Funsicle Oasis Designer 14ft x 48in Round Above Ground Pool

Funsicle 14ft x 48in Round Oasis Designer Above Ground Pool Instruction Manual

Model: Oasis Designer 14ft x 48in Round Pool

Brand: Funsicle

Zavedení

This manual provides essential instructions for the safe assembly, operation, and maintenance of your Funsicle 14ft x 48in Round Oasis Designer Above Ground Pool. Please read this manual thoroughly before setting up and using your pool to ensure proper function and longevity. Keep this manual for future reference.

Důležité bezpečnostní informace

VAROVÁNÍ: Nedodržení těchto pokynů může vést k vážnému zranění nebo smrti.

  • Dohled dospělé osoby je vyžadován po celou dobu, kdy se děti nacházejí v bazénu nebo v jeho blízkosti.
  • Do not dive or jump into the pool. The pool depth is 48 inches (1.22 meters), which is not sufficient for diving.
  • Ujistěte se, že bazén je postaven na pevném a rovném povrchu bez ostrých předmětů.
  • Keep electrical cords and equipment away from water. Always use a GFCI (Ground Fault Circuit Interrupter) with the filter pump.
  • Secure the pool area to prevent unsupervised access, especially by young children.
  • Regularly inspect the pool liner, frame, and all components for damage. Do not use if damaged.
  • Udržujte správný chemický složení vody, abyste zajistili bezpečné a zdravé prostředí pro koupání.

Seznam komponent

Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, contact Funsicle customer support.

  • Pool Liner (Durable non-phthalates liner with rattan design)
  • SmartConnect™ Frame Poles (Ultra-strong oval metal frame with anti-corrosive matte finish)
  • SFX1000 SkimmerPlus® Filter Pump (with GFCI)
  • Type C Filter Cartridge
  • SureStep™ Ladder
  • Kryt bazénu
  • Podložka
  • Deluxe Maintenance Kit (includes vacuum, skimmer net, pole)
  • Opravná záplata
  • Hadice a Clamps pro filtrační čerpadlo
Diagram showing pool features including SmartConnect poles, pool cover, SureStep ladder, ground cloth, and durable puncture-resistant liner.
Figure 1: Key components and features of the Funsicle Oasis Designer Pool Set.
Cross-section diagram of the pool liner showing heavy gauge PVC layers and polyester mesh reinforcement.
Figure 2: Illustration of the durable 3-layered puncture-resistant liner construction.
Image of the SkimmerPlus Filter Pump and a Type C filter cartridge.
Figure 3: The SFX1000 SkimmerPlus Filter Pump and compatible Type C filter cartridge.
Image of the SureStep removable ladder.
Figure 4: The SureStep removable ladder for safe pool access.
Image showing the deluxe maintenance kit components: vacuum head, skimmer net, hose, pole, and clamps.
Figure 5: Components of the deluxe maintenance kit.

Pokyny pro nastavení

1. Výběr a příprava místa

  • Choose a level, solid surface for your pool. The area must be free of sharp objects, rocks, or debris.
  • Ensure the chosen site is away from overhead power lines, trees (to minimize debris), and structures that could be damaged by water.
  • Clear the area of any vegetation. Level the ground if necessary; even a slight incline can cause significant stress on the pool structure.
  • Lay out the ground cloth provided on the prepared site. This protects the pool liner from punctures.

2. Pool Assembly (SmartConnect™ Frame)

  • Unfold the pool liner and spread it out on the ground cloth, ensuring the drain plug is positioned correctly for future draining.
  • Identify the different frame poles. The SmartConnect™ poles feature a convenient snap-in design for easy assembly.
  • Assemble the top rail first by connecting the horizontal poles. Insert the vertical support legs into the designated slots on the top rail.
  • Ensure all connections are securely snapped into place. The frame should form a perfect circle.
  • Gently pull the liner outwards to ensure it is centered and wrinkle-free within the frame.

3. Instalace filtračního čerpadla a žebříku

  • Attach the SFX1000 SkimmerPlus® Filter Pump to the designated opening on the pool sidewall. Follow the pump's specific instructions for hose connections and clampIng.
  • Insert the Type C filter cartridge into the pump housing.
  • Assemble the SureStep™ Ladder according to its separate instructions. Place the ladder securely on a level surface outside the pool, with the steps extending into the pool.

