Zavedení
This manual provides instructions for the proper setup, operation, and maintenance of your Speedlink Table Mount (Model SL-650900-BK). This mount is designed to securely attach compatible racing wheels to a table surface, enhancing your gaming experience. Please read these instructions carefully before use.
Kompatibilita produktu
The Speedlink Table Mount is compatible with the following racing wheels:
- Speedlink DRIFT O.Z. Racing Wheel (for PC)
- Speedlink TRAILBLAZER Racing Wheel (for PC, PS4, PS3, Xbox, and Nintendo Switch)
Pokyny pro nastavení
Follow these steps to properly install the Speedlink Table Mount and attach your racing wheel:
- Prepare the Table Surface: Ensure your table surface is clean and stable. The table mount is designed for table tops with a maximum thickness of 40 millimeters.
- Umístění držáku: Place the racing wheel, with the table mount attached, onto the edge of your table where you intend to use it. Ensure the mount's clamp is positioned correctly under the table edge.
- Zajistěte držák: Tighten the hand screw on the table mount until it is firmly secured to the table. Ensure there is no movement or wobbling. The strong attachment provides maximum grip during use.
Figure 1: Diagram illustrating the table mount's attachment to a table, highlighting the 40mm maximum thickness.
Figure 2: Hands demonstrating the attachment of the table mount to a desk surface.
Figure 3: A racing wheel fully installed on the table mount, ready for use.
Návod k obsluze
Once the table mount and racing wheel are securely installed, the system is ready for use. The robust design ensures stability during intense gaming sessions. No specific operational steps are required for the mount itself beyond ensuring its secure attachment.
Údržba
To ensure the longevity and optimal performance of your Speedlink Table Mount, follow these simple maintenance guidelines:
- Čištění: Wipe the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the material.
- Zkontrolujte těsnost: Periodically check the hand screw to ensure it remains tight and the mount is securely fastened to the table. Re-tighten if any looseness is detected.
- Skladování: If not in use for an extended period, detach the mount and store it in a clean, dry place.
Odstraňování problémů
If you encounter issues with your Speedlink Table Mount, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Mount feels loose or wobbles | Hand screw not tightened sufficiently; table thickness exceeds 40mm. | Ensure the hand screw is fully tightened. Verify that your table thickness is within the 40mm limit. |
| Racing wheel is not stable on the mount | Improper attachment of the racing wheel to the mount. | Refer to your specific racing wheel's manual for instructions on how to properly attach it to a table mount. Ensure all connections are secure. |
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | SL-650900-BK |
| Rozměry produktu | 6.77 x 8.62 x 5.51 palce |
| Hmotnost položky | 15.2 unce |
| Maximum Table Thickness | 40 milimetru |
| Způsob připojení | Hand Screw Clamp |
Záruka a podpora
For warranty information or technical support, please visit the official Speedlink webnebo kontaktujte jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi.
Official Speedlink Webmísto: www.speedlink.com