TOPXCDZ 12V COB RGB LED Strip Instruction Manual

1. Úvod

This manual provides essential information for the safe and effective use of your TOPXCDZ 12V COB RGB LED Strip. Please read these instructions carefully before installation and operation, and retain them for future reference.

The TOPXCDZ 12V COB RGB LED Strip is designed for indoor decorative lighting, offering high-density, flexible, and colorful illumination. It features 810 LEDs per meter, providing uniform light output without noticeable light spots or dark areas.

2. Bezpečnostní informace

Pro zajištění bezpečného provozu a prevenci poškození dodržujte následující bezpečnostní opatření:

• Tento produkt je určen pro pouze pro vnitřní použití (Krytí IP20). Nevystavujte vodě ani vysoké vlhkosti.
• Ensure the power supply (not included) is compatible with DC 12V and provides sufficient wattage for the strip (15-18W/M).
• Nepřipojujte LED pásek přímo k napájení ze sítě.
• Neohýbejte proužek prudce ani nepůsobte nadměrnou silou, mohlo by dojít k poškození vnitřních obvodů.
• Do not cover the LED strip with materials that could impede heat dissipation during operation.
• Uchovávejte mimo dosah dětí.
• Disconnect power before any installation, maintenance, or cleaning.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• 1x DC12V RGB COB LED Strip (5 meters)

Poznámka: A power supply and controller are není součástí dodávky a musí se zakoupit samostatně.

4. Vlastnosti produktu

• High Density: 810 LEDs per meter for uniform and bright illumination.
• Flexibilní design: Soft and flexible COB strip for versatile installation.
• Barva RGB: Capable of displaying a wide range of colors.
• Excellent Color Rendering: High Color Rendering Index (CRI >90) for accurate color representation.
• Ořezatelné: Can be cut at designated points (every 5cm) to fit specific lengths.
• Snadná instalace: Features double-sided adhesive tape for simple application on dry, flat surfaces.
• Low Light Decay: Maintains brightness over extended periods of use.

5. Specifikace

6. Nastavení a instalace

This LED strip requires a 12V DC power supply and an RGB LED controller (both sold separately) for full functionality.

1. Připravte povrch: Ensure the installation surface is clean, dry, and flat. Dust, grease, or moisture can reduce the effectiveness of the adhesive tape.
2. Změřte a nařežte (pokud je to nutné): Measure the desired length for your installation. The LED strip can be cut at designated cutting points, typically marked every 5cm. Use sharp scissors to ensure a clean cut. Neřežte v žádném jiném bodě.
   

   Image: The 5-meter COB RGB LED strip unrolled, showing the flexible design and the 4-pin connector for power and control.

3. Připojení k ovladači: Connect the 4-pin connector of the LED strip to the corresponding output port on your RGB LED controller. Ensure the pins are aligned correctly (typically marked R, G, B, +12V).
4. Connect Controller to Power Supply: Connect your RGB LED controller to a compatible 12V DC power supply. Ensure the power supply's wattage meets or exceeds the total wattage required by the LED strip (5 meters * 18W/M = 90W maximum).
5. Test funkčnosti: Before final adhesion, temporarily power on the system to ensure the strip lights up and responds to the controller as expected.
6. Přilepte proužek: Carefully peel off the backing from the double-sided adhesive tape on the back of the LED strip. Press the strip firmly onto the prepared surface, working in sections to avoid bubbles or misalignment.

Image: The COB RGB LED strip coiled on its reel, illustrating its flexible nature before installation.

7. Návod k obsluze

Once installed and connected to a power supply and controller, operate the LED strip using your chosen RGB LED controller (e.g., remote control, mobile app, or control box).

• Zapnutí/vypnutí: Use the power button on your controller to turn the LED strip on or off.
• Výběr barvy: Select desired colors using the color palette or preset color buttons on your controller. The strip supports RGB (Red, Green, Blue) color mixing.
  

  Image: The LED strip illuminated with blue light, demonstrating one of its color capabilities.

  

  Image: The LED strip illuminated with red light, showcasindalší barevnou variantu.

  

  Image: The LED strip illuminated with green light, illustrating its ability to produce various colors.

• Nastavení jasu: Adjust the brightness level using the dimmer controls on your controller.
• Výběr režimu: Many controllers offer various flashing, fading, or music-sync modes. Refer to your controller's manual for specific instructions on selecting and customizing these modes.

8. Údržba

The TOPXCDZ 12V COB RGB LED Strip requires minimal maintenance.

• Čištění: Ensure the power is disconnected before cleaning. Gently wipe the surface of the LED strip with a soft, dry, or slightly damp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
• Inspekce: Periodically inspect the strip for any signs of damage, such as cuts, frayed wires, or loose connections. Address any issues promptly.
• Skladování: Pokud proužek skladujete, ujistěte se, že je volně srolovaný a uchovávejte jej na suchém a chladném místě mimo dosah přímého slunečního záření.

9. Řešení problémů

10. Záruka a podpora

For warranty information or technical support, please contact TOPXCDZ customer service through the retailer where the product was purchased. Please have your purchase receipt and product model number (4e06dd16-f82d-4b4c-8e5c-9dc6dc5c7f86) available.

For additional resources or frequently asked questions, please visit the official TOPXCDZ support webstránky (je -li k dispozici).