Zavedení
Thank you for choosing the Tailcas USB Rechargeable Motion Sensor Cabinet Light. This manual provides detailed instructions for the safe and efficient use of your new light. Please read it thoroughly before installation and operation, and retain it for future reference.
Bezpečnostní informace
- This product is designed for indoor use only. Do not expose it to rain or moisture.
- Do not disassemble, repair, or modify the product. This may cause damage, electric shock, or fire.
- Uchovávejte zařízení mimo dosah zdrojů tepla, přímého slunečního záření a hořlavých materiálů.
- Používejte pouze specifikovaný nabíjecí objemtage (5V USB).
- Nedívejte se přímo do rozsvíceného LED světla, mohlo by to způsobit namáhání očí.
- Uchovávejte mimo dosah dětí.
Obsah balení
Zkontrolujte prosím balení, zda neobsahuje následující položky:
- Tailcas Motion Sensor Cabinet Light (3 units)
- Magnetické proužky
- Oboustranná lepicí páska
- USB Charging Cable (not explicitly listed but implied by 'USB Rechargeable')
Vlastnosti produktu
- Pohybový a světelný senzor: Automatically turns on when motion is detected in dark environments.
- USB dobíjecí: Built-in 2000mAh high-capacity battery.
- Tři provozní režimy: Sensor Mode, Always On Mode, Always Off Mode.
- Nastavitelný jas: Dimmable from 5% to 100% in Always On Mode.
- Funkce paměti: Remembers the last brightness setting.
- Snadná instalace: Multiple mounting options including magnetic, adhesive, and hanging.
Image: Comparison highlighting the 26 LED design and USB rechargeable battery of the Tailcas light.
Instalace
The Tailcas Motion Sensor Cabinet Light offers three convenient installation methods:
- Magnetický nástavec: The light has built-in magnets. Simply attach it to any ironwork surface.
- Lepicí montáž: For non-metallic surfaces, use the provided magnetic strip with double-sided adhesive tape. Peel off the protective film from one side of the adhesive tape and attach it to the magnetic strip. Then, peel off the other side and firmly press the magnetic strip onto your desired clean, dry surface. The light can then be magnetically attached to this strip.
- Závěsný: The light features hanging holes on the back. You can hang it on nails or hooks for a secure fit.
Image: Visual guide demonstrating magnetic, adhesive, and hanging installation options.
Ensure the installation surface is clean and dry for optimal adhesion.
Operace
The light features a push-button switch to cycle through its three operating modes and adjust brightness.
Provozní režimy:
- Mode 1: Sensor Mode (Automatic)
In this mode, the light will automatically turn on when motion is detected within a 10-foot (3-meter) range and 120-degree angle in a dark environment. It will automatically turn off after approximately 20 seconds of no motion. - Režim 2: Režim vždy zapnuto
The light remains continuously on, regardless of motion or ambient light conditions. - Mode 3: Always Off Mode
Světlo zůstává vypnuté.
Nastavení jasu:
In Vždy zapnutý režim, you can adjust the brightness from 5% to 100% by pressing and holding the control button. The light has a memory function that will recall your last brightness setting when you switch back to Always On Mode.
Image: Visual representation of the Sensor, Always On, and Always Off modes.
Image: Illustration of the motion and light sensor's detection capabilities.
Nabíjení
The Tailcas Motion Sensor Cabinet Light is equipped with a 2000mAh rechargeable lithium-polymer battery.
- Connect the provided USB charging cable to the light's charging port and to a 5V USB power source (e.g., power bank, USB charger, laptop).
- A red indicator light typically signifies that the device is charging.
- The indicator light will turn green or off when the battery is fully charged.
- Plné nabití trvá přibližně 2-3 hodiny.
- Once fully charged, the light can last up to 50 days in Sensor Mode or 5-6 hours in Always On Mode, depending on usage.
Image: Details on the 2000mAh rechargeable battery, charging process, and battery life.
Údržba
- Clean the light with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the motion sensor lens is clear of dust and obstructions for optimal performance.
- Pokud baterii skladujete delší dobu, pravidelně ji nabíjejte, abyste prodloužili její životnost.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Light does not turn on in Sensor Mode. | 1. Insufficient ambient light (sensor mode only activates in dark). 2. No motion detected. 3. Battery is low or depleted. | 1. Test in a darker environment. 2. Ensure motion is within the detection range. 3. Charge the light. |
| Light stays on constantly in Sensor Mode. | Continuous motion within detection range. | Relocate the light to an area with less constant activity or switch to Always Off Mode. |
| Světlo se nenabíjí. | 1. Faulty USB cable or power adapter. 2. Nabíjecí port je poškozený. | 1. Try a different USB cable and power adapter. 2. Contact customer support if the port is damaged. |
| Nefunguje nastavení jasu. | Not in Always On Mode. | Switch the light to Always On Mode to adjust brightness. |
Specifikace
| Značka | Tailcas |
| Číslo modelu | 582ff97f-c4e1-494d-b473-05c1bf189514 |
| Rozměry (D x Š x V) | 20 x 3.3 x 1.5 cm |
| Hmotnost | 290 gramů |
| Materiál | Železo |
| Zdroj napájení | Rechargeable Battery (2 Lithium-polymer, 2000mAh) |
| svtage | 5 voltů |
| Wattage | 1.5 wattů |
| Typ světla | LED (26 žárovky) |
| Světlá barva | Bílý |
| Světelná účinnost | 260 lumens (90 lm/W) |
| Kontrolní metoda | Touch (Push-button) |
| Rozsah snímače pohybu | 10 feet (3 meters), 120 degrees |
| Vodotěsná úroveň | Not waterproof (Indoor use only) |
| Typ instalace | Adhesive/Magnet Mounting |
Záruka a podpora
Tailcas products are manufactured to high-quality standards. For any questions, concerns, or technical support regarding your product, please refer to the retailer's return policy or contact Tailcas customer service through the platform where you purchased the item. Please have your purchase details and model number ready.