PERLESMITH PSMFK7, PSMFK1

PERLESMITH Návod k obsluze nástěnného držáku na TV s plným pohybem

Models: PSMFK7, PSMFK1

Důležité bezpečnostní informace

Please read these instructions carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer. The manufacturer is not liable for damage or injury caused by incorrect assembly or use.

  • Nosnost: Do not exceed the maximum weight capacity specified for your model. Overloading can result in serious injury or property damage.
  • Konstrukce stěny: The wall mount must be securely attached to a suitable wall structure. Do not install on drywall alone. Ensure the mounting surface can safely support the combined weight of the mount and the television.
  • Kompatibilita VESA: Verify your TV's VESA mounting pattern (hole spacing) is compatible with this mount.
  • Děti: Udržujte děti mimo dosah místa instalace. Malé části mohou představovat nebezpečí udušení.
  • Nástroje: Pro instalaci použijte vhodné nástroje.

Kompatibilita produktu

This instruction manual covers two models of PERLESMITH Full Motion TV Wall Mounts, PSMFK7 and PSMFK1. Please identify your model and confirm your television's specifications before proceeding with installation.

Model PSMFK7

  • Kompatibilita velikosti obrazovky: Většina televizorů s úhlopříčkou 26–55 palců.
  • Nosnost: Až 70 liber (31.7 kg).
  • Vzory VESA: 100x100mm to 400x400mm.
Image showing PSMFK7 compatibility for 26-55 inch TVs, 70 lbs weight capacity, and VESA patterns from 100x100mm to 400x400mm.

Figure 1: PSMFK7 Model Compatibility Overview. This image illustrates the supported screen sizes (26-55 inches), maximum weight capacity (70 lbs), and VESA mounting patterns (100x100mm to 400x400mm) for the PSMFK7 TV wall mount.

Model PSMFK1

  • Kompatibilita velikosti obrazovky: Většina televizorů s úhlopříčkou 26–60 palců.
  • Nosnost: Až 77 liber (35 kg).
  • Vzory VESA: Up to 400x400mm (16x16 inches).
Image showing PSMFK1 compatibility for up to 60 inch TVs, and VESA patterns including 400x400mm, 400x300mm, 400x200mm, 300x300mm, 300x200mm, 200x400mm, 200x300mm, 200x200mm, 200x100mm, 100x200mm, 100x100mm, 75x75mm. Also shows compatible wall types: single stud, brick wall, concrete wall.

Figure 2: PSMFK1 Model Compatibility and Wall Types. This image details the wide compatibility of the PSMFK1 model, supporting TVs up to 60 inches and various VESA patterns. It also indicates suitability for single wood stud, brick, and concrete walls.

Potvrďte před nákupem

Před nákupemasing or installing, ensure your TV meets the following criteria:

  • Hmotnost televizoru: Your TV's weight is within the mount's capacity (70 lbs for PSMFK7, 77 lbs for PSMFK1).
  • Velikost televizoru: Your TV's screen size is within the recommended range (26-55" for PSMFK7, 26-60" for PSMFK1).
  • Vzor VESA: Your TV's VESA mounting holes match one of the supported patterns.
  • Typ stěny: Your wall is suitable for installation (single wood stud, concrete, or brick).
  • Cable Blockage: Ensure the mounting holes on your TV do not block any cables or inputs.
Image summarizing pre-purchase checks: TV weight, TV size, VESA pattern, wall type compatibility (single wood stud, concrete, brick wall), and potential cable blockage on the TV back.

Figure 3: Pre-Purchase Confirmation Checklist. This image provides a visual summary of essential checks to perform before installing the TV mount, including TV weight, size, VESA, wall type, and potential cable interference.

Co je zahrnuto

Carefully unpack the box and ensure all parts are present and undamaged. If any parts are missing or damaged, do not attempt to install. Contact customer service for assistance.

Image of the PERLESMITH full motion TV wall mount, including the wall plate, articulating arm, TV bracket, a small bubble level, and three cable ties.

Figure 4: Package Contents. This image displays the main components of the PERLESMITH full motion TV wall mount kit, including the mount assembly, a bubble level for installation, and cable ties for cable management.

Typický obsah balení:

  • Full Motion TV Wall Mount Assembly
  • Držáky na televizory (2x)
  • Sada montážního hardwaru (různé šrouby, podložky, distanční podložky, hmoždinky)
  • Úroveň bublin
  • Kabelové svazky (x3)
  • Návod k použití

Nastavení a instalace

Správná instalace je zásadní pro bezpečnost a stabilitu vašeho televizoru. Pečlivě dodržujte tyto kroky.

Než začnete

  • Gather all necessary tools (e.g., drill, stud finder, level, screwdriver, tape measure).
  • Ensure you have a clear, safe workspace.
  • Confirm your TV and wall meet the compatibility requirements.

Wall Type Considerations

Tento držák je určen k instalaci na:

  • Single Wood Stud: Locate the center of the wood stud using a stud finder.
  • Solid Concrete Wall: Requires a masonry drill bit and concrete anchors.
  • Cihlová zeď: Requires a masonry drill bit and brick anchors.

VAROVÁNÍ: Do not install this TV mount on drywall alone. Drywall cannot support the weight of the mount and TV.

