the remote controller helps prevent camera shake that can occur when manually pressing the camera's shutter button, especially crucial for long exposures or telephoto shots.

Obrázek 5: Illustration of the anti-shake benefit of using the AODELAN TR90 remote controller, showing a camera on a tripod and the remote being used to trigger the shutter without direct contact with the camera body.

Údržba

• Keep the remote controller dry. Do not expose it to moisture or rain.
• Zařízení čistěte měkkým, suchým hadříkem. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky.
• Pokud se nepoužívá, skladujte na chladném a suchém místě.
• Pokud zařízení nebudete delší dobu používat, vyjměte baterie, abyste zabránili jejich vytečení.

Odstraňování problémů

• Zařízení se nezapíná: Zkontrolujte instalaci baterií a ujistěte se, že jsou nové.
• Dálkové ovládání nespouští kameru: Ensure the cable is securely connected to both the remote and the camera. Verify camera settings allow for remote shutter release.
• Incompatibility with Olympus/OM System Cameras: Please note that despite some listings, the AODELAN TR90 may not be compatible with all Olympus or OM System camera models. Verify compatibility with your specific camera model before use.
• Problémy se zobrazením: Pokud je displej tlumený nebo bliká, vyměňte baterie.

Specifikace

Obrázek 6: Physical dimensions and cord length of the AODELAN TR90 remote controller.

Záruka a podpora

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official AODELAN webUschovejte si doklad o koupi pro případné reklamace.