ThermoPro TP260B Indoor Outdoor Thermometer User Manual

Konec produktuview

The ThermoPro TP260B is a professional-grade indoor/outdoor thermometer and hygrometer designed for accurate and reliable monitoring of temperature and humidity. Featuring a market-leading 1000ft/300m wireless range, it allows you to monitor conditions in multiple locations around your home or property. The main unit displays both indoor and outdoor readings, including trend arrows and 24-hour high/low records. Its easy-to-read backlit display and touch buttons ensure user-friendly operation. The remote sensor is weatherproof and cold-resistant, making it suitable for various outdoor environments.

Figure 1: ThermoPro TP260B Main Unit and Remote Sensor

Obsah balení

• 1 x Hlavní teploměr
• 1 x dálkový snímač teploty
• 4 baterií velikosti AAA (součástí balení)
• 1 x Uživatelská příručka

Key Components and Display

Obrázek 2: Detailní view of the main unit's display and touch buttons.

The main unit features a large, clear LCD display with distinct sections for indoor and outdoor readings. Key indicators include:

• VEN: Venkovní teplota a vlhkost.
• V: Vnitřní teplota a vlhkost.
• CH1/2/3: Indicates the channel of the remote sensor being displayed.
• MAX/MIN: Displays the highest and lowest recorded temperature/humidity over the last 24 hours.
• Trendové šipky: Shows whether temperature/humidity is rising, falling, or remaining stable.
• Indikátor slabé baterie: Upozorní, když je třeba vyměnit baterie.
• Tlačítko °F/°C: Přepíná mezi stupni Fahrenheita a Celsia.
• Tlačítko CH/SYNC: Used for channel selection and sensor synchronization.
• Lehké dotykové tlačítko: Activates the display backlight for improved visibility in low light.
• Tlačítko MAX/MIN/CLEAR: Toggles between Max/Min readings and clears recorded data.

Nastavení

1. Instalace baterie

1. Hlavní jednotka: Open the battery compartment on the back of the main unit. Insert 2 x AAA batteries, ensuring correct polarity (+/-). Close the compartment.
2. Dálkový senzor: Open the battery compartment on the back of the remote sensor. Insert 2 x AAA batteries, ensuring correct polarity (+/-). Close the compartment.

2. Synchronizace

The main unit and remote sensor should automatically synchronize once batteries are installed. If synchronization fails or you are adding additional sensors, follow these steps:

• Place the main unit and remote sensor close to each other.
• Stiskněte a podržte CH/SYNC button on the main unit for 3 seconds. The display will flash, indicating it is searching for the sensor.
• Stiskněte tlačítko RESETOVAT tlačítko na zadní straně dálkového senzoru.
• The main unit should display the remote sensor's readings within a few minutes.

Poznámka: The ThermoPro TP260B supports up to 3 remote sensors (sold separately). To add more sensors, repeat the synchronization process for each additional sensor, selecting a different channel (CH1, CH2, or CH3) on the main unit using the CH/SYNC tlačítko.

Figure 3: The main unit can connect with up to three remote sensors.

3. Možnosti umístění

The main unit offers versatile placement options:

• Stolní stojan: Use the integrated fold-out stand for desktop or shelf placement.
• Montáž na stěnu: K připevnění na zeď použijte závěsný otvor na zadní straně.
• Vestavěný magnet: Attach the unit to any metallic surface, such as a refrigerator.

For the remote sensor, choose a location that provides accurate readings and is within the 1000ft wireless range. Avoid direct sunlight or areas with extreme temperature fluctuations. The sensor is weatherproof, but placing it under an overhang or in a sheltered spot can prolong its lifespan.

Obrázek 4: Různé možnosti umístění hlavní jednotky.

Návod k obsluze

1. Přepínání teplotních jednotek (°F/°C)

Stiskněte tlačítko °F/°C button on the front of the main unit to toggle between Fahrenheit and Celsius temperature displays.

2. Aktivace podsvícení

Dotkněte se Světlo button (light bulb icon) on the front of the main unit to activate the backlight for 15 seconds, improving readability in dark conditions.

Figure 5: The LCD screen features a backlight for easy reading.

3. ViewZaznamenávání a mazání záznamů MAX/MIN

Stiskněte tlačítko MAX/MIN/CLEAR jedním stisknutím tlačítka view the maximum temperature and humidity recorded since the last reset. Press it again to view the minimum records. To clear the 24-hour high/low records, press and hold the MAX/MIN/CLEAR tlačítko na 3 sekund.

4. Monitoring Multiple Channels

Pokud máte více dálkových senzorů, stiskněte CH/SYNC button repeatedly to cycle through the channels (CH1, CH2, CH3) and view the readings from each sensor. The main unit will automatically scroll through all active channels every few seconds.

Údržba

1. Výměna baterie

When the low battery indicator appears on the display, replace the batteries in the respective unit (main unit or remote sensor) with new AAA batteries. Ensure correct polarity.

Důležitá poznámka: If you only replace the remote sensor battery, please press and hold the CH/SYNC button of the receiver for 3 seconds to re-register, or by reinstalling the battery of the receiver within 3 minutes and then they will automatically resynchronize the data.

2. Čištění a skladování

Očistěte jednotku a senzor měkkým hadříkemamp cloth. Do not immerse in water or use abrasive cleaners. Store the device in a dry place away from extreme temperatures when not in use for extended periods.

Figure 6: The remote sensor is designed to withstand various weather conditions.

Odstraňování problémů

• No readings on display or "---" shown:
  • Zkontrolujte, zda jsou baterie správně vloženy se správnou polaritou.
  • Vyměňte staré baterie za nové.
  • Ensure the main unit and sensor are within the 1000ft wireless range and free from major obstructions.
  • Perform a manual synchronization as described in the "Setup" section.
• Nepřesné údaje:
  • Ensure the sensor is not placed in direct sunlight, near heat sources, or in areas with poor air circulation.
  • Allow the units to stabilize for at least 30 minutes after setup for accurate readings.
  • The 1000-ft range may be affected by obstructions in your home layout (including walls, router, trees, and bushes as well as building materials such as metal and glass). Try relocating the sensor or main unit.
• Displej je slabý nebo bliká:
  • Vyměňte baterie v hlavní jednotce.

Specifikace

Záruka a podpora

ThermoPro products come with a warranty. For detailed warranty information, product registration, or technical support, please visit the official ThermoPro webwebu nebo se podívejte na kontaktní informace uvedené na obalu produktu.

Kompletní uživatelskou příručku si můžete stáhnout také ve formátu PDF zde: ThermoPro TP260B User Manual (PDF)