SoloGood HEE Wing T-01 Fixed Wing RC Plane User Manual

1. Úvod

This manual provides essential information for the safe assembly, setup, operation, and maintenance of your SoloGood HEE Wing T-01 Fixed Wing RC Plane. Please read this manual thoroughly before operating the aircraft to ensure proper function and to prevent damage or injury. The HEE Wing T-01 is a 730mm wingspan fixed-wing RC airplane constructed from EPP foam, designed for stable flight characteristics.

2. Bezpečnostní opatření

• Always fly in open areas: Avoid flying near people, buildings, power lines, or other obstacles.
• Povětrnostní podmínky: Do not fly in strong winds, rain, or other adverse weather conditions. The lightweight EPP foam construction is susceptible to wind.
• Bezpečnost baterie: Use only recommended batteries (2S ~ 3S 1300mah~5000mah LiPo). Ensure proper charging and handling to prevent fire or explosion.
• Bezpečnost vrtule: Keep hands and loose clothing away from the propeller when the aircraft is powered on.
• Dohled dospělé osoby: This product is recommended for users aged 10 months and up, but adult supervision is advised, especially for beginners.
• Předletová kontrola: Always perform a thorough pre-flight check of all components, controls, and battery levels before each flight.

3. Obsah balení

The PNP (Plug-N-Play) package includes the following components:

• EPP foam parts (main fuselage, wings, tail)
• Plastové konstrukční díly
• Accessories pack (Strap and Sticker)
• Quick release structure components
• Quick remove plug
• Wire plug package
• RGB lamp
• UBEC- 5V/2A
• FX-3830 Propeller
• FX-1404-3700KV Brushless motor
• FX-20A Brushless ESC (without UBEC)
• FX-5g Digital Servo

Note: Battery, charger, transmitter, and receiver are not included in the PNP package and must be purchased separately.

Obrázek: Overview of the HEE Wing T-01 RC Plane and its included components.

4. Montážní návod

The HEE Wing T-01 features a quick-release design for easy assembly and disassembly.

1. Upevnění křídla: Carefully slide the main wings onto the fuselage. Ensure they are securely seated and the quick-release mechanisms (if applicable) are engaged.
2. Ocasní část: Attach the tail section, ensuring all control linkages are correctly connected to the servos.
3. Instalace vrtule: Install the FX-3830 propeller onto the FX-1404-3700KV brushless motor. Ensure it is tightened securely but not overtightened.
4. Landing Gear (Optional): If using the optional landing gear, attach it to the designated points on the fuselage.

Obrázek: Přední strana view of the HEE Wing T-01 RC Plane, showing the optional landing gear installed.

5. Nastavení a předletové kontroly

1. Instalace baterie: Open the cabin hatch. Insert the recommended 2S ~ 3S 1300mah~5000mah LiPo battery into the cabin space (245mm x 51mm x 48mm). Secure the battery to prevent shifting during flight.


Obraz: View of the HEE Wing T-01 RC Plane's cabin, showing the spacious layout for battery and electronics.

2. Vysílač a přijímač: Connect your compatible receiver (not included) to the flight controller. Power on your transmitter (not included) and then the aircraft. Follow your transmitter's instructions to bind it with the receiver.
3. Kontrola řídicí plochy: Verify that all control surfaces (ailerons, elevator, rudder) respond correctly to transmitter inputs. Ensure they move freely and in the correct direction.
4. Těžiště (CG): Adjust the battery position to achieve the recommended Center of Gravity. Proper CG is crucial for stable flight.

6. Návod k obsluze

The HEE Wing T-01 is designed for easy control, suitable for beginners, but requires practice for optimal performance.

6.1 Take-off

• Ruční spuštění: Hold the aircraft firmly with one hand, apply full throttle, and gently toss it forward into the wind.
• Vzlet ze země: If using landing gear, place the aircraft on a smooth, flat surface. Apply full throttle and steer with the rudder until it gains sufficient speed for lift-off.

6.2 Řízení letu

Use your transmitter to control the aircraft:

• Škrticí klapka: Řídí rychlost motoru a nadmořskou výšku.
• Výtah: Ovládá sklon (nos nahoru/dolů) pro stoupání a klesání.
• Křidélka: Controls roll (wing tilt) for turning.
• Kormidlo: Controls yaw (nose left/right) for coordinated turns.

6.3 Přistání

Approach the landing area into the wind. Gradually reduce throttle and maintain a gentle descent using the elevator. Aim for a smooth, level touchdown.

7. Údržba

• EPP Foam Care: The EPP foam is durable but can be damaged. Inspect for cracks or dents after each flight. Minor damage can often be repaired with foam-safe glue.
• Motor and Propeller: Check the motor for debris and ensure the propeller is free from damage and securely attached. Replace damaged propellers immediately.
• Servos and Linkages: Ensure all servos operate smoothly and linkages are free from bends or obstructions.
• Skladování baterie: Skladujte LiPo baterie při skladovacím objemutage (around 3.8V per cell) in a fire-safe bag when not in use.

8. Řešení problémů

• Letadlo nereaguje: Check battery connections on both aircraft and transmitter. Ensure transmitter and receiver are properly bound.
• Nestabilní let: Verify Center of Gravity (CG) is correct. Check for bent control surfaces or damaged linkages. Avoid flying in windy conditions.
• Motor se netočí: Check battery charge, motor connections, and ESC. Ensure throttle is armed (usually by moving throttle stick to full then zero).
• Krátká doba letu: Ensure battery is fully charged. Check for excessive drag or motor issues.

9. Specifikace

Image: Diagram illustrating the dimensions of the HEE Wing T-01 RC Plane.

Obrázek: Boční view of the HEE Wing T-01 RC Plane, highlighting its dynamic and static capabilities, including minimum and maximum flight speeds.

10. Záruka a podpora

For warranty information, technical support, or replacement parts, please refer to the manufacturer's official webnebo se obraťte na prodejce, u kterého jste produkt zakoupili. Uschovejte si doklad o koupi pro případ reklamace.