GAMEMAX Master M905

GAMEMAX Master M905 Full Tower PC Chassis User Manual

Model: Master M905 | Brand: GAMEMAX

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your GAMEMAX Master M905 Full Tower PC Chassis. Please read this manual thoroughly before beginning assembly or use to ensure proper functionality and longevity of your product.

The GAMEMAX Master M905 is a full tower chassis designed for high airflow and extensive hardware compatibility, supporting E-ATX, ATX, and M-ATX motherboards. It features ample storage options, efficient cooling with pre-installed LED fans, and a user-friendly design for system builders.

Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

  • GAMEMAX Master M905 Full Tower Chassis
  • 3 x 12cm 32 LEDs Blue Cooling Fans (pre-installed)
  • Sada příslušenství (šrouby, distanční sloupky, stahovací pásky atd.)
  • Uživatelská příručka (tento dokument)

Nastavení a instalace

Follow these steps for initial setup and component installation:

1. Příprava podvozku

Carefully remove the chassis from its packaging. Place it on a stable, flat surface. Remove the side panels by unscrewing the thumb screws at the rear of the chassis and sliding the panels backward.

GAMEMAX Master M905 PC case with side panel removed, showing internal layout

Obraz: Vnitřní view of the GAMEMAX Master M905 chassis with the side panel removed, illustrating the spacious interior and drive bays.

2. Instalace základní desky

Install the I/O shield into the rear opening of the chassis. Align your E-ATX, ATX, or M-ATX motherboard with the pre-installed standoffs. Secure the motherboard using the provided screws from the accessory kit.

Diagram showing motherboard and component compatibility within the chassis

Obraz: Diagram illustrating the internal layout and compatibility for E-ATX/ATX/M-ATX motherboards, maximum VGA card length, and CPU cooler height.

3. Instalace napájecího zdroje (PSU)

The Master M905 features a bottom-mounted PSU design. Install your power supply into the designated compartment at the bottom rear of the chassis. Secure it with screws from the outside rear of the case.

Diagram showing bottom-mounted PSU design with cable management

Obraz: Illustration of the bottom-mounted PSU design, highlighting the hidden compartment and cable management options for a cleaner build.

4. Instalace úložného disku

The chassis supports multiple storage configurations:

  • 5.25" ODDs: Install up to three 5.25" optical disk drives in the front bays.
  • 3.5" HDDs / 2.5" SSDs: Utilize the eight 3.5" HDD bays or eight 2.5" SSD bays. Note: Installing longer VGA cards may require removing the middle HDD bracket.
Diagram showing 10 HDD positions and large storage space

Obraz: Podrobný diagram ukazujeasing the extensive storage capabilities, including 8 HDD bays and 2 SSD positions, along with cable management features.

5. Grafická karta a rozšiřující karty

Install your graphics card and other expansion cards into the appropriate PCIe slots on your motherboard. Ensure they are securely fastened. The chassis supports VGA cards up to 450mm in length.

6. Správa kabelů

Utilize the cable routing options behind the motherboard tray to organize and hide cables. This improves airflow and aesthetics.

7. Připojení I/O na předním panelu

Connect the front panel cables (USB 3.0, USB 2.0, audio, power, reset, LED indicators) to the corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.

Close-up of the top front panel I/O ports and fan controller

Obraz: Detailní záběr view of the top panel, showing the USB 3.0, USB 2.0, audio ports, power button, reset button, and fan controller switches.

Návod k obsluze

Zapnutí/vypnutí

Press the power button located on the top panel to turn your system on or off. A short press typically initiates power on, while a longer press (usually 4-5 seconds) will force a shutdown.

Ovládání ventilátoru

The top panel includes a fan controller. Use the switches to adjust the speed of the connected fans, allowing you to balance cooling performance and noise levels according to your preference.

Připojení předního panelu

Utilize the front panel USB 3.0 and USB 2.0 ports for connecting peripherals and external storage devices. The audio jacks provide convenient access for headphones and microphones.

Údržba

Regular maintenance helps ensure optimal performance and extends the lifespan of your PC chassis.

Čištění prachového filtru

The Master M905 features filtered front, top, and base air intakes with pull-out dust filters. Regularly remove and clean these filters to prevent dust buildup inside the chassis, which can impede airflow and component cooling.

Zadní view of GAMEMAX Master M905 PC case showing removable dust filters

Obraz: Zadní a spodní view of the chassis, highlighting the easily accessible, pull-out dust filters for convenient cleaning.

Čištění interiéru

Periodically open the side panels and use compressed air to remove dust from internal components, especially fan blades and heatsinks. Ensure the system is powered off and unplugged before cleaning.

Odstraňování problémů

If you encounter issues with your chassis, refer to the following common problems and solutions:

  • Systém se nezapne:
    • Ujistěte se, že je napájecí zdroj správně připojen k zásuvce ve zdi a k ​​základní desce.
    • Verify all front panel power switch cables are correctly connected to the motherboard headers.
    • Check if the power supply unit (PSU) switch is in the "ON" position.
  • Fans are not spinning or LEDs are off:
    • Confirm fan power cables are securely connected to the motherboard or fan controller.
    • Check the fan controller settings on the top panel.
    • Ensure LED power cables are connected if applicable.
  • Front panel USB/Audio ports not working:
    • Verify that the front panel USB and audio cables are correctly connected to the corresponding headers on your motherboard.
    • Check your motherboard's BIOS/UEFI settings to ensure USB/audio ports are enabled.
  • Excessive dust buildup:
    • Regularly clean the pull-out dust filters as described in the Maintenance section.
    • Ensure proper airflow direction with intake and exhaust fans.

Specifikace

FunkceDetail
Název modeluMistr M905
ZnačkaGAMEMAX
Typ pouzdraPlná věž
Kompatibilita základní deskyE-ATX, ATX, M-ATX
Rozměry (DxŠxV)20.16 x 8.26 x 20.75 palce (512 x 210 x 527 mm)
Hmotnost položky23.4 libry (10.6 kg)
MateriálLegovaná ocel
BarvaČerný
5.25" pozice pro mechaniky3
3.5" HDD Bays8
2.5" SSD Bays8
Přední I / O porty2 x USB 3.0, 2 x USB 2.0, HD Audio (Mic/Headphone), Fan Controller
Předinstalované ventilátory3 x 12cm 32 LEDs Blue Fans (Front)
Maximální délka karty VGA450 mm
Maximální výška chladiče CPU170 mm
Typ montáže zdrojeRear Mount (Bottom)
Způsob chlazeníAir, Water (supports 240/280/360mm radiators)
Dimensional drawing of the GAMEMAX Master M905 PC case

Obraz: A diagram illustrating the key dimensions of the GAMEMAX Master M905 chassis.

Záruka a podpora

GAMEMAX products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the official GAMEMAX webwebu nebo se obraťte na svého místního prodejce.

Pro další pomoc prosím navštivte Obchod GAMEMAX na Amazonu or consult the manufacturer's official support channels.

© 2024 GAMEMAX. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.