Uživatelská příručka k plynovému ramenu FLEXISPOT F8L

1. Úvod

Thank you for choosing the FLEXISPOT F8L Gas Spring Monitor Arm. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor arm. Please read this manual thoroughly before use and keep it for future reference.

Klíčové vlastnosti:

• Detachable VESA plate for easy monitor attachment.
• Adjustable height for ergonomic viewing, reducing neck, eye, and back strain.
• Wide range of motion for tilt, swivel, and rotation, allowing optimal viewing úhly.
• Compact design suitable for narrow desks, enabling side-by-side monitor placement at a distance.
• Supports VESA standards: 75x75mm and 100x100mm.
• Compatible with monitors from 17" to 36" and weighing between 2-9kg.

This image shows the FLEXISPOT F8L Gas Spring Monitor Arm in white, supporting a monitor. The arm is extended, demonstrating its adjustable nature and sleek design.

2. Bezpečnostní pokyny

• Před montáží se ujistěte, že jsou všechny díly přítomny a nepoškozené. Nepoužívejte, pokud některé díly chybí nebo jsou vadné.
• Do not exceed the maximum weight capacity of 9kg (19.8 lbs) or the maximum screen size of 36 inches. Overloading can cause instability and potential injury.
• Install the monitor arm on a stable and sturdy desk surface that can support the combined weight of the arm and your monitor.
• Perform all adjustments slowly and carefully. Avoid sudden movements that could cause the monitor to swing or fall.
• Udržujte děti a domácí zvířata mimo dosah místa instalace.
• If you encounter any difficulties during installation or operation, refer to the troubleshooting section or contact customer support.

3. Obsah balení

Zkontrolujte prosím, zda jsou všechny součásti součástí balení:

• Sestava ramene monitoru
• Stůl Clamp Báze
• Základna pro montáž na průchodku
• Deska VESA
• Sada hardwaru (šrouby, podložky, imbusové klíče)
• Klipy pro správu kabelů
• Návod k použití

4. Nastavení a instalace

The FLEXISPOT F8L monitor arm supports two installation methods: C-clamp and Grommet mount. Choose the method suitable for your desk.

4.1 Choosing Your Mounting Method

This diagram illustrates the two primary ways to attach the monitor arm to your desk: the C-clamp method (bottom right) for desk edges and the grommet mount method (top right) for desks with existing cable holes. The grommet mount requires a hole size of 8.5-70mm, and both methods support a desk thickness of 20-100mm.

• C-Clamp Montáž: Ideal for desks with edges. Supports desk thickness from 20mm to 100mm.
• Grommet Mount: Requires an existing hole in your desk (diameter 8.5mm to 70mm). Supports desk thickness from 20mm to 100mm.

4.2 Attaching the Monitor Arm to Your Desk

1. Pro C-Clamp Montáž:
   • Připojte C-clamp base to the main pole of the monitor arm.
   • Umístěte třamp on the edge of your desk and tighten the knob until it is securely fastened.
2. Pro montáž s průchodkou:
   • Assemble the grommet mount base and insert it through the hole in your desk.
   • Secure it from underneath the desk using the provided plate and nut.

4.3 Připevnění monitoru k rameni

This image demonstrates the detachable VESA plate feature. The VESA plate can be easily removed from the monitor arm, allowing you to attach it to the back of your monitor first, and then slide the monitor with the plate onto the arm for a simpler installation process.

1. Připojte desku VESA k monitoru:
   • Remove the VESA plate from the monitor arm by lifting it upwards.
   • Zarovnejte desku VESA s montážními otvory na zadní straně monitoru (75x75 mm nebo 100x100 mm).
   • Připevněte desku k monitoru pomocí příslušných šroubů ze sady hardwaru. Nepřetahujte je.
2. Montáž monitoru na rameno:
   • Carefully slide the monitor (with the attached VESA plate) onto the arm's mounting head until it clicks into place.
   • Ensure the monitor is securely seated before releasing to.

5. Obsluha a seřízení

The FLEXISPOT F8L monitor arm offers a wide range of adjustments to achieve your optimal viewzkušenosti.

5.1 Nastavení napětí plynové pružiny

The gas spring tension needs to be adjusted according to your monitor's weight to ensure smooth and stable movement. If the monitor sags or springs up too easily, adjust the tension screw located on the arm joint (often covered by a plastic cap).

• Use the provided Allen wrench to turn the screw.
• Otočte se ve směru hodinových ručiček to increase tension (for heavier monitors).
• Otočte se proti směru hodinových ručiček to decrease tension (for lighter monitors).
• Adjust gradually until the monitor stays in position when released.

5.2 Monitor Position Adjustments

This diagram illustrates the extensive range of motion for the monitor arm, including 360° rotation, 180° horizontal swivel, and tilt adjustment from -90° to 15°. These features allow for precise positioning of your monitor.

• Nastavení výšky: Gently push or pull the monitor up or down to adjust its vertical position. The gas spring will hold it in place.
• Nastavení sklonu: Tilt the monitor screen up or down from -90° to 15° to reduce glare and optimize viewúhel.
• Nastavení otáčení: Swivel the monitor arm horizontally up to 180° to share your screen or change viewsměr.
• Nastavení rotace: Rotate the monitor 360° between landscape and portrait orientations.

This illustration compares typical poor posture when using a fixed monitor stand (left) versus the improved ergonomic posture achievable with a monitor arm (right). By allowing flexible height and angle adjustments, the monitor arm helps reduce strain on the neck, eyes, and back.

6. Údržba

• Regularly check all screws and connections to ensure they are tight and secure. Retighten if necessary.
• Rameno monitoru očistěte měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, která by mohla poškodit povrchovou úpravu.
• Do not lubricate the gas spring mechanism. It is designed to be maintenance-free.

7. Řešení problémů

8. Specifikace

This diagram provides key dimensions of the monitor arm, including a maximum height of approximately 51cm and a maximum horizontal extension of approximately 62cm, illustrating its reach and adjustability.

9. Záruka a zákaznická podpora

FLEXISPOT provides a 1-letá záruka from the date of purchase for this product. This warranty covers manufacturing defects and material flaws under normal use.

For any questions, concerns, or issues regarding your FLEXISPOT F8L Gas Spring Monitor Arm, please contact our customer support team:

• E-mail: contact@flexispot.jp
• Please provide your purchase details and a description of the issue for faster assistance.