Touch Undermount Drawer Slides 12 Inch, Soft-Close Instruction Manual

Zavedení

This manual provides detailed instructions for the installation, operation, and adjustment of your Touch 12-inch soft-close undermount drawer slides. These slides are designed for concealed bottom mounting, offering a clean aesthetic with no visible hardware. They feature a soft-close mechanism for quiet operation and 3D adjustability for precise drawer alignment. Constructed from cold-rolled steel, each pair supports up to 75 lbs.

Co je v krabici

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• 2 x Drawer Slides (1 Pair)
• 2 x Lock Devices
• Mounting Screws (8 for slides, 8 for lock devices)
• Návod k použití (tento dokument)

Image: Components included in the package. Shows two drawer slides, two orange lock devices, and various screws.

Specifikace

Image: Detailed specifications table for different slide lengths, including drawer length, extension length, cabinet depth, and mounting hole distances.

Nastavení a instalace

Obecné požadavky

• Ensure drawer side panels are between 1/2 inch and 3/4 inch thick.
• For optimal fit, the inside drawer width should be the cabinet opening width minus 1-7/8 inches.

Image: Diagram detailing required clearances and dimensions for proper installation, including drawer side thickness (maximum 3/4 inch) and bottom recess.

Cabinet Type Compatibility

These slides are compatible with both face-frame and frameless cabinets.

• For Face-Frame Cabinets: Rear mounting sockets are required and sold separately.
• Pro bezrámové skříně: Rear mounting sockets are not required.

Image: Visual guide for installing slides in face-frame cabinets (requiring rear mounting sockets) and frameless cabinets (not requiring them).

Kroky instalace

1. Připravte si kabinet: Ensure the cabinet opening is clean and free of obstructions. Measure and mark the mounting positions for the slides according to the specifications and your drawer dimensions.
2. Install Cabinet Slides: Attach the cabinet portion of the slides to the inside of the cabinet using the provided screws. Ensure they are level and parallel. For face-frame cabinets, install the rear mounting sockets first, then attach the slides.
3. Připravte si zásuvku: Attach the lock devices to the underside of the drawer box, near the front, using the provided screws. Ensure they are correctly oriented.
4. Vložte zásuvku: Align the drawer with the cabinet slides and gently push it in until the lock devices engage with the slides. You should hear a click.
5. Adjust the Drawer: Use the 3D adjustment features on the lock devices to fine-tune the drawer's height, depth, and side-to-side alignment. (Refer to the 'Adjustments' section for details).
6. Testovací provoz: Open and close the drawer several times to ensure smooth movement and proper soft-close function.

Instalační video průvodce

Operating the Drawer Slides

These undermount drawer slides feature a soft-close mechanism. When closing the drawer, gently push it until the soft-close mechanism engages. The drawer will then pull itself shut quietly and smoothly, preventing slamming.

Image: A drawer fully installed with the undermount slides, demonstrating the concealed nature of the hardware.

Adjustments (3D Adjustable)

The integrated 3D adjustment feature allows for fine-tuning of the drawer front after installation. This ensures an even and precise gap around the drawer front.

• Nastavení výšky: Typically adjusted via a screw on the lock device.
• Nastavení hloubky: Adjusted via a screw or lever on the lock device.
• Seřízení ze strany na stranu: Adjusted via a screw or lever on the lock device.

Consult the specific markings on the lock devices for the exact adjustment points. After making adjustments, ensure all locking mechanisms are secure.

Obrázek: Podrobný view of the 3D lock device, showing the various adjustment points for height, front panel tilt, and side-to-side alignment.

Údržba

These drawer slides require minimal maintenance. Periodically inspect the slides for any debris or dust accumulation. Clean with a dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish or internal mechanisms. Lubrication is generally not required for the soft-close mechanism.

Odstraňování problémů

• Zásuvka se nezavírá hladce: Check for obstructions in the slide path. Ensure the soft-close mechanism is engaging correctly. Verify that the drawer is not overloaded (maximum 75 lbs).
• Drawer not aligning properly: Use the 3D adjustment features on the lock devices to correct height, depth, or side-to-side alignment.
• Drawer difficult to open/close: Ensure all mounting screws are tightened appropriately. Check if the slides are installed level and parallel.
• Drawer detaches from slides: Ensure the lock devices are fully engaged with the slides. Re-insert the drawer firmly until a click is heard.

Informace o záruce

For specific warranty details and terms, please refer to the manufacturer's official webwebu nebo se přímo obraťte na jejich zákaznickou podporu.

Zákaznická podpora

If you encounter any issues or have questions not covered in this manual, please contact Touch Cabinets Hardware customer support for assistance.