Byron DBY-22311NP Wireless Doorbell Kit Instruction Manual

Zavedení

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Byron DBY-22311NP Wireless Doorbell Kit. Please read this manual carefully before using the product to ensure safe and efficient operation. Keep this manual for future reference.

The Byron DBY-22311NP wireless doorbell kit offers a maximum range of 150 meters and features 16 melodies with adjustable volume. Both the outdoor push button and the indoor chime unit are battery-operated, allowing for flexible placement anywhere in your home or garden.

Bezpečnostní informace

• Zajistěte opatrné zacházení se všemi součástmi, aby nedošlo k jejich poškození.
• Do not expose the push button or chime unit to extreme temperatures, direct sunlight for prolonged periods, or corrosive substances.
• Udržujte baterie mimo dosah dětí. Při požití okamžitě vyhledejte lékařskou pomoc.
• Použité baterie zlikvidujte v souladu s místními předpisy.
• Nepokoušejte se otevírat ani opravovat jednotky sami. O servis se obraťte na kvalifikovaný personál.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• 1 x Vnitřní zvonkohra
• 1 x Outdoor Push Button
• 1 x CR2032 Battery (for outdoor push button)
• Oboustranná lepicí páska
• Montážní šrouby a hmoždinky
• Návod k použití

Konec produktuview

Figure 1: Byron DBY-22311NP Wireless Doorbell Kit, showing the indoor chime unit and outdoor push button.

Figure 2: Detailed dimensions of the indoor chime unit and outdoor push button for installation planning.

Obrázek 3: Zadní view of the indoor chime unit and outdoor push button, showing battery compartments and mounting points.

Nastavení a instalace

1. Instalace baterií

• Outdoor Push Button: Open the battery compartment on the back of the push button. Insert the included CR2032 battery, ensuring correct polarity (+/-). Close the compartment securely.
• Indoor Chime Unit: Open the battery compartment on the back of the chime unit. Insert 3 x AA alkaline batteries (not included), ensuring correct polarity (+/-). Close the compartment securely.

2. Mounting the Outdoor Push Button

The outdoor push button can be mounted using either the double-sided adhesive tape or screws.

• Lepicí montáž: Clean the desired mounting surface thoroughly. Peel off the protective film from one side of the double-sided adhesive tape and apply it to the back of the push button. Peel off the remaining film and firmly press the push button onto the wall or door frame.
• Šroubová montáž: Mark the desired position for the push button. Drill two small pilot holes. Insert the wall plugs (if necessary) and secure the push button with the provided screws.

Figure 4: The outdoor push button is designed to be weather-resistant and includes a nameplate for personalization.

3. Placing the Indoor Chime Unit

The indoor chime unit is portable and can be placed anywhere within the 150-meter wireless range of the push button. Consider placing it in a central location or where you are most likely to hear it.

Figure 5: The indoor chime unit can be easily placed on a wall or flat surface.

Figure 6: The portable chime unit allows for flexible placement, even in outdoor areas like a garden patio.

4. Pairing (Synchronization)

The units are typically pre-paired at the factory. If they do not work immediately, follow these steps to re-pair them:

1. Press and hold the pairing button on the indoor chime unit for approximately 5 seconds until it emits a short beep or flashes.
2. Within 10 seconds, press the outdoor push button. The chime unit should ring, indicating successful pairing.
3. Test the doorbell by pressing the push button.

You can pair multiple chimes with one push button or multiple push buttons with one chime. This is ideal if you want a chime in several rooms or an additional push button in the garden or at the back door.

Návod k obsluze

1. Změna melodií

The chime unit offers 16 selectable melodies. To change the melody:

• Locate the melody selection button on the indoor chime unit.
• Opakovaným stisknutím tlačítka můžete procházet dostupné melodie. Zvonkohra přehraje každou melodii, kterou vyberete.
• Stop pressing when you hear your desired melody.

2. Nastavení hlasitosti

The volume of the chime can be adjusted up to 80 dB, with multiple levels available.

• Locate the volume control button on the indoor chime unit.
• Press the button to cycle through the volume levels.
• You can also set the chime to silent mode if you do not wish to be disturbed, for example, when a baby is sleeping.

Figure 7: The chime unit features controls for selecting from 16 melodies and adjusting between 5 volume levels.

Údržba

1. Výměna baterie

• Outdoor Push Button: When the push button's LED indicator no longer lights up or the range decreases significantly, replace the CR2032 battery.
• Indoor Chime Unit: If the chime unit's sound becomes weak or it stops working, replace the 3 x AA alkaline batteries.

2. Čištění

Otřete jednotky měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.

Odstraňování problémů

Specifikace

Video o produktu

Záruka a podpora

For warranty information and customer support, please refer to the contact details provided on the product packaging or the official Byron webUschovejte si doklad o koupi pro případné reklamace.