Příručky+

WORKPRO W125163AE

WORKPRO Buffer Polisher Instruction Manual

Model: W125163AE

Značka: WORKPRO

1. Úvod

Thank you for choosing the WORKPRO 6-inch 1080W Dual Action Random Orbital Polisher. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new polisher. Please read this manual thoroughly before first use and keep it for future reference. This tool is designed for various polishing and waxing applications, including car detailing, floor polishing, and metal polishing.

2. Bezpečnostní informace

Při používání elektrických spotřebičů vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění osob.

  • Používejte vhodné osobní ochranné prostředky, včetně ochranných brýlí a rukavic.
  • Ujistěte se, že pracovní prostor je čistý, dobře osvětlený a bez překážek.
  • Do not operate the polisher in damp nebo vlhké podmínky.
  • Při práci s nářadím držte děti a přihlížející mimo dosah.
  • Unplug the polisher from the power source before making any adjustments, changing accessories, or performing maintenance.
  • Do not force the tool; use the correct speed and pressure for the application.
  • Před každým použitím zkontrolujte napájecí kabel, zda není poškozený.

3. Obsah balení

Ověřte, zda jsou všechny níže uvedené položky součástí balení. Pokud některé položky chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

  • 1 × Polisher Machine
  • 1 × Auxiliary Handle
  • 1 × Backing Pad
  • 1 × Woolen Buffer Pad
  • 6 × Foam Pads (various types for different applications)
  • 2 × Replaceable Carbon Brushes
  • 1 × Hex Key
  • 3 × Hex Head Bolts
  • 1 × Towel
Image showing all components included in the WORKPRO Buffer Polisher kit: the polisher machine, backing pad, hex key, auxiliary handle, foam pads, woolen buffer pad, carbon brushes, hex head bolts, and a towel.

Obrázek 3.1: Zahrnuté součásti

4. Vlastnosti produktu

The WORKPRO Buffer Polisher is engineered for efficiency and user comfort.

  • 6 Variable Speed Control: Adjust speeds from 1400-5000 RPM to match project requirements, allowing for precise control during waxing and polishing.
    Detailní view of the WORKPRO polisher highlighting its parts including grip hood, auxiliary handle, speed adjustor, lock on button, carbon brush cover, backing pad, and on/off trigger.

    Figure 4.1: Polisher Components Overview

  • Vysoce výkonný motor: Vybaveno 9 amp, 1080 watt motor and 15mm dual action orbital motion for powerful and efficient operation. Heat-resistant copper wire ensures longer working time.
    Image illustrating the internal powerful 9A motor of the WORKPRO polisher, highlighting its 5000 RPM capability, low noise, and heavy-duty project suitability.

    Figure 4.2: High-Performance Motor

  • Ergonomický design: Features a comfortable grip hood and an auxiliary handle for non-slip control. The switch-locking mechanism reduces hand fatigue during extended use.
    Image illustrating the ergonomic design of the WORKPRO polisher, showing the comfortable grip and auxiliary handle for better control.

    Obrázek 4.3: Ergonomický design

  • Dual Action Orbital Motion: Provides high security and allows for polishing without glare, ensuring a smooth and even finish.
    Diagram illustrating the 15mm dual action orbital motion of the polisher, designed for high security and glare-free polishing.

    Figure 4.4: Dual Action Mechanism

5. Nastavení

  1. Připevnění pomocné rukojeti: Secure the auxiliary handle to the polisher using the provided hex head bolts and hex key. Ensure it is firmly tightened for safe operation.
  2. Install the Backing Pad: Align the backing pad with the spindle on the polisher and screw it on securely.
  3. Attach Polishing Pads: The foam pads and woolen buffer pad attach to the backing pad via hook-and-loop fasteners. Select the appropriate pad for your task (e.g., foam pads for compounding/polishing, woolen pad for buffing).
The WORKPRO Buffer Polisher with its auxiliary handle attached and a foam pad on the backing plate, ready for use.

Figure 5.1: Polisher Setup

6. Návod k obsluze

This section details the proper use of your WORKPRO Buffer Polisher for various applications.

