1. Úvod
This manual provides detailed instructions for the Walfront 8-Channel RJ45 Ethernet TCP/IP Remote Control Relay Module. This device is designed for industrial and home automation applications, allowing remote control of electrical circuits via an Ethernet network. It features 8 independent relay channels and supports TCP/IP communication with an integrated web server for easy access and configuration.
Obrázek 1: Nahoře view of the Walfront 8-Channel RJ45 Ethernet TCP/IP Remote Control Relay Module, showing the LAN 485 label, 12V power input, reset button, and screw terminals for relay outputs.
2. Klíčové vlastnosti
- TCP/IP RJ45 Ethernet Port: Configurable IP address for network integration.
- Integrovaný Web Server: Enables remote access and control of relays via a web prohlížeč.
- 8 Independent Relay Channels: Each channel supports 250V/AC 10A switching.
- 8 External Control Outputs: Active low level outputs for controlling switches or sensors.
- Vzdálený přístup: Supports re-engineering protocol for router connection, allowing global access control via Android, tablet, or other systems.
3. Nastavení
3.1 Fyzická připojení
- Napájení: Connect a 9V DC power supply to the 12V input terminal. Ensure correct polarity.
- Ethernetové připojení: Connect a standard RJ45 Ethernet cable from your network router or switch to the RJ45 port on the module.
- Reléové výstupy: Connect the devices you wish to control to the 8 relay output screw terminals. Each relay can switch up to 250V/AC at 10A. Refer to the diagram below for terminal identification.
- External Control Inputs: If using external switches or sensors, connect them to the 8 external control input terminals. These inputs are active low.
Obrázek 2: Úhlové view of the module, highlighting the RJ45 Ethernet port and the green screw terminals for relay outputs and external control inputs.
3.2 Počáteční konfigurace sítě
Upon initial power-up, the module will attempt to obtain an IP address via DHCP. If DHCP is not available or if a static IP is preferred, the IP address can be configured through the module's web interface or a dedicated configuration tool (if provided by the manufacturer). Consult the manufacturer's documentation for default IP addresses or configuration utility details.
4. Návod k obsluze
4.1 Přístup k Web Rozhraní
- Ensure the module is powered on and connected to your network.
- Otevřete a web prohlížeč na počítači připojeném ke stejné síti.
- Enter the module's IP address into the browser's address bar (e.g., http://192.168.1.100).
- The web interface will load, displaying the status of the 8 relays and providing controls to switch them on or off.
4.2 Controlling Relays
V rámci web interface, each relay channel will have a corresponding control element (e.g., a button or toggle switch). Click or tap these elements to change the state of the respective relay (ON/OFF). The module will respond by physically switching the connected device.
4.3 Using External Control Inputs
The 8 external control inputs can be used to trigger actions or monitor states from external devices like switches or sensors. When an input receives an active low signal, the module can be configured to perform a specific action, such as changing a relay state or sending a notification. Refer to the module's web interface or advanced documentation for configuring these input actions.
4.4 Remote Access via Router
For global access, connect the module to a router and configure port forwarding or use the provided re-engineering protocol. This allows control of the module from anywhere with internet access using a compatible application on Android, tablet, or other systems. Consult your router's manual and the module's advanced documentation for specific instructions on remote access configuration.
5. Údržba
5.1 Čištění
To clean the module, disconnect it from all power sources and networks. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners, solvents, or abrasive materials, as these can damage the device.
5.2 Environmentální hlediska
Ensure the module is operated within its specified temperature and humidity ranges. Avoid exposing the device to direct sunlight, excessive moisture, dust, or corrosive environments. Proper ventilation is recommended to prevent overheating.
6. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Modul se nezapne. | Není připojený zdroj napájení nebo je zdroj vadný. | Verify power supply connection and ensure it provides 9V DC. Test with a known working power supply. |
| Nelze získat přístup web rozhraní. | Incorrect IP address, network cable disconnected, or network configuration issue. | Check network cable connection. Verify the module's IP address. Ensure your computer is on the same network segment. Try resetting the module. |
| Relays do not switch. | Incorrect wiring, overload, or module malfunction. | Check relay wiring for correct connections. Ensure the load does not exceed 250V/AC 10A. If the issue persists, contact support. |
| External inputs not responding. | Incorrect wiring, input not active low, or configuration issue. | Verify wiring of external devices. Ensure the input signal is active low. Check the module's configuration for input actions. |
7. Specifikace
| Parametr | Hodnota |
|---|---|
| Značka | Walfront |
| Číslo modelu | Walfrontui9mgdct586176-02 |
| Rozměry (balení) | 15 x 10 x 5 cm |
| Hmotnost (balení) | 267 gramů |
| Země původu | Čína |
| Typ konektoru | RJ45, Screw Terminal |
| Kontaktní materiál | Copper-based alloy |
| Aktuální hodnocení | 10 A |
| Typ montáže | Montáž do zásuvky |
| Provozní režim | Automatický |
| Spotřeba energie | 1.6 wattů |
| Coil Voltage | 9 V (DC) |
| Minimální spínací svtage | 9 V (DC) |
8. Informace o záruce
Specific warranty information for this product is not available in the provided data. Please refer to the product packaging or contact the seller/manufacturer directly for warranty details.
9. Podpora
For technical assistance, troubleshooting beyond this manual, or inquiries regarding product functionality, please contact Walfront customer support or the retailer from whom the product was purchased. Refer to their official website or contact information provided with your purchase for assistance.