Feit Electric LED Outdoor Security Flood Light (Model S9DFL/850/MOT/WH) User Manual

Zavedení

Thank you for choosing the Feit Electric LED Outdoor Security Flood Light. This fixture is designed to provide bright, energy-efficient illumination with advanced motion sensing and dusk-to-dawn capabilities for enhanced outdoor security and convenience. Please read this manual thoroughly before installation and operation to ensure proper function and safety.

Obrázek: Přední strana view of the Feit Electric LED Outdoor Security Flood Light, showing its dual adjustable heads and motion sensor.

Bezpečnostní informace

VAROVÁNÍ: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. Improper wiring can result in electric shock or fire.

• Všechna elektrická připojení musí být v souladu s místními normami a normami NEC (National Electrical Code).
• Pokud si nejste jisti postupy zapojení, poraďte se s kvalifikovaným elektrikářem.
• Do not install near combustible materials or in areas with explosive atmospheres.
• Ensure the fixture is securely mounted to a structural surface.
• This fixture is rated for outdoor wet locations (IP65).

Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• LED Outdoor Security Flood Light Fixture
• Montážní materiál (šrouby, matice)
• Těsnění
• Návod k použití

Image: The Feit Electric LED Outdoor Security Flood Light, showing the main unit and its components.

Specifikace

Image: A graphic detailing key specifications of the Feit Electric LED Outdoor Security Flood Light, including wattage, lumens, color temperature, and IP rating.

Pokyny k instalaci

1. Připravte se na instalaci

1. Vypnout napájení: Vyhledejte jistič nebo pojistkovou skříň a vypněte napájení rozvodné skříňky, kde bude svítidlo instalováno.
2. Vyčistěte oblast: Ensure the installation area is clear of obstructions and provides stable support for the fixture.

2. Montáž svítidla

The fixture is designed for wall mounting. Use the provided mounting plate for secure installation.

1. Attach the mounting plate to the junction box using the provided screws. Ensure the plate is flush and secure.
2. Protáhněte elektrické vodiče z rozvodné krabice středovým otvorem v montážní desce.
3. Position the fixture against the mounting plate, ensuring the gasket is properly seated to prevent water intrusion.

Image: Illustration of the mounting back plate and screws, demonstrating the hands-free wiring design for easier installation.

3. Připojení vodičů

Connect the fixture wires to the household wiring using the provided wire nuts:

• Připojte černý vodič od svítidla k černý (live) wire from the junction box.
• Připojte bílý vodič od svítidla k bílý (nulový) vodič ze spojovací krabice.
• Připojte zelený (uzemňovací) vodič od svítidla k zelený or bare copper (ground) wire from the junction box.
• Ujistěte se, že všechna připojení jsou bezpečná a izolovaná pomocí matic.

4. Secure the Fixture

Once wiring is complete, align the fixture with the mounting plate and secure it using the provided screws. Ensure a tight seal to maintain the IP65 waterproof rating.

Obrázek: Boční view of the flood light, illustrating the adjustable light heads and motion sensor for optimal positioning.

Návod k obsluze

1. Power On and Initial Test

After installation, restore power at the circuit breaker. The light may cycle on and off briefly as it calibrates.

2. Funkce pohybového senzoru

The integrated motion sensor detects movement within a 180° wide sensing angle and up to 50 feet away. When motion is detected, the light will turn on automatically. The duration the light stays on after motion ceases is typically adjustable (refer to specific model controls if available, usually a dial on the sensor itself).

Image: Diagram illustrating the wide-beam optics and motion sensor detection range, showing coverage up to 50 feet.

3. Funkce od soumraku do úsvitu

The built-in light sensor automatically detects ambient light levels. The fixture will activate at dusk and deactivate at dawn, ensuring illumination only when needed. This feature works in conjunction with the motion sensor, meaning the motion sensor will only be active during nighttime hours.

Image: Visual representation of the dusk-to-dawn sensor, showing the light activating as ambient light decreases and deactivating as it increases.

4. Adjusting Light Heads and Sensor

The two LED light heads and the motion sensor are adjustable. Carefully pivot them to direct light and motion detection to your desired areas. Do not overtighten adjustment screws.

Údržba

• Čištění: Před čištěním se ujistěte, že je zařízení vypnuté. Otřete svítidlo měkkým hadříkem.amp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit povrchovou úpravu nebo elektrické součástky.
• Inspekce: Periodically inspect the fixture for any signs of damage, loose wiring, or wear.
• LED diody: The integrated LEDs are designed for long life and are not user-replaceable.

Image: The Feit Electric flood light shown in a rainy environment, emphasizing its IP65 wet-rated and weather-resistant construction.

Odstraňování problémů

Záruka

This Feit Electric product is warranted to be free from defects in workmanship and materials for 5 roky from the date of purchase. If the product fails within the warranty period, please contact Feit Electric for replacement or refund. This warranty expressly excludes incidental and consequential damages.

Podpora

For technical assistance or further inquiries, please visit the official Feit Electric website or contact their customer support. Refer to the product packaging or the Feit Electric webstránky s nejaktuálnějšími kontaktními informacemi.

Feit Electric Webmísto: www.feit.com