GOLDFOX Bike Tail Light with Turn Signal

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your GOLDFOX Bike Tail Light with Turn Signal. This product is designed to enhance cycling safety by providing clear turn signals and various lighting modes for visibility during night rides or adverse weather conditions. It features a remote control for easy operation, USB rechargeable batteries, and a waterproof design.

The system includes four turn signal units and a remote control, allowing for both front and rear signal functionality. The lights offer five distinct modes to adapt to different riding environments and safety needs.

Co je v krabici

Opatrně vybalte obsah a ujistěte se, že jsou přítomny všechny položky:

• 4 x Turn Signal Units
• 1 x Rechargeable Remote Control
• 1 x Double Charging USB Cable
• 1 x Rear Seat Tube Bracket
• 4 x Small Bar Brackets
• 12 x Frictional Pad Stickers
• 6 x gumičky

Obrázek 1: Veškeré dodávané příslušenství a komponenty.

Nastavení a instalace

Follow these steps to install and pair your GOLDFOX Bike Tail Light with Turn Signal:

1. Mounting the Turn Signal Units

The turn signal units can be mounted on various parts of your bicycle, such as handlebars, seat posts, or forks, using the provided brackets and rubber bands. Choose locations that offer maximum visibility to other road users.

Figure 2: Installation steps for front and rear turn signals.

2. Mounting the Remote Control

Attach the remote control to your handlebar using the small bracket and rubber O-ring, ensuring it is within easy reach for safe operation while riding.

3. Pairing the Lights with the Remote Control

To ensure proper functionality, the turn signal units must be paired with the remote control. Refer to the video below for a visual guide on the pairing process.

Figure 3: Step-by-step visual guide for pairing the turn signals.

Návod k obsluze

The remote control allows you to easily switch between different lighting modes and activate turn signals.

Activating Turn Signals

Press the left or right arrow button on the remote control to activate the corresponding turn signal. The signal will flash to indicate your intended direction.

Přepínání režimů osvětlení

Press the central switch button on the remote control to cycle through the available lighting modes. The modes are designed for various visibility needs:

1. Režim 1: Red light keeps flashing (for night caution).
2. Režim 2: Red light and yellow turn light keep flashing (warning).
3. Režim 3: LED direction indicator OFF. (Turn signals can only be activated by remote in Mode 1 & 3. Please switch to Mode 3 after use for battery-saving by the Remote or LED Direction Indicator.)

Obrázek 4: Vizuální znázornění 5 režimů osvětlení.

Figure 5: Turn signals in action on a bicycle.

Nabíjení

The GOLDFOX Bike Tail Light with Turn Signal is USB rechargeable. Use the provided double charging USB cable to charge the units. The charging port is designed for convenience and compatibility with various USB power sources.

• Connect the USB cable to the charging port on each light unit.
• Plug the other end of the USB cable into a power bank, laptop, wall adapter, or any device with a USB port.
• Ensure the lights are fully charged before use to maximize operating time. The working time can last approximately 4 hours of continuous flashing in a fully charged state.

Figure 6: USB charging setup for the turn signals.

Údržba

To ensure the longevity and optimal performance of your GOLDFOX Bike Tail Light with Turn Signal, follow these maintenance guidelines:

• Čištění: Otřete jednotky měkkým hadříkemamp hadříkem k odstranění nečistot a nečistot. Vyhněte se používání agresivních chemikálií nebo abrazivních materiálů.
• Voděodolnost: The units have an IP65 waterproof rating, making them suitable for use in rainy and foggy conditions. However, avoid submerging them in water for extended periods.
• Skladování: Store the lights in a cool, dry place when not in use. If storing for an extended period, ensure they are fully charged and recharge them periodically to maintain battery health.
• Péče o baterie: Do not overcharge or completely drain the batteries regularly. Follow recommended charging practices.

Figure 7: The IP65 waterproof design ensures functionality in various weather conditions.

Odstraňování problémů

If you encounter any issues with your GOLDFOX Bike Tail Light with Turn Signal, refer to the following common problems and solutions:

• Světla se nerozsvěcují: Ensure the units are charged. Press and hold the power button on each unit for 3 seconds to turn them on.
• Turn signals not responding to remote: Check if the remote control battery is functional. Re-pair the lights with the remote control following the pairing instructions in the Setup section.
• Lights not flashing correctly: Verify that the units are properly paired and that the selected mode is appropriate. If issues persist, try resetting the units by turning them off and on again.
• Krátká výdrž baterie: Ensure the units are fully charged. Avoid leaving them in Mode 2 (red and yellow flashing) when not actively riding, as this consumes more power. Switch to Mode 3 (off) for battery saving.

Specifikace

Záruka a podpora

Your GOLDFOX Bike Tail Light with Turn Signal comes with a 2-Year Manufacturer Warranty. This warranty covers defects in materials and workmanship under normal use.

For any questions, technical assistance, or warranty claims, please feel free to contact GOLDFOX customer support. Our mission is to provide you with quality products and excellent service.

Contact information can typically be found on the product packaging or the official GOLDFOX webmísto.

Široká kompatibilita

This wireless turn signal light system is suitable for various non-motorized vehicles, including bicycles and e-bikes. Its versatile design allows for installation in both front and rear positions, making it a recommended safety accessory for commuters and students.

Figure 8: The turn signals are compatible with various vehicles.