BBOUNDER 10 Pack Linkable LED Utility Shop Light Instruction Manual

1. Úvod

Welcome to the instruction manual for your BBOUNDER 10 Pack Linkable LED Utility Shop Lights. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixtures. Please read this manual thoroughly before installation and retain it for future reference.

2. Bezpečnostní informace

Pro zajištění bezpečného provozu a prevenci poškození dodržujte prosím následující bezpečnostní opatření:

• Always disconnect power before installing, servicing, or cleaning the fixture.
• Do not attempt to modify or disassemble the light fixture. There are no user-serviceable parts inside.
• Ujistěte se, že zdroj napájení objtage odpovídá požadavkům svítidla (120 voltů).
• Install in accordance with all national and local electrical codes. If unsure, consult a qualified electrician.
• Do not install near heat sources or in excessively damp prostředí.
• Avoid direct eye exposure to the light source when illuminated, as it is very bright.
• Handle the fixtures with care to prevent damage to the light tubes.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny komponenty:

• BBOUNDER 4FT LED Utility Shop Lights (10 units)
• 56-inch Power Cord with Plug (10 units)
• 10-inch Hanging Chains (20 units, 2 per light)
• Ceiling Hooks (20 units, 2 per light)
• Mounting Screws (20 units, 2 per light)
• Plastic Anchors (20 units, 2 per light)

Figure 3.1: Included mounting hardware and power cord.

4. Specifikace

Obrázek 4.1: Přesview of product specifications.

5. Nastavení a instalace

These LED shop lights offer versatile installation options, including surface mounting and suspension mounting. Choose the method best suited for your application.

5.1. Instalace pro povrchovou montáž

1. Identify the desired mounting location. Mark the positions for the mounting screws, ensuring they align with the keyholes on the back of the fixture. The fixture dimensions are 46.85 inches in length.
2. Drill pilot holes at the marked locations. If mounting into drywall, insert the plastic anchors.
3. Screw the mounting screws into the pilot holes, leaving a small gap between the screw head and the surface.
4. Align the keyholes on the back of the fixture with the screw heads and slide the fixture into place. Tighten the screws to secure the fixture.

5.2. Suspension Mount Installation

1. Determine the desired hanging height and location.
2. Screw the ceiling hooks into a sturdy ceiling joist or appropriate anchor points.
3. Attach the hanging chains to the ceiling hooks and to the mounting points on the top of the light fixture.
4. Adjust the chain length to achieve the desired height and level the fixture.

Figure 5.1: Suspending and Ceiling Mounting Options.

5.3. Daisy-Chain Linkability

These lights are designed for daisy-chain linking, allowing you to connect up to 4 lights seamlessly from a single power source. This feature helps in reducing wiring complexity and saving energy.

1. Connect the power cord of the first light to a standard 120V outlet.
2. Use the included linkable connectors to connect the output end of the first light to the input end of the second light.
3. Repeat this process for up to 4 lights in a single chain.
4. Před zapnutím se ujistěte, že jsou všechna připojení zajištěna.

Figure 5.2: Daisy-Chain Connection.

Figure 5.3: Installed LED Shop Lights in a Garage Environment.

6. Návod k obsluze

Operating your BBOUNDER LED shop lights is straightforward:

• Zapnutí/vypnutí: Once installed and connected to a power outlet, use the in-line switch on the power cord to turn the lights on or off.
• Jas: The lights provide 4400 lumens of 6500K cool daylight illumination, ideal for workshops, garages, and other utility areas.
• Nestmívatelné: These fixtures are not designed for use with dimmer switches. Connecting them to a dimmer may cause damage or malfunction.

Figure 6.1: In-line Power Switch.

Figure 6.2: BBOUNDER LED Utility Shop Lights.

7. Údržba

The BBOUNDER LED shop lights are designed for long-lasting performance with minimal maintenance.

• Čištění: Ensure the fixture is turned off and unplugged before cleaning. Use a soft, dry cloth to wipe down the surface. Do not use abrasive cleaners or solvents, as they may damage the finish or polycarbonate material.
• Trvanlivost: The unique "D" shaped tube design enhances durability, reducing issues like bending tubes, dark spots, and premature failure often seen in conventional tubes.
• Bez výměny žárovky: As integrated LED fixtures, there are no bulbs to replace. The entire unit is designed for a long operational life of approximately 50,000 hours.

Figure 7.1: "D" Shaped Tube for Enhanced Durability.

8. Řešení problémů

If you encounter any issues with your BBOUNDER LED shop lights, refer to the following table for common problems and solutions:

If the problem persists after attempting these solutions, please contact BBOUNDER customer support.

9. Záruka a podpora

BBOUNDER is committed to providing high-quality products. For detailed warranty information and customer support, please refer to the following:

• Uživatelská příručka (PDF): Oficiální uživatelská příručka ve formátu PDF je k dispozici ke stažení: Stáhnout uživatelskou příručku v PDF
• Plány ochrany: Extended protection plans are available for purchase, offering additional coverage beyond the standard warranty. Options include 3-Year, 4-Year, and Complete Protect plans.
• Informace o prodejci: This product is fulfilled by Amazon and sold by Bbounder Lighting. For direct inquiries, you may visit the BBOUNDER Store on Amazon.