Electactic 24-Inch Electric Fireplace Stove

1. Důležité bezpečnostní pokyny

Please read all instructions carefully before using this electric fireplace stove. Failure to follow these instructions may result in electric shock, fire, or personal injury.

• Krb vždy zapojujte přímo do zásuvky. Nikdy jej nepoužívejte s prodlužovacím kabelem ani s přenosným kohoutkem.
• Do not operate any fireplace with a damaged cord or plug, or if the heater malfunctions, has been dropped or damaged in any manner.
• Udržujte hořlavé materiály, jako je nábytek, polštáře, lůžkoviny, papíry, oblečení a závěsy alespoň 3 stopy (0.9 m) od přední části krbu.
• Aby nedošlo k přehřátí, nezakrývejte ohřívač.
• The air outlet is located at the top of the product. Ensure this area is not obstructed to maintain proper airflow and prevent safety hazards.
• This appliance is equipped with an automatic power-off function. If the fireplace is accidentally knocked over during use, it will automatically cut off power to enhance safety.

2. Konec produktuview

The Electactic 24-Inch Electric Fireplace Stove (Model S230B) is a free-standing infrared fireplace designed to provide warmth and ambiance. It features a realistic 3D flame effect with adjustable colors and brightness, two heating modes, and a convenient remote control.

Obrázek 1: Přední strana view of the Electactic Electric Fireplace Stove with flames active.

3. Nastavení a montáž

This section guides you through the initial setup and assembly of your electric fireplace stove.

3.1 Vybalení a kontrola

• Opatrně vyjměte všechny součásti z obalu.
• Inspect the fireplace and all parts for any signs of damage. If any damage is found, do not use the appliance and contact customer support.
• Ujistěte se, že jsou přítomny všechny položky uvedené v části „Co je v krabici“.

Figure 2: Product dimensions and included components.

3.2 Assembly of Legs

The fireplace stove requires minimal assembly, primarily attaching the four legs.

1. Carefully place the fireplace on a soft, non-abrasive surface to prevent scratching.
2. Attach each of the 4 legs to the bottom of the fireplace using the provided 8pcs M5*12 screws. A Phillips head screwdriver is required (not included).
3. Ensure all legs are securely fastened before placing the unit upright.

3.3 Umístění

Choose a suitable location for your fireplace. Consider the following:

• Umístěte jednotku na pevný, rovný povrch.
• Ensure there is adequate space around the unit for proper air circulation. Avoid placing it directly against a wall if it obstructs the rear air intake, as this can affect heating efficiency.
• Do not place the fireplace in an area where it could be easily tripped over or where the power cord could be damaged.

4. Návod k obsluze

Your Electactic electric fireplace can be operated using the included remote control or the touch light panel on the unit.

4.1 Zapnutí/vypnutí

• Zapojte napájecí kabel do standardní 120V zásuvky.
• Stiskněte tlačítko Moc button on the remote control or the touch panel to turn the appliance ON/OFF.

4.2 Adjusting Flame and Log Colors/Brightness

The fireplace features a curved LED screen for realistic 3D flame effects. You can customize the flame and log appearance.

Figure 3: Flame and log color/brightness options.

• Barvy plamenů: Použijte Color A button on the remote to cycle through 4 flame colors: Red, Yellow, Orange, Blue.
• Log Colors: Použijte Color B button on the remote to cycle through 4 log colors: Red, Yellow, Dark Red, Orange.
• Jas: Použijte Stmívač button to adjust the flame and log brightness through 5 levels (L1-L5).
• Rychlost plamene: Použijte Rychlost plamene button to adjust the flame movement speed through 5 levels (U1-U5).
• There are 16 different combinations of flame and log colors available.

4.3 Funkce topení

The fireplace offers two heating modes for efficient warmth.

Figure 4: Heating port location and power settings.

• Stiskněte tlačítko Ohřívač button on the remote or touch panel to activate heating.
• The display screen will show the heating mode: VYPNUTO (no heater), 500W (low heat), or 1500W (high heat).
• The unit can heat up to 1,000 square feet.

4.4 Funkce časovače

Nastavte časovač pro automatické vypnutí.

Figure 5: Remote control layout.

• Stiskněte tlačítko Časovač tlačítko na dálkovém ovladači.
• Cycle through the available timer settings (1-8 hours) to select your desired shut-off time.

4.5 Provoz s nízkou hlučností

The fireplace operates at a low noise level, typically below 40dB, ensuring it does not disturb sleep or daily activities.

Figure 6: Illustration of low noise operation and timer convenience.

5. Údržba

To ensure the longevity and optimal performance of your Electactic electric fireplace, follow these general maintenance guidelines:

• Čištění: Před čištěním se ujistěte, že je jednotka vypnutá a odpojená od sítě. Použijte měkký,amp hadříkem otírejte vnější povrchy. Nepoužívejte abrazivní čisticí prostředky ani spreje.
• Větrací otvory: Periodically check and clean the air intake and outlet vents to ensure they are free from dust and debris. Blocked vents can reduce heating efficiency and pose a fire hazard.
• Skladování: If storing the fireplace for an extended period, unplug it and store it in a dry, cool location, preferably in its original packaging.

6. Řešení problémů

This section addresses common issues you might encounter with your electric fireplace.

If you experience any issues not covered in this section, please contact customer support.

7. Specifikace

8. Záruka a podpora

8.1 Informace o záruce

This product comes with a Free Return and Replacement warranty. Please refer to your purchase documentation for specific terms and conditions regarding returns and replacements.

8.2 Zákaznická podpora

For any questions, technical assistance, or warranty claims, please contact Electactic customer support through the retailer where the product was purchased. Keep your purchase receipt and model number (S230B) handy for faster service.