Beghelli 86152 Floodlight FL Outdoor Projector User Manual

1. Úvod

Thank you for choosing the Beghelli 86152 Floodlight FL Outdoor Projector. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED floodlight. Please read these instructions carefully before installation and retain them for future reference.

Image 1: Beghelli 86152 Floodlight FL Outdoor Projector. This image shows the front view of the white LED floodlight with its integrated mounting bracket.

2. Bezpečnostní informace

Vždy dodržujte následující bezpečnostní opatření, abyste předešli zranění nebo poškození produktu:

• Elektrická instalace: Instalaci musí provést kvalifikovaný elektrikář v souladu se všemi místními a národními elektrotechnickými předpisy.
• Odpojení napájení: Ensure the main power supply is disconnected before any installation, maintenance, or cleaning.
• svtage: This product operates on 220-240 VAC, 50/60 Hz. Verify your power supply matches these requirements.
• Základy: Reflektor musí být řádně uzemněn, aby se zabránilo úrazu elektrickým proudem.
• Venkovní použití: The product is rated IP66 for outdoor use, providing protection against dust and powerful water jets. However, do not submerge the unit.
• Teplota: Do not operate the floodlight outside the specified ambient temperature range of -20°C to +40°C.
• Světelný zdroj: Nedívejte se přímo do LED světelného zdroje, když je rozsvícený, mohlo by dojít k poškození očí.
• Modifikace: Do not attempt to modify or repair the floodlight. Refer all servicing to qualified personnel.

3. Obsah balení

Zkontrolujte prosím balení, zda neobsahuje následující položky:

• Beghelli 86152 Floodlight FL Outdoor Projector (1 unit)
• Montážní konzola (předmontovaná)
• Návod k použití (tento dokument)
• Note: Mounting hardware (screws, anchors) may not be included and should be selected based on the installation surface.

4. Nastavení a instalace

Follow these steps for proper installation of your Beghelli Floodlight FL:

1. Vyberte umístění: Select a suitable outdoor location for mounting. The floodlight can be installed on a wall or ground. Ensure the surface is sturdy enough to support the weight of the fixture (approximately 1 kg).
2. Odpojení napájení: Před zahájením jakýchkoli elektrických prací se ujistěte, že je hlavní přívod proudu do prostoru instalace vypnut jističem.
3. Montáž:
   • Use the pre-attached mounting bracket as a template to mark drilling points on the desired surface.
   • Drill appropriate holes and insert suitable anchors (if required for your surface type).
   • Secure the mounting bracket firmly to the surface using appropriate screws.
   • Adjust the angle of the floodlight as needed using the bracket's pivot points, then tighten securely.
4. Elektrické připojení:
   • Route the electrical cable to the floodlight's connection point. Ensure the cable is suitable for outdoor use and protected from damage.
   • Connect the live (brown/black), neutral (blue), and earth (green/yellow) wires from your power supply to the corresponding terminals on the floodlight. Ensure all connections are secure and properly insulated.
   • Verify all wiring is correct and secure before proceeding.
5. Závěrečná kontrola: Double-check all connections and mounting security. Ensure no wires are exposed or pinched.

Image 2: Beghelli 86152 Floodlight FL Side View. This image provides a side perspective of the floodlight, highlighting its slim profile and the adjustable mounting bracket.

5. Návod k obsluze

Once installed correctly, operating the Beghelli Floodlight FL is straightforward:

1. Obnovit napájení: After ensuring all installation steps are complete and safe, restore power to the circuit at the main breaker.
2. Zapnout: Use the external wall switch or control system connected to the floodlight to turn it on. The LED light will illuminate instantly.
3. Vypnout: Turn off the floodlight using the same external switch or control system.

This floodlight is designed for direct connection to a power source and does not feature integrated user controls like dimmers or color temperature adjustments.

6. Údržba

The Beghelli Floodlight FL is designed for minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:

• Čištění: Pravidelně čistěte povrch reflektoru a skleněný kryt měkkým hadříkem.amp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or seals. Ensure power is disconnected before cleaning.
• Inspekce: Regularly inspect the floodlight for any signs of damage, loose connections, or wear on the cable. Address any issues promptly.
• Žádné díly opravitelné uživatelem: The LED light source is integrated and not user-replaceable. Do not attempt to open the fixture, as this will void the warranty and may compromise its IP66 rating.

7. Řešení problémů

Pokud narazíte na problémy s reflektorem, podívejte se na následující běžné problémy a jejich řešení:

If the problem persists after attempting these solutions, please contact Beghelli customer support or a qualified electrician.

8. Technické specifikace

9. Záruka a podpora

Beghelli products are manufactured to high-quality standards and are covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Beghelli webpodrobné záruční podmínky naleznete na webu.

For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or Beghelli customer service directly. Ensure you have your product model number (86152 Floodlight FL or 60047) and proof of purchase available when contacting support.

Beghelli Official Webmísto: www.beghelli.it