Tektronix MSO22 2-BW-100 Mixed Signal Oscilloscope

Zavedení

This manual provides essential information for the safe and efficient operation of your Tektronix MSO22 2-BW-100 Mixed Signal Oscilloscope. This instrument is designed for precise measurement and analysis of electronic signals, featuring a 100 MHz bandwidth and 2 analog channels.

Mezi klíčové vlastnosti patří:

• Analog input channels: 2 inputs
• Šířka pásma: 100 MHz
• Sample rate: 2.5 GS/s Half channels; 1.25 GS/s All channels
• Record length: 10 Mpoints per channel
• Vertical resolution: 8 bits ADC; Up to 16 bits in high-resolution mode

Nastavení a připojení

Before operating the oscilloscope, ensure it is placed on a stable, level surface with adequate ventilation. Connect the power cord to the instrument and a grounded AC outlet.

Figure 1: Front panel of the Tektronix MSO22 2-BW-100 Oscilloscope, showing the display, control knobs, buttons, and input connectors (Inputs 1, 2, Aux In, AFG/Aux Out).

Vstupní připojení

• Analog Inputs (1, 2): Connect your probes to these BNC connectors for signal acquisition.
• Aux In: Auxiliary input for external trigger or other signals.
• AFG/Aux Out: Output for the Arbitrary Function Generator or auxiliary signals.

Zapnout

Press the power button located on the front panel to turn on the instrument. Allow a few moments for the system to boot up.

Návod k obsluze

This section outlines the basic steps for operating the oscilloscope to capture and analyze waveforms.

Basic Waveform Capture

1. Připojení sondy: Attach a compensated probe to one of the analog input channels (e.g., Input 1).
2. Připojení k obvodu: Connect the probe tip to the test point in your circuit and the ground clip to the circuit's ground.
3. Automatické nastavení: Stiskněte tlačítko Auto-Set button (if available, common on oscilloscopes) to automatically adjust vertical and horizontal settings for a stable display.
4. Upravit vertikální měřítko: Použijte Vertikální měřítko knob to adjust the volts per division, controlling the amplitude of the waveform on the screen.
5. Upravit horizontální měřítko: Použijte Horizontální měřítko knob to adjust the seconds per division, controlling the time base of the waveform.
6. Úprava spouště: Použijte Spouštěcí úroveň knob to set the voltage level at which the oscilloscope captures the waveform, ensuring a stable display.

Funkce měření

The MSO22 2-BW-100 offers various automated measurement functions. Access these through the on-screen menu system. Common measurements include Peak-to-Peak Voltage, Frequency, Period, and Rise/Fall Time.

Údržba

Správná údržba zajišťuje dlouhou životnost a přesnost vašeho osciloskopu.

Čištění

• Vnější povrchy otřete měkkým, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Ensure no liquid enters the instrument.
• Clean the display screen with a soft, lint-free cloth specifically designed for electronic displays.

Kalibrace

For optimal performance, periodic calibration by qualified service personnel is recommended. Refer to the official Tektronix service manual for calibration procedures and intervals.

Odstraňování problémů

Tato část obsahuje řešení běžných problémů, se kterými se můžete setkat.

• Bez displeje:
  • Ensure the power cord is securely connected and the instrument is powered on.
  • Check the brightness and contrast settings of the display.
• Nestabilní tvar vlny:
  • Adjust the trigger level and trigger source settings.
  • Verify the probe compensation is correct.
  • Check for proper grounding of the probe and the circuit under test.
• Nebyl detekován žádný signál:
  • Ensure the probe is correctly connected to the input channel and the circuit.
  • Check the input coupling (AC/DC/GND) and vertical scale settings.
  • Verify the signal source is active.

If problems persist, contact Tektronix customer support.

Specifikace

Detailed technical specifications for the Tektronix MSO22 2-BW-100 Mixed Signal Oscilloscope.

Záruka a podpora

Tektronix products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty statement included with your purchase or visit the official Tektronix webmísto.

For technical support, service, or additional documentation, please contact Tektronix customer service or visit their official support portal. Ensure you have your product model number (MSO22 2-BW-100) and serial number ready when contacting support.

Online zdroje: www.tek.com