1. Úvod
The UMLIFE STC-1000 is a versatile digital temperature controller designed for precise temperature management in various applications. This device features a clear LED display, NTC 10K thermistor sensor, and dual relay outputs for both heating and cooling control. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your temperature controller.
2. Konec produktuview
2.1 Klíčové vlastnosti
- Digital LED display for clear temperature readings.
- Wide temperature measurement and control range: -50°C to 99°C.
- High control accuracy of 0.1°C.
- Dual relay output for simultaneous heating and cooling control.
- Waterproof NTC 10K thermistor sensor for reliable measurements in various environments.
- Funkce kalibrace teploty.
- Delay start protection for cooling control.
- ABS flame-retardant shell for enhanced safety.
2.2 Součásti a displej
Familiarize yourself with the main components and display interface of the STC-1000 controller.
Obrázek 1: Front panel of the STC-1000 controller showing the digital display, power switch, UP button, Setting button, and DOWN button.
- Digitální zobrazovací okno: Shows current temperature and parameter settings.
- Vypínač: Zapíná nebo vypíná zařízení.
- Tlačítko NAHORU (▲): Zvyšuje hodnoty nebo prochází menu.
- Tlačítko DOLŮ (▼): Snižuje hodnoty nebo prochází menu.
- Setting Button (S): Vstupuje do režimu nastavení parametrů.
- Cool Indicator: Illuminates when cooling relay is active.
- Ukazatel tepla: Illuminates when heating relay is active.
Obrázek 2: Physical dimensions of the STC-1000 controller and the included 1-meter NTC 10K waterproof sensor probe.
3. Specifikace
| Parametr | Hodnota |
|---|---|
| Model | STC-1000 |
| Rozsah měření teploty | -50 °C až 99 °C |
| Rozsah regulace teploty | -50 °C až 110 °C |
| Přesnost měření | ±0.2 °C |
| Rezoluce | 0.1 °C |
| Přesnost ovládání | ±0.1 °C |
| Senzor | NTC 10K L=1M waterproof probe |
| Napájení | DC 12V |
| Spotřeba energie | <3W |
| Kapacita kontaktů relé | Cool (10A/220VAC), Heat (10A/220VAC) |
| Okolní teplota | 0 °C až 60 °C |
| Skladovací teplota | -30 °C až 75 °C |
| Relativní vlhkost | 20–84 % |
| Montážní velikost | Rozměr 71 mm x 29 mm |
| Rozměry produktu | 75 mm x 34.5 mm x 85 mm |
| Hmotnost položky | 7 unce (přibližně 198 g) |
| Materiál | Akrylonitrilbutadienstyren (ABS) |
4. Nastavení a instalace
Důležité bezpečnostní upozornění: Installation should be performed by qualified personnel. Ensure power is disconnected before wiring to prevent electric shock. Strictly distinguish between power supply, sensor, and relay interfaces. Maintain proper distance between sensor down-lead and power wires to avoid interference.
4.1 Schéma zapojení
Refer to the following diagram for correct wiring connections. This model operates on DC 12V power supply.
Obrázek 3: Wiring diagram for the STC-1000 12V temperature controller. Connections are for power supply, NTC sensor, heating relay, and cooling relay.
- Terminály 1 a 2: Power Supply (DC 12V).
- Terminály 3 a 4: NTC Sensor connection.
- Terminály 5 a 6: Heating Relay Output (Connect to heating device).
- Terminály 7 a 8: Cooling Relay Output (Connect to cooling device).
Ensure all connections are secure and insulated. Verify the power supply voltage matches the controller's requirement (DC 12V for this model).
4.2 Montáž
The STC-1000 is designed for panel mounting. Cut an opening of 71mm x 29mm in your panel. Insert the controller and secure it using the provided clips or mounting brackets.
5. Návod k obsluze
The STC-1000 operates in Celsius only. It cannot be switched to Fahrenheit.