  1. Zapnutí/vypnutí: Plug the polisher into a suitable power outlet. Press the On/Off trigger to start the tool.
  2. Using the Switch Locking Mechanism: For continuous operation, press the lock button located near the trigger after starting the polisher. This will keep the tool running without needing to hold the trigger. Press the trigger again to release the lock and stop the tool.
    Close-up image of the polisher's handle showing the trigger and the green lock button for continuous operation.

    Figure 6.1: Trigger and Lock Button

  3. Nastavení rychlosti: Use the 6-variable speed adjustor dial to select the desired RPM (1400-5000 RPM). Lower speeds are generally used for waxing and spreading compounds, while higher speeds are for polishing and buffing.
    Close-up image of the green speed dial on the WORKPRO polisher, showing the numerical settings for variable speed control.

    Figure 6.2: Speed Adjustor Dial

  4. Metody aplikace: The polisher can be used with either the auxiliary handle for two-handed control or by gripping the main body for single-handed operation, depending on the task and user preference.
    Image showing two different grip methods for the polisher: one with the auxiliary handle for two-handed control (Method 1) and another gripping the main body for single-handed use (Method 2).

    Figure 6.3: Multiple Control Methods

  5. Obecné použití: Apply a small amount of compound or wax directly to the pad or the surface. Start the polisher at a low speed to spread the product, then increase speed as needed for polishing or buffing. Maintain even pressure and move the polisher in overlapping passes.
    Collage of images demonstrating the wide range of applications for the WORKPRO polisher, including car waxing, wood polishing, tile polishing, and general car polishing.

    Obrázek 6.4: Široká škála aplikací

Video 6.1: WORKPRO Dual Action Buffer Polisher Kit in action, demonstrating variable speed control, switch locking mechanism, and various polishing applications on cars, tiles, and wood.

7. Údržba

Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon vaší leštičky.

  • Čištění: After each use, wipe down the polisher with a clean, dry cloth. Remove any residue from the backing pad and ensure ventilation slots are clear.
    Close-up image of the polisher's air vents, indicating the importance of keeping them clear for proper ventilation and cooling.

    Figure 7.1: Ventilation Slots

  • Výměna uhlíkových kartáčů: The carbon brushes are wear items and will need periodic replacement. When the tool's performance decreases or it stops working, check the carbon brushes. To replace, unscrew the carbon brush covers on the side of the motor housing, remove the old brushes, and insert new ones. Ensure the brushes are seated correctly before replacing the covers.
    Close-up image showing a hand using a screwdriver to open the carbon brush cover on the polisher, indicating the process for carbon brush replacement.

    Figure 7.2: Carbon Brush Replacement

  • Péče o vložky: Clean polishing pads thoroughly after each use to remove product residue. This prolongs their life and maintains polishing effectiveness.

8. Řešení problémů

ProblémMožná příčinaŘešení
Leštička se nespustí.No power supply; damaged cord; worn carbon brushes.Check power connection; inspect cord for damage; replace carbon brushes.
Reduced power or erratic operation.Worn carbon brushes; motor overheating; excessive pressure.Replace carbon brushes; allow tool to cool; reduce pressure.
Nadměrné vibrace nebo hluk.Loose backing pad; damaged pad; internal component issue.Tighten backing pad; replace damaged pad; contact customer support.
Špatné výsledky leštění.Incorrect pad type; insufficient product; improper technique.Use appropriate pad; apply sufficient product; review návod k obsluze.

9. Specifikace

AtributHodnota
Číslo modeluW125163AE
Zdroj napájeníElektrický kabel
svtage12 voltů
Ampvymazat9 Amps
Wattage1080 wattů
Rychlost15 000–18 000 ot./min (variabilní)
Hmotnost položky7.41 liber (3.37 kilogramů)
Rozměry balení16.97 x 7.6 x 6.69 palce
MateriálKov, Plast
BarvaŠedá, černá

10. Záruka a podpora

WORKPRO products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official WORKPRO webmísto.

For technical support, replacement parts, or any inquiries regarding your WORKPRO Buffer Polisher, please contact WORKPRO customer service. Contact information can typically be found on the product packaging or the official WORKPRO webmísto.

You can also visit the WORKPRO Store on Amazon for more information and products: WORKPRO Amazon Store.