Maxxima 2-inch Ultra-Thin Recessed Anti-Glare LED Downlight

1. Bezpečnostní informace

Please read and understand all instructions completely before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• Riziko požáru: Supply conductors (power wiring) connecting to the fixture must be rated 90°C. If you are uncertain, consult a qualified electrician.
• Nebezpečí úrazu elektrickým proudem: Instalace sady LED Retrofit Kit vyžaduje znalost elektrických systémů svítidel. Pokud nemáte kvalifikaci, nepokoušejte se o instalaci. Kontaktujte kvalifikovaného elektrikáře.
• Install this kit only in luminaires that have the construction features and dimensions shown in the product documentation.
• To prevent wiring harness or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
• Tento lamp is not intended for use with emergency exit luminaires or emergency lights.
• Než se pokusíte o instalaci, ověřte si místní elektrotechnický předpis, protože stanoví standardy zapojení pro vaši oblast.
• The fixture is designed to be switched from a wall switch. Ensure the black power supply wire is connected to the switch. Do NOT connect the white supply wire to the switch.
• Do not leave bare wires or exposed outside the wire nut connectors.
• Během instalace sady nevytvářejte ani neupravujte žádné otevřené otvory v krytu kabeláže nebo elektrických součástí.
• This product is ETL Listed and operates at 120VAC.

2. Konec produktuview

The Maxxima 2-inch Ultra-Thin Recessed Anti-Glare LED Downlight is a canless, IC rated lighting fixture designed for various indoor applications. It features a round black trim and offers customizable lighting with 5 selectable color temperatures and dimming capabilities.

• Energeticky účinný: 9W LED, equivalent to 40W, consuming less power.
• Jas: 550 Lumens with anti-glare lighting and a 36° beam spread.
• Color Temperature Selectable (CCT): Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight).
• Stmívatelné: Compatible with most standard LED dimmers, offering a 20%-100% dimmable range.
• Vysoké CRI: 90 CRI rating for accurate color appearance.
• Odolná konstrukce: Features a durable cast aluminum body and deep recessed trim.
• Damp Hodnoceno: Vhodné pro použití v damp locations such as bathrooms and kitchens.

Figure 2.1: Maxxima 2-inch Ultra-Thin Recessed LED Downlight, Black

3. Seznam dílů

Před zahájením instalace se ujistěte, že jsou přítomny všechny komponenty:

• LED Downlight with spring clips
• Junction Box (with integrated CCT selection switch)
• Connector cable (pre-attached to downlight and junction box)
• Pěnové těsnění

Obrázek 3.1: Strana view of the Maxxima 2-inch Ultra-Thin Recessed LED Downlight, showing the heat sink and connector.

4. Nastavení a instalace

This downlight is designed for easy installation without the need for a traditional recessed can or housing.

1. Připravte otevření: Cut a hole in the ceiling drywall with a recommended diameter of 2.5 inches. Ensure there are no obstructions in the ceiling space.
2. Připojení kabeláže: Open the junction box. Connect the building's supply wires (typically black for live, white for neutral, and green/bare copper for ground) to the corresponding wires inside the junction box using appropriate wire connectors. Ensure all connections are secure and comply with local electrical codes.
3. Vyberte teplotu barev: Before closing the junction box, use the CCT selection switch located inside the junction box to choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
4. Umístění rozvodné krabice: Place the junction box into the ceiling beam or through the cutout hole into the ceiling cavity.
5. Připojení downlightu: Connect the downlight's cable to the junction box's cable using the provided quick connector. Ensure a firm connection.
6. Instalace downlightu: Gently push the spring clips on the sides of the downlight upwards. Insert the downlight into the cutout hole. The spring clips will automatically secure the fixture against the ceiling. Ensure the foam gasket creates a tight seal.

Obrázek 4.1: Rozměry produktu pro plánování instalace.

Figure 4.2: CCT selection switch inside the junction box.

5. Návod k obsluze

Once installed, operating your Maxxima LED downlight is straightforward.

5.1. Výběr teploty barev

The desired color temperature (CCT) must be selected using the switch inside the junction box před installation or by accessing the junction box after installation. The available options are 2700K, 3000K, 3500K, 4000K, and 5000K.

Figure 5.1: Visual comparison of selectable color temperatures.

5.2. Stmívání

This downlight is dimmable from 20% to 100% with most standard LED dimmers. Ensure your dimmer switch is compatible with LED fixtures for optimal performance and to prevent flickering.

Figure 5.2: Downlight installed in a ceiling, demonstrating illumination.

6. Údržba

The Maxxima LED downlight requires minimal maintenance.

• Čištění: To clean the fixture, ensure power is off. Wipe the surface with a soft, dry, or slightly damp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
• Žádné díly opravitelné uživatelem: LED světelný zdroj je integrovaný a nelze jej vyměnit. Nepokoušejte se svítidlo otevírat ani opravovat.

7. Řešení problémů

Pokud narazíte na problémy s vaším downlightem, podívejte se na následující běžné problémy a jejich řešení:

8. Specifikace

9. Záruka a podpora

This Maxxima LED downlight is covered by a 3-letá záruka od data nákupu.

For warranty claims, technical support, or any questions regarding your product, please contact Maxxima customer service. Refer to the product packaging or the official Maxxima webstránky s aktuálními kontaktními informacemi.

Uschovejte si prosím doklad o koupi pro účely záruky.