Obecné kroky instalace

  1. Připevnění držáků televizoru k televizoru: Secure the vertical TV brackets to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and level.
  2. Determine Wall Plate Position: Držte nástěnnou desku u zdi v požadovaném viewing height. Use the included bubble level to ensure it is perfectly horizontal. Mark the drilling locations.
  3. Vrtací pilotní otvory: Drill pilot holes at the marked locations. For wood studs, drill directly. For concrete or brick, use a masonry bit and insert concrete/brick anchors.
  4. Bezpečná nástěnná deska: Připevněte nástěnnou desku ke zdi pomocí šroubů s drážkou a podložek. Pevně ​​utáhněte, ale nepřetahujte.
  5. Zavěšení televize na nástěnnou desku: Carefully lift the TV (with brackets attached) and hook the brackets onto the wall plate. Ensure the TV is securely seated.
  6. Zajištění televizoru k upevnění: Use the safety screws or locking mechanisms on the TV brackets to secure the TV to the wall mount, preventing accidental dislodgement.
Image showing a TV wall mounted above a fireplace, illustrating how to perfectly center the TV on the wall.

Figure 5: Centering Your TV. This image demonstrates a TV mounted centrally on a wall, providing a visual guide for optimal placement above a feature like a fireplace.

Image showing a TV wall mounted in a corner, demonstrating the full motion capability for corner installations.

Figure 6: Corner Mounting Example. This image illustrates how the full motion design allows for effective TV placement in a room corner, maximizing viewing úhly.

Provozní úpravy

Plně pohyblivá konstrukce umožňuje flexibilní viewing angles. Adjustments can be made after installation.

  • Náklon: The TV can be tilted +5° upwards to -15° downwards to reduce glare or optimize viewing from different heights. Loosen the tilt knobs on the TV brackets, adjust to the desired angle, and re-tighten.
  • Otočný: The articulating arm allows the TV to swivel up to +/-90° (180° total range) left or right, depending on TV size and wall distance. Gently push or pull the TV to the desired angle.
  • Prodloužení/zatažení: The mount can extend the TV up to 19.17 inches (48.7 cm) from the wall for optimal viewing or retract it back to 3.2 inches (8.1 cm) for a low-profile Podívejte.
  • Vyrovnání: After installation, the TV can be leveled +/-3° to correct any minor misalignments. Loosen the leveling screws, adjust, and re-tighten.
Image illustrating the full motion capabilities: Tilt down 15 degrees, Extend 19.17 inches, Swivel 180 degrees, and Leveling plus or minus 3 degrees.

Figure 7: Full Motion Adjustments. This image visually explains the tilt, extension, swivel, and leveling features of the TV mount, demonstrating the range of motion available for optimal viewIng.

Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vašeho nástěnného držáku televizoru.

  • Čištění: Otřete držák měkkým, suchým hadříkem, abyste odstranili prach. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
  • Zkontrolujte připojení: Pravidelně kontrolujte všechny šrouby a spoje, zda jsou pevně utažené a bezpečné. V případě potřeby je dotáhněte.
  • Kontrola poškození: Pravidelně kontrolujte držák, zda nevykazuje známky opotřebení, koroze nebo poškození. Pokud zjistíte jakékoli problémy, přestaňte jej používat a kontaktujte zákaznickou podporu.

Odstraňování problémů

Pokud se během instalace nebo po ní setkáte s problémy, podívejte se na následující běžné problémy a jejich řešení.

Problém Možná příčina Řešení
Televizor není po instalaci v rovině. Drobné nesouososti během instalace. Use the +/-3° leveling adjustment feature. Loosen leveling screws, adjust, and re-tighten.
Držák se zdá být uvolněný nebo nestabilní. Screws not fully tightened; incorrect wall anchors used; wall structure insufficient. Ensure all mounting screws are securely tightened. Verify correct anchors for your wall type. If the wall is insufficient, consult a professional.
Obtížné nastavení náklonu nebo otočení. Adjustment knobs/bolts are too tight. Loosen the relevant adjustment knobs or bolts slightly, make the adjustment, then re-tighten to hold the position.
Držák na televizi nepasuje. Incorrect TV size, weight, or VESA pattern for the mount model. Verify your TV's specifications against the mount's compatibility (refer to Product Compatibility section).

Specifikace produktu

Funkce PSMFK7 Model PSMFK1 Model
Typ montáže Držák na zeď
Typ pohybu Kloubové, otočné, naklápěcí
Kompatibilní velikosti obrazovky 26 - 55 palců 26 - 60 palců
Maximální nosnost 70 lb (31.7 kg) 77 lb (35 kg)
Kompatibilita VESA 100x100mm až 400x400mm Až 400 x 400 mm
Úhel náklonu +5° / -15°
Úhel otočení +/-90° (up to 180° total, depending on TV size)
Nastavení vyrovnání +/-3°
Prodloužení od zdi 3.2 palce (zasunuté) až 19.17 palce (vysunuté)
Materiál Legovaná ocel
Kompatibilní typy stěn Single Wood Stud, Solid Concrete, Brick Wall

Záruka a podpora

For warranty information or technical support, please refer to the product packaging or contact PERLESMITH customer service directly. Keep your purchase receipt for warranty claims.

If you have any questions or require assistance with installation or operation, please do not hesitate to reach out to our support team.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.