Flutesan Solar Battery Controller User Manual

1. Úvod

Thank you for choosing the Flutesan Solar Battery Controller. This device is designed to manage the power flow from your solar panel to your battery, ensuring efficient charging and protecting your battery from overcharge and over-discharge. It features an adjustable LCD display, dual USB ports, and PWM auto-parameter management. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your solar system.

2. Bezpečnostní informace

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the controller, battery, or other components, and may void your warranty.

• Ensure all connections are correct and secure before connecting to power. Incorrect wiring can cause damage.
• Vždy nejprve připojte baterii, poté solární panel a nakonec zátěž. Odpojení provádějte v opačném pořadí.
• The controller is designed for 12V/24V lead-acid batteries (GEL, FLOODED, SLD). Do not use with other battery types unless specified.
• Install the controller in a well-ventilated, dry, and cool environment, away from direct sunlight, high temperatures, and moisture.
• Nerozebírejte ani se nepokoušejte o opravu ovladače sami. Servis svěřte kvalifikovanému personálu.
• The controller has built-in overcurrent, open circuit, reverse polarity, and short-circuit protection. These are self-recovery types and do not harm the controller.

3. Konec produktuview

The Flutesan Solar Battery Controller is equipped with an industrial-grade main control chip and a high-definition LCD display for clear operation and monitoring.

3.1. Klíčové vlastnosti

• Industrial-Grade Main Control Chip: Ensures stable and reliable performance.
• Full 3-Level PWM Charge Management: Optimizes battery charging for extended life.
• Dual MOS Anti-Backflow Circuit: Prevents current from flowing back from the battery to the solar panel at night.
• Ultra-Low Heat Generation: Improves system efficiency and longevity.
• Komplexní ochranné funkce: Includes overcurrent, open circuit, reverse polarity, and short-circuit protection.
• Adjustable LCD Display: Provides clear, intuitive monitoring of system parameters.
• Dual USB Ports (5V/2A): Supports charging of mobile phones and other 5V devices.
• Automatic 12V/24V System Identification: Automaticky detekuje systém voltage.
• ABS Engineering Plastic Shell: High strength, impact resistance, anti-aging, and corrosion resistance for enhanced durability.

3.2. Komponenty produktu

Obrázek 3.2.1: Přední strana view of the Flutesan Solar Battery Controller, highlighting the LCD display, control buttons, and dual USB ports.

Figure 3.2.2: Product dimensions of the solar charge controller (approximately 13.3cm/5.23in length, 7cm/2.75in width, 5cm/1.96in height).

Obrázek 3.2.3: Detailní view of the LCD display and control buttons, showing indicators for Voltage, Hour, Amper, Load, Output, and Floating Charge.

4. Nastavení a instalace

Follow these steps for proper installation of your solar charge controller. Ensure all power sources are disconnected before making any connections.

1. Připravte místo instalace: Choose a dry, well-ventilated location away from direct sunlight and moisture. Ensure there is sufficient space around the controller for air circulation.
2. Připojte baterii: Connect the battery to the controller's battery terminals (marked with battery symbols). Ensure correct polarity (+ to + and - to -). The LCD display will light up if the connection is successful.
3. Připojte solární panel: Connect the solar panel to the controller's solar panel terminals (marked with solar panel symbols). Ensure correct polarity.
4. Připojení zátěže (volitelné): Connect your DC load to the controller's load terminals (marked with light bulb symbols). Ensure correct polarity. Do not connect AC loads directly to the controller.
5. Ověřte připojení: Před připojením napájení dvakrát zkontrolujte všechna připojení, zda jsou pevně utažená a zda je polarita správná.

Figure 4.1: System Connection Diagram. Always connect battery first, then solar panel, then load.

5. Návod k obsluze

The controller features an intuitive LCD display and three buttons for easy operation and parameter adjustment.

5.1. Funkce tlačítek

• Tlačítko MENU: Short press to cycle through various display interfaces and parameters. Long press for 5 seconds to enter or exit parameter setting mode.
• Tlačítko NAHORU: Used to increase parameter values in setting mode.
• Tlačítko DOLŮ/ZAP/VYP: Used to decrease parameter values in setting mode. Short press to turn the load ON/OFF when on the main display interface.

Figure 5.1: Browsing Interface and Parameter Setting. Short press MENU to cycle, long press to set.

5.2. Browsing Display Interfaces

Krátce stiskněte MENU key to cycle through the following interfaces:

• Main Page (Battery Voltage, Solar Charge Status, Load Status)
• Float Voltage (F01)
• Discharge Recovery Voltage (F02)
• Vypínací mezní objemtage (F03)
• Load Working Mode (F04)
• Battery Type (F05)

5.3. Nastavení parametrů

Chcete-li upravit parametry:

1. Navigate to the desired parameter interface (e.g., F01, F02, F03, F04, F05) by short pressing the MENU tlačítko.
2. Dlouze stiskněte MENU key for 5 seconds until the number on the display starts flashing. This indicates you are in setting mode.
3. Použijte UP a DOLŮ keys to adjust the parameter value.
4. Once the desired value is set, long press the MENU key for 5 seconds again to save the setting and exit the setting mode. The number will stop flashing.
5. To restore default values, long press the UP key for 5 seconds when in interfaces 2-5.

Poznámka: The controller automatically identifies 12V/24V systems. Ensure your battery type setting (F05) matches your battery for optimal charging.

6. Údržba

Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon vašeho solárního regulátoru nabíjení.

• Čistota: Keep the controller clean and free from dust and debris. Use a dry cloth to wipe the surface.
• Spojení: Periodically check all wiring connections to ensure they are tight and free from corrosion. Loose connections can cause overheating and damage.
• Větrání: Zajistěte dobré větrání instalačního prostoru, aby se zabránilo přehřátí regulátoru.
• Podmínky prostředí: Protect the controller from extreme temperatures, direct water exposure, and high humidity.
• Stav baterie: Monitor your battery's health and ensure it is properly maintained according to its manufacturer's guidelines.

7. Řešení problémů

Tato část se zabývá běžnými problémy, se kterými se můžete setkat u regulátoru solárního nabíjení.

8. Specifikace

9. Záruka a podpora

Flutesan products are manufactured with high-quality materials and undergo strict quality control. For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer.

For technical support, troubleshooting assistance, or any inquiries regarding your Flutesan Solar Battery Controller, please contact our customer service team through the retailer's support channels or visit the official Flutesan store page on Amazon.

Online podpora: Flutesan Store on Amazon