Maxxima MRL-S40905

Maxxima 4 in. 5 CCT Ultra Thin Recessed LED Downlight Instruction Manual

Model: MRL-S40905

Zavedení

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Maxxima 4-inch 5 CCT Ultra Thin Recessed LED Downlight. Please read all instructions carefully before installation and retain this manual for future reference.

Maxxima 4-inch 5 CCT Ultra Thin Recessed LED Downlight

Obrázek: Přední strana view of the Maxxima 4-inch 5 CCT Ultra Thin Recessed LED Downlight.

Bezpečnostní informace

Abyste snížili riziko požáru, úrazu elektrickým proudem nebo zranění osob, dodržujte prosím následující bezpečnostní opatření:

  • Před zahájením instalace nebo prováděním jakékoli údržby vždy vypněte napájení jističem.
  • Ujistěte se, že všechna elektrická připojení splňují místní předpisy a vyhlášky, stejně jako Národní elektrotechnický předpis (NEC).
  • Pokud si nejste jisti zapojením, poraďte se s kvalifikovaným elektrikářem.
  • Neinstalujte zařízení na místech, kde provozní teplota překračuje jmenovitou teplotu svítidla.
  • Toto svítidlo je vhodné pro damp locations and is IC Rated, meaning it is safe for direct contact with insulation.
  • Neupravujte svítidlo ani jej nepoužívejte k jiným účelům, než ke kterým je určeno.

Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

  • 1 x Maxxima 4 in. 5 CCT Ultra Thin Recessed LED Downlight
  • 1 x Junction Box (J-Box) with integrated power supply
  • Montážní hardware

Specifikace

FunkceSpecifikace
Číslo modeluMRL-S40905
Velikost4 palců
Wattage10W (ekvivalent 60W žárovky)
Lumen výstup750 XNUMX lumenů
Teplota barev (CCT)Volitelné: 2700K, 3000K, 3500K, 4000K, 5000K
svtage120VAC
StmívatelnéYes (20% - 100% with compatible LED dimmer)
CRI82
MateriálHliník
Typ instalaceZapuštěná montáž, bez krytu
CertifikaceIC Rated, ETL Listed
Rozměry rozvodné krabice1.4” V x 2.7” Š x 4.11” H
Rozměry svítidla4.8” Diameter x 0.87” Thickness

Nastavení a instalace

Pro správnou instalaci postupujte podle následujících kroků:

  1. Vypnout napájení: Before starting any electrical work, ensure the power supply to the installation area is turned off at the circuit breaker.
  2. Prepare Ceiling Opening: Cut a 4-inch diameter hole in the ceiling at the desired location. Ensure there are no obstructions such as joists or pipes.
  3. Připojení kabeláže: Open the junction box cover. Connect the supply wires to the wires inside the junction box using the provided wire nuts:
    • Connect the black wire from the supply to the black wire of the J-Box.
    • Connect the white wire from the supply to the white wire of the J-Box.
    • Connect the ground wire from the supply to the green wire of the J-Box.
    Secure the junction box cover.
  4. Maxxima LED Downlight with J-Box

    Image: The LED downlight connected to its junction box.

  5. Vyberte teplotu barev (CCT): Before inserting the light into the ceiling, locate the CCT selection switch on the side of the junction box. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch.
  6. Close-up of CCT selection switch on J-Box

    Obrázek: Detail view of the CCT selection switch located on the side of the junction box.

  7. Vložte rozvodnou krabici: Place the wired junction box into the ceiling opening.
  8. Instalace downlightu: Connect the downlight to the junction box via the male/female connector. Push the spring clips on the sides of the downlight upwards and insert the fixture into the ceiling hole. The clips will automatically secure the light in place.
  9. Strana view of downlight with spring clips

    Obrázek: Boční view of the downlight showing the tension spring clips used for installation.

  10. Obnovit napájení: Znovu zapněte napájení na jističi.

Návod k obsluze

Výběr teploty barev

The Maxxima 4-inch LED Downlight features 5 CCT (Correlated Color Temperature) options, allowing you to customize the light output to your preference. The selection switch is located on the side of the junction box.

  • 2700 tis.: Soft White (Warm, inviting light)
  • 3000 tis.: Warm White (Slightly brighter, still warm)
  • 3500 tis.: Bright White (Neutral, balanced light)
  • 4000 tis.: Neutral White (Cooler, more energetic light)
  • 5000 tis.: Daylight (Brightest, closest to natural daylight)

To change the CCT, you must access the junction box. It is recommended to select your preferred CCT before final installation into the ceiling. If changing after installation, ensure power is off before accessing the J-Box.

Diagram showing 5 CCT options

Image: Visual representation of the five selectable color temperatures.

Funkce stmívání

This LED downlight is dimmable from 20% to 100% when used with a compatible LED dimmer switch. Ensure your dimmer switch is rated for LED lighting to prevent flickering or damage to the fixture.

Údržba

LED svítidlo Maxxima vyžaduje minimální údržbu.

  • Čištění: Před čištěním se ujistěte, že je zařízení vypnuté. Otřete svítidlo měkkým, suchým nebo lehce navlhčeným hadříkem.amp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit povrchovou úpravu nebo elektrické součástky.
  • Žádné díly opravitelné uživatelem: LED světelný zdroj je integrovaný a nelze jej vyměnit. Nepokoušejte se svítidlo otevírat ani opravovat.

Odstraňování problémů

If you encounter issues with your downlight, refer to the following table:

ProblémMožná příčinaŘešení
Světlo se nerozsvítíŽádné napájení
Uvolněné připojení kabeláže
Faulty switch or circuit breaker
Check circuit breaker and wall switch. Ensure all wiring connections are secure. Test with a known working fixture or consult an electrician.
Světlo bliká nebo se nesprávně ztlumujeNekompatibilní spínač stmívače
Uvolněné vedení
Ujistěte se, že používáte stmívač kompatibilní s LED diodami. Zkontrolujte zapojení kabeláže.
Nesprávná teplota barevNesprávně nastavený spínač CCTTurn off power, access the junction box, and adjust the CCT selection switch to the desired setting.

Záruka

This Maxxima LED Downlight is covered by a 3-letá záruka from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Maxxima customer support.

Zákaznická podpora

For technical assistance, troubleshooting, or warranty inquiries, please contact Maxxima customer support. Refer to the product packaging or the official Maxxima webstránky s aktuálními kontaktními informacemi.

Please have your model number (MRL-S40905) and date of purchase available when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.