GRAUGEAR G-MP01CR Návod k obsluze 3.5palcového předního USB C Hubu a čtečky karet

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your GRAUGEAR G-MP01CR 3.5 Inch Front Panel USB C Hub and Card Reader. This device is designed to expand the connectivity of your desktop computer by providing convenient front-panel access to high-speed USB ports and memory card slots.

Image 1.1: The GRAUGEAR G-MP01CR Front Panel USB Hub and Card Reader with its connecting cables.

2. Obsah balení

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact customer service.

• 1x GRAUGEAR G-MP01CR 3.5'' Front Panel USB Hub with Internal Card Reader
• 6x montážní šrouby
• 1x USB 3.2 Type-E Key-A 20-Pin Header Cable
• 1x USB 3.0 19-Pin Header Cable
• 1x Návod k použití
• 1x Servisní karta

Image 2.1: All components included in the GRAUGEAR G-MP01CR package.

3. Specifikace

Image 3.1: Detailed dimensions and connection specifications for the G-MP01CR.

4. Instalační příručka

Follow these steps to properly install the GRAUGEAR G-MP01CR into your desktop computer.

4.1 Příprava

1. Vypnout: Ujistěte se, že je počítač zcela vypnutý a odpojený od zásuvky.
2. Otevřený případ: Pro přístup k vnitřním komponentám sejměte boční panel skříně počítače.
3. Lokalizovat záliv: Identify an available 3.5-inch floppy disk drive bay. If only 5.25-inch bays are available, a 5.25-inch to 3.5-inch adapter bracket (not included) will be required.
4. Identify Headers: Locate the following headers on your motherboard:
   • An available 19-pin USB 3.0 header.
   • An available 20-pin USB 3.2 Key-A Type-E header. (Note: Some older motherboards may not have this header. A separate adapter card might be necessary to utilize the 20Gbps USB-C port.)

Image 4.1: Illustration of connecting the USB 3.2 Gen 2 Key A host and USB 3.0 19 Pin host cables to the motherboard.

4.2 Montáž jednotky

5. Vložit jednotku: Slide the GRAUGEAR G-MP01CR into the chosen 3.5-inch bay from the front of the computer case.
6. Zabezpečená jednotka: Use the provided mounting screws to secure the unit firmly into the drive bay.

Image 4.2: The front panel hub installed in a 3.5-inch bay of a desktop computer.

4.3 Propojovací kabely

7. Connect USB 3.0 Cable: Plug the 19-pin USB 3.0 cable from the G-MP01CR into the corresponding 19-pin USB 3.0 header on your motherboard.
8. Connect USB 3.2 Gen 2x2 Cable: Plug the 20-pin USB 3.2 Key-A Type-E cable from the G-MP01CR into the corresponding 20-pin USB 3.2 Key-A Type-E header on your motherboard. Ensure correct orientation to avoid damage.
9. Připojení napájení SATA: Connect a 15-pin SATA power connector from your power supply unit (PSU) to the SATA power input on the G-MP01CR. This connection is essential for the card reader and external hard drives to function correctly.

Image 4.3: Illustration of connecting the 15-pin SATA power cable to the front panel unit.

Image 4.4: Diagram showing the connection of the USB 3.2 Gen 2 Key A host and USB 3.0 19 Pin host cables to the motherboard, along with the SATA power connection.

4.4 Závěrečné kroky

10. Zavřít případ: Znovu nasaďte boční panel skříně počítače.
11. Zapnutí: Plug in your computer and power it on. The operating system should automatically detect and install the necessary drivers.

5. Návod k obsluze

The GRAUGEAR G-MP01CR provides multiple ports for data transfer and card reading.

5.1 USB porty

• USB Type-C (20 Gbps): This port supports USB 3.2 Gen 2x2, offering data transfer speeds up to 20 Gigabits per second. Use this port for high-speed devices like external SSDs.
• USB Type-C (5 Gbps): This port supports USB 3.2 Gen 1, offering data transfer speeds up to 5 Gigabits per second.
• USB Type-A (5 Gbps): The two USB Type-A ports support USB 3.0, providing data transfer speeds up to 5 Gigabits per second. These are compatible with most standard USB devices.

Image 5.1: Illustration of the USB Type-C port supporting 20 Gbps data transfer.

Obrázek 5.2: Příkladample benchmark results demonstrating 20 Gbps transfer speeds.

5.2 Card Readers

• Slot pro SD kartu: Insert your SD card with the label facing down (upside down) for proper recognition.
• Slot pro kartu MicroSD/TF: Insert your microSD or TF card into the designated slot.

Image 5.3: Guide for correct SD card insertion (label down).

6. Údržba

To ensure the longevity and optimal performance of your GRAUGEAR G-MP01CR, follow these general maintenance guidelines:

• Udržujte jednotku bez prachu a nečistot. K čištění používejte měkký, suchý hadřík.
• Avoid exposing the unit to liquids or excessive moisture.
• Do not attempt to disassemble the unit, as this may void the warranty and cause damage.

7. Řešení problémů

If you encounter issues with your GRAUGEAR G-MP01CR, refer to the following troubleshooting tips:

• Žádné napájení/zařízení nebylo detekováno:
  • Ensure the 15-pin SATA power connector is securely attached to the unit and connected to your PSU. The card reader and some USB functions require this power.
  • Verify that the 19-pin USB 3.0 and 20-pin USB 3.2 Key-A Type-E cables are correctly and firmly plugged into their respective headers on the motherboard. Incorrect orientation of the Type-E connector can prevent functionality.
  • Check your motherboard's manual to confirm the presence and location of the required headers.
• Pomalé rychlosti přenosu dat:
  • Ensure you are using the correct USB port for your device's capabilities. The 20Gbps USB-C port requires a USB 3.2 Gen 2x2 compatible device and motherboard header to achieve maximum speeds.
  • Verify that your cables are rated for the desired speed (e.g., USB 3.2 Gen 2x2 cables for 20Gbps).
  • Confirm that your motherboard drivers are up to date.
• Karta SD/MicroSD nebyla detekována:
  • Ensure the SD card is inserted correctly, with the label facing down.
  • Check if the card is properly seated in the slot.
  • Test the card in another device to rule out card malfunction.
• Unit Does Not Fit 3.5-inch Bay:
  • Confirm that the bay is indeed a standard 3.5-inch bay. If you are attempting to install it in a 5.25-inch bay, an adapter bracket is required.

8. Záruka a podpora

GRAUGEAR products are designed for reliability and performance. For warranty information, please refer to the included Service Card in your package.

For technical support or further assistance, please visit the official GRAUGEAR webnebo kontaktujte jejich zákaznický servis.

Oficiální Webmísto: www.graugear.de