EASYGUARD ERS001 Remote Starter Module User Manual

1. Úvod

The EASYGUARD ERS001 is a universal remote starter module designed for key start DC12V vehicles. It is compatible with both automatic and manual transmission vehicles, as well as diesel and gasoline engines. This module allows you to remotely start or stop your vehicle using your existing factory original remote control or an aftermarket remote control. This kit does not include a separate remote control.

2. Hlavní vlastnosti

• Remote Engine Start & Stop: Utilize your vehicle's existing key fobs or aftermarket key fobs to remotely start and stop the engine.
• Kompatibilita: Designed to be compatible with your car's existing alarm system or keyless entry system.
• Adjustable Engine Start Time: The remote engine start duration can be set to either 10 or 20 minutes (default is 10 minutes).
• Automatic Vehicle Lock: The vehicle will automatically lock after a successful remote start.
• Immobilizer Bypass Requirement: If your vehicle has a chip immobilizer in its original remote, an additional bypass module (e.g., ASIN: B07NSLPBG7 or B00MEHBVIC) is required for proper function.

Image: Illustration of remote engine start as a main feature.

Image: Diagram highlighting remote engine stop as an optional feature and a note regarding immobilizer bypass.

Image: Visual representation of the module's compatibility with existing car alarm or keyless entry systems.

3. Obsah balení

The EASYGUARD ERS001 package includes the following components:

• ERS001 Control Module
• 6-pin Ignition Wire Harness
• Hlavní kabelový svazek
• Engine Cut-off Switch Wire

Image: The main control module and the included wire harnesses.

Obrázek: Podrobný view of the individual wire harnesses: 6-pin ignition wire, main wire, and engine cut-off switch.

Obrázek: Detail views of the ERS001 control module from different angles.

4. Pokyny k instalaci

Doporučená profesionální instalace: This remote starter should be installed by a professional installer. Incorrect installation can lead to vehicle damage or malfunction.

Bezpečnostní opatření:

• Always measure voltage with a voltmeter before making connections.
• Connect all cables properly before plugging them into the starter module control box.
• Ensure all connections are secure to prevent short circuits or loose contacts.

Obejití imobilizéru: If your car's original remote has a chip immobilizer, an additional bypass module is required. This bypass module should be placed where the keyhole senses the chip, otherwise the car will not start.

Image: Visual guide detailing installation instructions and product specifications.

5. Místo instalace

It is recommended to fix the module in a dry place using adhesive or similar methods. A suitable location is often near the fuse box, which is typically located above the foot brake.

6. Návod k obsluze

To remotely start or stop your vehicle using your existing remote control:

1. Ensure the vehicle is in a locked state.
2. Press the unlock button on your original remote control three (3) consecutive times.
3. Pressing the button too fast or too slow may prevent the command from registering. Aim for approximately one second per press.

Poznámka: The remote engine cut-off function is only applicable to vehicles that can disarm or unlock when the key is turned to the ON position.

Image: Illustration demonstrating the remote start/stop method by pressing the unlock button three times.

7. Řešení problémů

If you encounter issues with your EASYGUARD ERS001 Remote Starter Module, consider the following:

• Vozidlo nestartuje: Verify all wiring connections are secure and correct. Check if a bypass module is needed and properly installed for vehicles with chip immobilizers.
• Remote Command Not Responding: Ensure you are pressing the unlock button on your remote control three times with consistent timing (approximately one second per press). Check the battery in your remote control.
• Engine Cuts Off Unexpectedly: Confirm that your vehicle supports the remote engine cut-off function (i.e., it can disarm/unlock when the key is in the ON position).
• Obecná porucha: Re-check all installation steps. If problems persist, consult with a professional automotive electrician or the product manufacturer for assistance.

8. Specifikace

Image: Table summarizing the product's technical specifications.