CCYLEZ AK-C211008 Wireless RF Remote Control Relay Module User Manual

1. Konec produktuview

The CCYLEZ AK-C211008 Wireless RF Remote Control Relay Module is a versatile 4-channel device designed for remote control applications. Utilizing advanced RF technology, it enables stable and reliable control of various electrical systems through walls, floors, and doors. This module is ideal for automating lighting, electric doors and windows, lifting equipment, gates, and elevators, offering high security and ease of use.

Figure 1: The AK-C211008 Relay Module and accompanying remote controls.

2. Vlastnosti

• Advanced RF Technology: Signals can be transmitted reliably through walls, floors, and doors, ensuring stable control anywhere within the operational range.
• Vysoká bezpečnost: Features a high-security learning code system. If a remote control is lost, old codes can be easily deleted and new ones learned, maintaining system security.
• Snadné použití: Designed for straightforward setup, learning, relearning, and control. Offers stable and reliable performance with high reception sensitivity.
• Široká aplikace: Primarily used in lamps and lanterns, electric doors and windows, lifting equipment, gates, elevators, industrial control, and security systems.
• Více provozních režimů: Supports three distinct operating modes: Jog (Momentary), Self-Locking (Toggle), and Interlock, providing flexibility for various control needs.
• Odolnost proti rušení: Adopts non-directional wireless encoding technology, enhancing resistance to interference and allowing independent control.

3. Specifikace

Obrázek 2: Detailní view of the relay module's wiring terminals and specification label.

4. Obsah balení

Balení produktu obvykle obsahuje následující položky:

• 1 x Wireless RF Remote Control Relay Switch Module
• 2x Dálkové ovladače

5. Nastavení

The relay module and remote controls are designed for straightforward setup. Please follow these general steps:

1. Připojení napájení: Ensure the module is connected to a compatible power source. The module supports both DC 12-36V and AC 100-240V inputs. Refer to the wiring diagram on the module for correct polarity and terminal connections.
2. Zapojení zařízení: Wire the devices you wish to control (e.g., lights, motors) to the appropriate output terminals (NO, NC, COM) on the relay module. Ensure all connections are secure and insulated.
3. Párování dálkového ovladače: The system uses a learning code for pairing the remote controls with the receiver. The specific learning procedure might vary slightly, but typically involves a learning button on the receiver module.

Obrázek 3: Vnitřní view of the relay module, showing the circuit board. A learning button (often a small black button) is typically located on the board.

6. Návod k obsluze

The AK-C211008 module supports three main operating modes. The mode is typically set during the learning/pairing process. Please refer to the specific instructions provided with your module for precise mode setting and learning procedures.

6.1. Provozní režimy

• Jog (Momentary) Mode: The relay output is active only for as long as the corresponding button on the remote control is pressed. When the button is released, the relay deactivates.
• Self-Locking (Toggle) Mode: Pressing a button on the remote control once activates the corresponding relay output. Pressing the same button again deactivates the relay output.
• Režim propojení: In this mode, only one relay output can be active at a time. Pressing button 'A' activates relay 'A' and deactivates any other active relays (B, C, D). Pressing button 'B' activates relay 'B' and deactivates A, C, D, and so on.

6.2. Learning/Pairing Procedure (General)

While specific steps may vary, a common learning procedure for these modules is as follows:

1. Vymazat existující kódy: To clear all previously learned remote controls, press and hold the learning button on the receiver module for approximately 8 seconds until the indicator light flashes rapidly and then turns off. This ensures a clean slate for new pairings.
2. Vstup do výukového režimu: Briefly press the learning button on the receiver module the required number of times for your desired mode:
   
   • Stiskněte jednou for Jog (Momentary) Mode.
   • Stiskněte dvakrát for Self-Locking (Toggle) Mode.
   • Stiskněte třikrát for Interlock Mode.
   The indicator light on the module will turn on, indicating it is ready to learn.
3. Párování dálkového ovládání: While the indicator light is on, press the desired button on your remote control. The indicator light on the module will flash several times and then turn off, indicating successful pairing.
4. Testovací provoz: After pairing, test the remote control to ensure the relay operates correctly in the selected mode.

7. Údržba

• Keep the relay module and remote controls clean and dry. Avoid exposure to dust, dirt, and moisture.
• Do not expose the devices to extreme temperatures or humidity.
• If the remote control range decreases or it becomes unresponsive, replace the built-in CR2016 button cell batteries.
• Pravidelně kontrolujte kabeláž, abyste se ujistili, že je bezpečná.

8. Řešení problémů

9. Záruka a podpora

Pro informace o záruce, technickou podporu nebo servisní dotazy se prosím obraťte přímo na prodejce nebo výrobce. Uschovejte si účtenku jako doklad o koupi.