Zavedení
Thank you for choosing the VOYSIGN Outdoor Steel Dining Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new dining table. Please read these instructions thoroughly before assembly and retain them for future reference.
Image: The VOYSIGN Outdoor Steel Dining Table, model VS01ST003N-7, shown fully assembled on a patio, complete with chairs and an umbrella. This image provides a visual representation of the product in an outdoor setting.
Bezpečnostní informace
Dodržujte prosím následující bezpečnostní opatření, abyste předešli zranění a poškození produktu:
- Vždy pečlivě dodržujte pokyny k montáži, abyste předešli zranění.
- Ensure the table is properly anchored to prevent tipping.
- Do not expose the table to harsh weather conditions without proper care and maintenance.
- Během montáže uchovávejte všechny malé díly a obalové materiály mimo dosah dětí.
- Assemble on a soft, clean surface to prevent scratching the table's finish.
Seznam dílů
Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, contact customer support immediately.
- Tabletop sections (2 pieces)
- Nohy stolu (4 kusy)
- Support brackets (6 pieces)
- Slatted metal plate (1 piece, for storage shelf)
- Sada hardwaru (šrouby, matice, podložky)
- Assembly tools (included)
Image: An exploded diagram illustrating the installation procedure, detailing various components labeled A through N. This visual aid helps identify all parts required for assembly.
Nastavení a montáž
Assembly typically takes one person approximately 10 minutes. Follow these steps carefully:
- Rozbalte komponenty: Carefully remove all parts from the packaging. Place them on a soft, flat surface to prevent scratches.
- Sestavení stolní desky: Join the two tabletop sections (A) together using the provided hardware (I, G, H). Ensure they are aligned correctly.
Tip: Do not fully tighten screws until all components are aligned. - Připevněte nohy: Secure the table legs (B) to the tabletop assembly (A) using the appropriate bolts and washers (C, D, F). The six brackets on the legs (as shown in image) ensure stability.
- Instalace úložné police: Attach the slatted metal plate (K) to the designated support points (L) between the legs to create the storage shelf.
- Konečné utažení: Once all parts are loosely assembled and aligned, gradually tighten all screws and bolts securely. Do not overtighten.
- Kontrola stability: Gently shake the table to ensure it is stable and all connections are firm.
Obrázek: Podrobný view of the table's leg structure, highlighting the six brackets designed to enhance stability and support.
Image: A close-up of the slatted metal plate positioned beneath the tabletop, illustrating its function as a convenient storage shelf.
Návod k obsluze
The VOYSIGN Outdoor Steel Dining Table is designed for outdoor dining and general use. It features a 1.57-inch diameter umbrella hole for shade. Ensure the table is placed on a level surface to prevent wobbling.
Obrázek: Podrobný view of the umbrella hole integrated into the tabletop, indicating an inside diameter of 1.57 inches for standard patio umbrellas.
Péče a údržba
To ensure the longevity and appearance of your VOYSIGN dining table, follow these maintenance guidelines:
- Čištění: Stůl pravidelně otírejte reklamouamp hadříkem a jemným mýdlem. Nepoužívejte abrazivní čisticí prostředky ani agresivní chemikálie, které by mohly poškodit práškový lak.
- Prevence rzi: The table features a durable powder coating for rust resistance. However, to maximize its lifespan, avoid prolonged exposure to standing water or extreme weather conditions. Cover the table when not in use or during inclement weather.
- Inspekce: Pravidelně kontrolujte všechny šrouby a vruty, zda jsou pevně utažené. V případě potřeby je dotáhněte.
Image: This image demonstrates the weather-resistant properties and powder coating of the table's surface, highlighted by water droplets beading on the material.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Stůl se po sestavení kymácí. | Screws or bolts are not fully tightened; uneven assembly. | Ensure all fasteners are securely tightened. Loosen all fasteners slightly, adjust the table on a flat surface, then retighten. |
| Díly se během montáže nezarovnávají. | Fasteners were tightened too early; incorrect orientation of parts. | Do not tighten screws until all parts are loosely assembled and aligned. Review the assembly diagram for correct part orientation. |
| Chybějící nebo poškozené díly. | Chyba balení nebo poškození při přepravě. | Contact customer support immediately for replacement parts. Refer to the "Warranty and Support" section. |
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | VS01ST003N-7 |
| Značka | VOYSIGN |
| Rozměry produktu (D x Š x V) | 38" x 59" x 28" (96.5 cm x 149.9 cm x 71.1 cm) |
| Hmotnost položky | 40 liber (18.1 kg) |
| Materiál rámu | Legovaná ocel |
| Typ horního materiálu | Legovaná ocel |
| Barva | Charcoal-Black |
| Průměr otvoru pro deštník | 1.57 palců (4 cm) |
| Kapacita míst | 6 lidí |
| Požadovaná montáž | Ano |
| Vnitřní/venkovní použití | Venkovní |
Image: A diagram illustrating key product data including dimensions (width 38", height 28", length 60"), product weight (40 lbs), and weight capacity (176 lbs).
Záruka a podpora
Záruka: This VOYSIGN product comes with a 1-year warranty from the date of purchase. The manufacturer also provides lifetime accessories and parts supply after-sale service.
Zákaznická podpora: For any further questions, assistance with assembly, missing parts, or warranty claims, please contact our service team. You can typically find contact information on the product packaging or through the retailer where the product was purchased.
Manufacturer: VOYSIGN