Zavedení
The Kittmip Solar Ultrasonic Animal Repellent is designed to deter various animals from your garden, yard, or flower beds using ultrasonic waves and LED lights. This device operates on solar power, offering a low-maintenance and humane solution for animal control without the use of chemicals or harmful traps.
Vlastnosti produktu
- Solární napájení: Equipped with a solar panel for automatic charging, eliminating the need for external power sources or battery replacements.
- Aktivace pohybového senzoru: An infrared (PIR) sensor detects animal movement within its range, triggering ultrasonic waves and LED lights.
- Ultrasonic Waves & LED Lights: Emits high-frequency sound waves and flashes LED lights to create an uncomfortable environment for animals, encouraging them to leave the protected area.
- Humane Deterrence: Designed to repel animals without causing them harm, making it an ideal choice for ethical pest control.
- Vodotěsné provedení (IP44): Built to withstand various weather conditions, ensuring reliable operation outdoors.
- Snadná instalace: Simple to assemble and insert into the ground.
Figure 1: Key Components of the Repellent Device
Figure 2: Waterproof Design for Outdoor Use
Pokyny pro nastavení
- Rozbalte zařízení: Carefully remove all components from the packaging. The package typically includes the repellent head and a ground stake.
- Sestavte kůl: Connect the ground stake sections if necessary, then attach the assembled stake to the bottom of the repellent head. Ensure it is securely fastened.
- Odstraňte ochrannou fólii: Before first use, locate and remove the protective film from the solar panel on top of the device.
- Aktivujte zařízení: Locate the power switch, usually on the underside or back of the repellent head, and switch it to the "ON" position.
- Umístění: Choose a location in your garden, yard, or flower bed that receives direct sunlight for most of the day to ensure optimal solar charging. Insert the ground stake firmly into the soil.
- Počáteční poplatek: For the first use, allow the device to charge under direct sunlight for 3-4 days to ensure the internal battery is fully charged.
Video 1: Demonstration of the Kittmip Solar Ultrasonic Animal Repellent setup and operation.
Figure 3: Solar Energy Charging and Initial Use Tip
Návod k obsluze
Once set up and charged, the Kittmip Solar Ultrasonic Animal Repellent operates automatically:
- The PIR motion sensor continuously monitors the protected area.
- When an animal enters the sensor's detection range (approximately 110-degree angle), the device will activate.
- Upon activation, it emits ultrasonic sound waves and flashes its LED lights. These stimuli are designed to be unpleasant for target animals like cats, dogs, foxes, raccoons, and squirrels, causing them to leave the area.
- The device will cease activation once the animal leaves the detection zone.
- Operation is quiet for humans and does not involve chemicals, ensuring safety for your family and pets.
Figure 4: Repellent in Action
Údržba
- Čistý solární panel: Solární panel pravidelně otírejte měkkým hadříkemamp hadříkem, abyste odstranili prach, nečistoty nebo úlomky. Čistý panel zajišťuje efektivní nabíjení.
- Jasné překážky: Ensure no plants, leaves, or other objects are blocking the PIR sensor or the ultrasonic speakers, as this can reduce effectiveness.
- Zkontrolujte umístění: Periodically verify that the device is still firmly planted in the ground and has not been dislodged by weather or animals.
- Životnost baterie: While solar-powered, the internal rechargeable battery has a lifespan. If the device's performance significantly degrades over time, the battery may need replacement (consult manufacturer for details).
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Device not activating | Vypínač je vypnutý Nedostatečný solární náboj PIR sensor blocked | Ujistěte se, že je spínač zapnutý Place in direct sunlight for 3-4 days Clear any obstructions from the sensor |
| Snížená účinnost | Solární panel je špinavý Speakers/sensor blocked Animals have high tolerance | Vyčistěte solární panel Odstraňte překážky Adjust placement or consider additional units |
| LED kontrolky neblikají | Slabá baterie Porucha zařízení | Ensure adequate solar charge Pokud problém přetrvává, kontaktujte zákaznickou podporu |
Specifikace
- Značka: Kittmip
- Číslo modelu: TJ-S1PL-HARE
- Číslo dílu výrobce: S3-SLTL-HARE
- Barva: Zelený
- Rozměry produktu: 11.02 cm D x 6.3 cm Š x 3.15 cm V
- Hmotnost položky: 1.3 libry
- Počet kusů: 2 (v balení)
- Zdroj napájení: Sluneční
- Cílové druhy: Cat, Fox, Raccoon, Squirrel (and similar pests)
- Voděodolnost: IP44
Obrázek 5: Rozměry produktu
Záruka a podpora
No specific warranty information was provided with the product details. For any support inquiries, warranty claims, or further assistance, please refer to the contact information provided on the product packaging or the retailer's webmísto, kde byl produkt zakoupen.