5.1 Zapnutí/vypnutí
- Stiskněte tlačítko Vypínač napájení button (marked with ⏻) to turn the controller on or off.
5.2 Setting Temperature Parameters
The controller has two main temperature settings: the Set Temperature (ST) a Difference Temperature (DT), also known as hysteresis.
- Na view the Set Temperature (ST): Krátce stiskněte Setting (S) button. The display will show the current set temperature.
- To modify the Set Temperature (ST):
- Stiskněte a podržte Setting (S) tlačítko po dobu přibližně 3 sekund, dokud displej nezačne blikat.
- Použijte NAHORU (▲) or DOLŮ (▼) buttons to adjust the desired set temperature.
- Stiskněte tlačítko Vypínač napájení button to save the setting and exit, or wait for 10 seconds for it to save automatically.
5.3 Advanced Parameter Settings (F1-F4)
Přístup k pokročilým parametrům a jejich úprava:
- Stiskněte a podržte Setting (S) tlačítko po dobu přibližně 3 sekund, dokud displej nezačne blikat.
- While the display is flashing, press the Setting (S) button again (do not hold) to cycle through parameters F1, F2, F3, F4.
- Použijte NAHORU (▲) or DOLŮ (▼) tlačítky pro úpravu hodnoty vybraného parametru.
- Stiskněte tlačítko Vypínač napájení button to save the setting and exit, or wait for 10 seconds for it to save automatically.
| Parametr | Popis | Rozsah | Výchozí |
|---|---|---|---|
| F1 | Difference Temperature (Hysteresis): The difference between the set temperature and the temperature at which the relay switches off. | 0.3 °C až 10 °C | 2.0 °C |
| F2 | Highest Set Point Limit: Limits the maximum adjustable set temperature. | Set Temp to 110°C | 110 °C |
| F3 | Lowest Set Point Limit: Limits the minimum adjustable set temperature. | -50°C to Set Temp | -50 °C |
| F4 | Kalibrace teploty: Adjusts the temperature reading to match a known accurate thermometer. | -10 °C až 10 °C | 0.0 °C |
5.4 Heating and Cooling Modes
The STC-1000 automatically switches between heating and cooling based on the set temperature (ST) and difference temperature (DT).
- Režim chlazení: If the current temperature is higher than (ST + DT), the cooling relay activates. It deactivates when the temperature drops to ST.
- Režim topení: If the current temperature is lower than (ST - DT), the heating relay activates. It deactivates when the temperature rises to ST.
6. Údržba
- Čištění: Wipe the controller's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Péče o senzor: Ensure the NTC sensor probe is clean and free from debris. While waterproof, avoid unnecessary physical damage to the probe or cable.
- Spojení: Periodically check wiring connections for tightness and signs of corrosion.
- Prostředí: Operate the controller within the specified ambient temperature and humidity ranges to ensure optimal performance and lifespan.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Display shows "EE" | Sensor error or open circuit. | Zkontrolujte připojení senzoru. Vyměňte senzor, pokud je poškozený. |
| Display shows "HHH" | Temperature exceeds upper limit of measurement range. | Ensure the environment temperature is within the sensor's range (-50°C to 99°C). |
| Display shows "LLL" | Temperature falls below lower limit of measurement range. | Ensure the environment temperature is within the sensor's range (-50°C to 99°C). |
| Ovladač se nezapíná | Žádné napájení nebo nesprávná hlasitosttage. | Check power connections and ensure DC 12V is supplied. |
| Topení/chlazení se neaktivuje | Incorrect temperature settings (ST, DT), wiring error, or device malfunction. | Verify ST and DT settings. Check heating/cooling device wiring. Ensure the device is within operating parameters. |
8. Záruka a podpora
UMLIFE products are manufactured to high-quality standards. For warranty information or technical support, please contact UMLIFE customer service through your purchase platform or visit the official UMLIFE website. Please have your product model (STC-1000 12V) and purchase details ready when contacting support.
Pro další pomoc se můžete také obrátit na UMLIFE Store on Amazon.