Uživatelská příručka k laserovému gravírovacímu stroji SCULPFUN S10

1. Úvod

This manual provides essential information for the safe and effective operation of your SCULPFUN S10 Laser Engraver. The SCULPFUN S10 is a versatile laser engraving and cutting machine designed for precision work on a variety of materials, including wood, metal, and acrylic. It features a powerful 10W diode laser and an integrated air assist system for enhanced performance.

2. Bezpečnostní informace

WARNING: Laser Class IV. Avoid direct exposure to the laser beam. Always wear appropriate laser safety goggles when operating the machine. Never leave the machine unattended during operation.

• Ensure proper ventilation in the work area to dissipate fumes and smoke.
• Udržujte hořlavé materiály mimo dosah laserového gravírovacího stroje.
• Do not operate the machine if any components are damaged or missing.
• Udržujte děti a domácí zvířata mimo provozní oblast.
• Seznamte se s postupy nouzového vypnutí.

3. Obsah balení

Verify that all components are present in your SCULPFUN S10 package:

• SCULPFUN S10 Laser Engraver Frame
• 10W Diode Laser Module
• Air Assist Nozzle and Hose
• Laser Honeycomb Pad
• Power Adapter (100-240V AC, 50/60Hz input; 12V 5A output)
• USB propojovací kabel
• Sloupec s pevným fokusem
• Ochranné brýle
• Uživatelská příručka (tento dokument)
• Montážní nářadí a šrouby

Figure 3.1: SCULPFUN S10 Laser Engraver with included Air Assist and Honeycomb Pad.

4. Nastavení

4.1 Montáž

Follow the detailed assembly instructions provided in the separate assembly guide or video. Ensure all screws are tightened securely and cables are properly connected. The industrial-grade X-axis linear slide ensures high precision and stability.

Figure 4.1: Key features of the SCULPFUN S10, including the 10W laser and linear rail slide.

4.2 Air Assist Connection

The SCULPFUN S10 features a high-speed air assist nozzle. Connect an external air compressor (recommended: 30L/min, 0.03Mpa with 8mm outer diameter air outlet interface) to the auxiliary air hose (inner diameter: 7.5mm/0.29"). This significantly improves cutting performance and reduces residue.

Figure 4.2: Dimensions of the recommended SCULPFUN Air Pump for optimal air assist.

Figure 4.3: Proper connection and adjustment of the air assist system.

4.3 Instalace softwaru

The SCULPFUN S10 supports various operating software, including LaserGRBL and LightBurn, compatible with Windows and MAC systems. Install the necessary drivers and software as per the instructions provided with your chosen software. Data transfer is primarily via USB connection.

5. Operating the Laser Engraver

5.1 Kompatibilita materiálů

The SCULPFUN S10 is capable of engraving and cutting a wide range of materials:

• Materiály pro gravírování: All kinds of wood (including walnut, cherry, and other high-density wood), MDF, bamboo, cardboard, plastic, leather, PCB board, alumina, 304 stainless steel, ceramic, dark stone.
• Řezné materiály: All kinds of wood (including walnut, cherry, and other high-density wood), MDF, acrylic board, cardboard, non-woven fabric, bamboo, leather, some plastic boards, PCB boards.

Podporováno file Mezi formáty patří NC, BMP, JPG, PNG, DXF a další obrazové formáty.

5.2 Focusing Method

The S10 uses a fixed focus column with a sliding device for precise focusing. Refer to your software's guide for optimal focus settings for different materials and thicknesses.

5.3 Enhancing Performance with Air Assist

The air assist system significantly improves cutting speed and cleanliness by accelerating residue removal. This results in cleaner cuts with less charring, especially on thicker materials.

5.4 Using the Honeycomb Pad

The included laser honeycomb pad protects your work surface and improves cutting results by allowing smoke and debris to pass through, minimizing back-reflection and charring on the underside of the material.

Figure 5.1: The SCULPFUN Honeycomb Pad, measuring 400x400mm (15.75x15.75 inches), designed to protect your desktop and improve cutting quality.

Figure 5.2: The laser engraver positioned over the honeycomb pad, which is placed on a desktop protection board to prevent laser damage to the table.

6. Údržba

• Regularly clean the laser lens and nozzle to ensure optimal performance and prevent residue buildup.
• Inspect the X-axis linear slide and belts for any debris or wear. Keep the rails clean and lubricated if necessary.
• Ujistěte se, že všechna elektrická připojení jsou bezpečná a nepoškozená.
• Store the laser engraver in a clean, dry environment when not in use.

7. Řešení problémů

• Laser nefunguje: Check power connection, USB connection, and ensure the laser module is properly seated. Verify software settings for laser power and mode.
• Špatná kvalita gravírování/řezání: Adjust laser focus, power, and speed settings in your software. Ensure the material is flat and properly secured. Clean the laser lens and nozzle. Verify air assist is functioning correctly.
• Stroj se nepohybuje: Check power and USB connections. Ensure the software is connected to the machine and sending commands. Inspect belts for tension and proper alignment.
• Problémy s připojením softwaru: Reinstall drivers or software. Try a different USB port or cable.

8. Specifikace

9. Záruka a podpora

SCULPFUN products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please contact SCULPFUN customer service through their official website or the retailer where you purchased the product. Please have your product model (S10) and purchase details ready when contacting support.