DORTALA Wicker Patio Bistro Set 3 Piece Instruction Manual

Důležité bezpečnostní informace

Před montáží a použitím tohoto výrobku si prosím přečtěte a pochopte všechny pokyny. Nedodržení těchto pokynů může vést ke zranění nebo poškození majetku.

• Follow all instructions provided for assembly and use to ensure safety.
• Check the product for any damage or defects upon receipt. Do not assemble or use if damaged.
• Ensure stability and secure placement of the furniture to avoid tip-over risks.
• Udržujte děti a domácí zvířata mimo oblast montáže.
• Do not overtighten screws during assembly, as this may damage the components. Tighten all screws only after all parts are aligned.

Obsah balení

Před zahájením montáže ověřte, zda jsou všechny komponenty přítomny:

• 1x Jídelní stůl
• 2 x Jednolůžková židle
• 2 x Polštář
• 1 x Návod k obsluze (tento dokument)
• Sada hardwaru (šrouby, podložky, imbusový klíč)

Montážní návod

Please do not tighten screws before all the screw holes are lined up. Refer to the assembly video for visual guidance.

Chair Assembly (x2)

1. Identify chair components: Parts A, B, C, D, E.
2. Connect part E (backrest) with part D (seat base) using Bolt 1. Ensure holes align before partially tightening.
3. Connect part B (side panel) with part D (seat base) using Bolt 1.
4. Connect part A (front panel) with part D (seat base) using Bolt 2.
5. Connect part B (side panel) with part A (front panel) using Bolt 1.
6. Connect part E (backrest) with part C (other side panel) using Bolt 1.
7. Connect part A (front panel) with part C (other side panel) using Bolt 2.
8. Once all parts are loosely connected and aligned, fully tighten all bolts using the provided Allen wrench.
9. Adjust the chair if it is uneven after assembly.

Image showing the dimensions of the chair and table, indicating a chair capacity of 350 lbs and table capacity of 110 lbs.

Sestava stolu

1. Identify table components: Parts F, G, H, I.
2. Connect part F (table base) with part G (table side panel) using Bolt 1.
3. Attach part H (support bar) to connect part F and part G using Bolt 3.
4. Opakujte pro druhý boční panel.
5. Place the tempered glass tabletop (Part I) onto the assembled table frame. Ensure it sits securely and use the provided suction cups to fix it in place.

Image detailing the premium tempered glass tabletop and the suction cup mechanism for secure attachment.

Návod k obsluze

The DORTALA Wicker Patio Bistro Set is designed for outdoor use, providing comfortable seating and a convenient surface for dining or relaxation.

• Umístění: Position the bistro set on a flat, stable surface in your desired outdoor area (balcony, porch, backyard, deck, poolside, terrace).
• sezení: Place the cushions on the chairs for enhanced comfort. The curved backrest and ergonomic armrests are designed to support your body.
• Použití stolu: Use the tempered glass table for placing food, drinks, or decorative items. Ensure items are placed centrally to maintain balance.
• Prostorově úsporné úložiště: When not in use, the two chairs can be tucked underneath the dining table to minimize floor space.

Image demonstrating the space-saving design where chairs can be stored under the table.

Údržba

Proper care will extend the life and appearance of your patio bistro set.

• Cleaning Wicker: Wipe the PE rattan surfaces with a damp hadříkem. Na odolnou špínu použijte jemný mýdlový roztok a důkladně opláchněte. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky.
• Péče o polštář: The zippered cushions feature removable and washable covers for easy daily cleaning. Hand wash or machine wash on a gentle cycle with cold water. Air dry only. Do not bleach or iron. Store cushions indoors during inclement weather or prolonged periods of non-use to prevent fading and wear.
• Skleněná deska stolu: Desku stolu z tvrzeného skla očistěte čističem skla a měkkým hadříkem.
• Údržba rámu: Pravidelně kontrolujte všechny šrouby a spoje, zda jsou pevně utažené. V případě potřeby je dotáhněte.
• Ochrana proti počasí: While the PE rattan is weather-resistant, covering the set during heavy rain, snow, or extreme temperatures is recommended to prolong its lifespan.

Image showing the soft touch of the cushion and the removable, washable cover with a zipper.

Odstraňování problémů

Běžné problémy a jejich řešení:

• Uneven Chair/Table: If the furniture wobbles after assembly, loosen all bolts slightly, place the item on a flat surface, apply gentle pressure to level it, then retighten all bolts.
• Difficulty Aligning Screw Holes: Ensure all parts are correctly oriented according to the instructions. Do not fully tighten any screws until all components are loosely assembled and aligned.
• Uvolněná připojení: Periodically check and tighten all bolts to maintain stability and safety.
• Posuvné polštáře: If cushions slide, consider adding non-slip pads underneath them.

Specifikace

Image highlighting key construction features: weather-resistant PE rattan, stable steel support, and anti-slip foot pads for enhanced stability.

Záruka

DORTALA products are manufactured with quality and durability in mind. For specific warranty details, please refer to the product packaging or contact DORTALA customer support. Keep your proof of purchase for any warranty claims.

Podpora

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact DORTALA customer support. Contact information can typically be found on the product packaging or the official DORTALA webmísto.

You may also visit the DORTALA store on Amazon for more information: DORTALA Store