4. Naplnění bazénu

  • Begin filling the pool with water. As the water level rises, smooth out any remaining wrinkles in the liner from the center outwards.
  • Naplňte bazén po doporučenou vodní rysku, která je obvykle uvedena na vložce bazénu nebo v návodu k obsluze čerpadla. Nepřeplňujte.
  • Once filled, check for any leaks around the pump connections or liner.

Provoz vašeho bazénu

1. SkimmerPlus® Filter Pump Operation

  • The SFX1000 SkimmerPlus® Filter Pump combines a skimmer and filter pump in one unit. The skimmer basket collects large debris like leaves and insects from the water surface.
  • The filter cartridge captures smaller particles, ensuring clean water.
  • Plug the pump into a GFCI-protected outlet. Run the pump for several hours daily to ensure adequate water circulation and filtration. The exact duration depends on pool usage and water conditions.
  • Regularly check and empty the skimmer basket.
Diagram illustrating the SkimmerPlus filter pump operation: skimmer basket picks up debris, filter cartridge captures small particles, and water flow at 1000 GPH.
Figure 6: How the SkimmerPlus Filter Pump functions to clean pool water.
Close-up image of the water return jet on the pool wall, showing water being returned to the pool.
Figure 7: Water return jet, ensuring proper circulation.

2. Chemie vody

  • Test your pool water regularly (daily or every other day) for pH, chlorine, and alkalinity levels using a pool test kit.
  • Udržujte pH mezi 7.2 a 7.6.
  • Maintain chlorine levels between 1-3 ppm (parts per million).
  • Add appropriate pool chemicals as needed, following the chemical manufacturer's instructions.
  • Always add chemicals to water, never water to chemicals.

Údržba

1. Denní údržba

  • Remove floating debris with a skimmer net.
  • Check and empty the skimmer basket.
  • Run the filter pump for sufficient hours.
  • Test water chemistry and adjust as necessary.

2. Týdenní údržba

  • Vacuum the pool floor using the deluxe maintenance kit to remove settled debris.
  • Očistěte stěny bazénu kartáčem, abyste zabránili růstu řas.
  • Backwash or clean the filter cartridge. For the Type C cartridge, remove and rinse thoroughly with a garden hose. Replace the cartridge every 2-4 weeks depending on usage.

3. Long-Term Maintenance / Winterization

  • At the end of the swimming season, drain the pool completely using the drain plug.
  • Clean the pool liner thoroughly with mild soap and water. Allow it to dry completely before folding.
  • Disassemble the frame and pump. Clean and dry all components.
  • Store all parts in a dry, protected area, away from extreme temperatures and pests.
Image of the Funsicle pool covered with the blue pool cover.
Figure 8: The pool cover helps keep out debris and reduce water evaporation.

Odstraňování problémů

ProblémMožná příčinaŘešení
Voda je kalná/špinaváInsufficient filtration; dirty filter cartridge; improper water chemistry.Run pump longer; clean/replace filter cartridge; test and adjust water chemistry (chlorine, pH).
Čerpadlo neběžíNot plugged in; GFCI tripped; motor issue.Check power connection; reset GFCI; contact customer support if motor issue suspected.
Voda unikající z bazénuHose connections loose; liner puncture.Utáhněte hadici třamps; locate and repair puncture with provided patch kit.
Růst řasLow chlorine; high pH; insufficient circulation.Shock treat with chlorine; adjust pH; brush walls; run pump more.

Specifikace

  • Model: Funsicle Oasis Designer Above Ground Pool
  • Rozměry: 14 feet (4.27 meters) diameter x 48 inches (1.22 meters) height
  • Tvar: Kolo
  • Barva: Dark Double Rattan
  • Materiál: Durable 3-ply PVC with polyester mesh reinforcement
  • Filtrační čerpadlo: SFX1000 SkimmerPlus® Filter Pump (1000 GPH)
  • Typ filtrační patrony: Typ C
  • Kapacita: Approximately 4,000 gallons (15,140 liters) at 90% fill

Záruka a zákaznická podpora

Funsicle products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official Funsicle website. If you encounter any issues or require assistance, please contact Funsicle customer support:

Webmísto: Visit the Funsicle Store on Amazon (obecné dotazy a informace o produktech)

Kontaktní údaje: Refer to your product packaging or the Funsicle website for the most current customer service contact details (phone number, email).

© 2024 Funsicle. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.