KEELIXIN 65.6ft LED Lights User Manual

Zavedení

Thank you for choosing KEELIXIN LED Strip Lights. This user manual provides essential information for the safe and effective operation of your new LED lights. These color-changing LED strip lights feature high-quality 5050 RGB chips, offering 16 million colors and 22 dynamic modes. They are designed to enhance the atmosphere of various indoor spaces such as bedrooms, kitchens, and ceilings, allowing you to enjoy a vibrant and colorful environment at any time.

The lights can be controlled via a smart application (APP) or the included IR remote control, providing versatile customization options for color, brightness, and lighting modes. Additionally, a built-in microphone enables the lights to sync with music, creating an immersive audio-visual experience.

Image: The KEELIXIN 65.6ft LED Lights product packaging, showcasing the coiled LED strip, remote control, and smartphone app interface.

Bezpečnostní informace

Před instalací a použitím si pečlivě přečtěte všechny bezpečnostní pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo jiným zraněním.

• Tento produkt je určen pro pouze pro vnitřní použitíNevystavujte vodě ani vlhkosti.
• Ensure the power adapter is connected to a suitable power outlet (24V).
• Do not cover the LED strip lights or power adapter with any materials that may prevent heat dissipation.
• Uchovávejte mimo dosah dětí.
• Do not attempt to repair or modify the product. Refer all servicing to qualified personnel.
• If cutting the LED strip, ensure the power is disconnected. Note that connectors are required after cutting and are not included with the product.
• The remote control contains a CR2032 button cell battery. Keep batteries out of reach of children. Swallowing may lead to serious injury or death.

Image: The product box displaying a warning label regarding the button cell battery included in the remote control.

Obsah balení

Po otevření zkontrolujte obsah balení, abyste se ujistili, že jsou všechny položky přítomny a nepoškozené:

• 1 x 65.6ft LED Strip Lights
• 1 x IR dálkové ovládání
• 1 x 24V napájecí adaptér
• Řídicí jednotka 1 x
• 1 x Uživatelská příručka (tento dokument)

Nastavení a instalace

Follow these steps to properly set up your KEELIXIN LED Strip Lights:

1. Vyčistěte povrch: Before attaching the LED strip, ensure the surface is clean, dry, and smooth. Dust, dirt, or moisture can affect the adhesive.
2. Naplánujte si rozvržení: Unroll the LED strip and plan where you want to install it. Avoid sharp bends or folds that could damage the strip.
3. Připojte komponenty:
   • Connect the LED strip to the controller. Ensure the arrows on the strip and controller connector align.
   • Connect the IR signal receiver cable from the controller.
   • Connect the 24V power adapter to the controller.
4. Namontujte pásku: Peel off the adhesive backing from the LED strip and carefully press it onto the desired surface. Apply firm, even pressure along the entire length.
5. Position the IR Receiver: Ensure the IR signal receiver is exposed and not obstructed, so the remote control can effectively communicate with the lights.
6. Připojit: Once all connections are secure and the strip is mounted, plug the 24V power adapter into a wall outlet.

Image: An illustration detailing the connection process for the LED strip lights, including the power adapter, IR controller, IR signal receiver, and remote control.

Important Note on Cutting: The LED strip can be cut at designated marks (usually indicated by a scissor icon or copper pads) to fit your specific length requirements. However, cutting the strip will require additional connectors (not included) to re-establish electrical contact for any separated sections you wish to use.

Návod k obsluze

Your KEELIXIN LED Strip Lights offer dual control modes: via the included IR Remote Control and a smart Bluetooth APP.

1. Using the IR Remote Control

Point the IR remote directly at the IR signal receiver connected to the controller. Ensure there are no obstructions between the remote and the receiver.

• Zapnutí/vypnutí: Stiskněte tlačítko ON/OFF tlačítko.
• Výběr barvy: Choose from 16 preset colors using the color buttons.
• Nastavení jasu: Použijte Jas nahoru a Snížení jasu tlačítka pro nastavení intenzity světla.
• Dynamické režimy: Select from 22 dynamic modes (e.g., Flash, Strobe, Fade, Smooth) using the dedicated mode buttons.
• Barvy pro kutily: Some remotes allow for custom color mixing by pressing DIY buttons and then adjusting RGB values.

2. Using the Bluetooth APP Control

For advanced features and greater control, download the dedicated Bluetooth APP. The APP name is typically found on the controller or in the included user manual. You can also scan the QR code on the controller or packaging to download the app. A common app for these types of lights is "HappyLighting" or similar.

Kroky k připojení:

1. Download and install the APP on your smartphone (iOS or Android).
2. Ujistěte se, že je na vašem smartphonu povoleno Bluetooth.
3. Zapněte LED pásek.
4. Open the APP. It should automatically detect and connect to the LED lights. If not, refresh the device list within the app.

Funkce aplikace:

• 16 milionů barev: Access a full spectrum of colors for precise customization.
• 22 dynamických režimů: Choose from a wider range of pre-programmed lighting effects.
• Barvy pro kutily: Create and save your own unique color combinations.
• Ovládání jasu a sytosti: Fine-tune the intensity and vibrancy of colors.
• Režim synchronizace hudby: The built-in microphone allows the lights to change color and rhythm with music playing in the room or through your phone's microphone.
• Funkce časování: Nastavte si časové plány pro automatické zapínání/vypínání světel.
• Scénické režimy: Pre-set scenes for different moods or occasions.

Image: A visual representation of the dual control options: Bluetooth APP on a smartphone and the physical IR remote control.

Image: Depiction of the music sync feature, showing two individuals dancing in a vibrant, music-filled environment, with the lights changing in rhythm.

For more detailed APP instructions, please refer to the APP's in-app guide or visit the official support page: http://www.easytrack.net.cn/download/116CHUANZHIGUANG

Údržba

Proper maintenance ensures the longevity and optimal performance of your LED strip lights:

• Čištění: LED pásek jemně otřete suchým, měkkým hadříkem, abyste odstranili prach. Nepoužívejte tekuté čisticí prostředky ani abrazivní materiály.
• Odpojení napájení: Před čištěním nebo prováděním jakékoli údržby vždy odpojte napájecí adaptér.
• Kontrola lepidla: Periodically check the adhesive backing to ensure the strip remains securely attached. Re-secure if necessary.
• Skladování: Pokud světla skladujete delší dobu, volně je smotejte a uchovávejte na suchém a chladném místě mimo dosah přímého slunečního záření.
• Výměna baterie (dálkový ovladač): If the remote control's range decreases or it stops responding, replace the CR2032 button cell battery. Ensure correct polarity.

Odstraňování problémů

If you encounter issues with your KEELIXIN LED Strip Lights, try the following solutions:

Specifikace

Detailed technical specifications for the KEELIXIN 65.6ft LED Lights:

Image: The back of the product box, detailing product parameters such as input/output voltage a pracovní teplota.

Záruka a podpora

KEELIXIN products are manufactured with high-quality standards. For any product-related inquiries, technical support, or warranty claims, please contact KEELIXIN customer service through the platform where you purchased the product. Please retain your proof of purchase for warranty purposes.

For the most up-to-date information and support, please visit the official KEELIXIN store on Amazon: KEELIXIN Amazon Store.