RESUXI JM114
RESUXI Professional Replacement Clipper Blades
Model: JM114
Zavedení
Thank you for choosing RESUXI Professional Replacement Clipper Blades. These precision-engineered blades are designed to provide a smooth and efficient cutting experience, serving as an ideal replacement for worn or damaged blades on compatible hair clippers. This manual provides essential information on product features, compatibility, installation, maintenance, and troubleshooting to ensure optimal performance and longevity of your new blades.
Vlastnosti produktu
- High Carbon Steel Construction: Engineered for durability and long-lasting sharpness.
- Precision 2-Hole Design: Ensures secure and accurate fitting on compatible clippers.
- Adjustable and Detachable: Designed for easy replacement and maintenance.
- Fade Blade Type: Optimized for smooth fading and blending.
- Profesionální stupeň: Suitable for both professional and home use.
Kompatibilita
These replacement blades are designed to be compatible with a range of professional hair clippers. Please verify your clipper model against the list below:
Compatible Wahl Clipper Models:
- Wahl 5-Star Senior
- Wahl Magic Clip
- Wahl Reflections Senior
Compatible RESUXI Clipper Models:
- JM2022
- JM2021
- JM106
- JM104
- JM101
- JM107
Nastavení a instalace
Follow these steps to safely replace your clipper blades:
- Step 1: Unscrew the Old Blade. Using a suitable screwdriver, carefully unscrew the two screws holding the existing blade assembly to the clipper body. Set the screws aside in a safe place.
- Step 2: Remove and Replace. Gently remove the old blade assembly. Position the new RESUXI replacement blade set onto the clipper, ensuring the holes align correctly with the screw posts.
- Step 3: Adjust Position. Before fully tightening, slightly adjust the position of the new blade. Ensure the top blade (cutter) is aligned perfectly with the bottom blade (comb) to prevent skin nicks and ensure an even cut. The top blade should be slightly behind the bottom blade.
- Step 4: Secure the Blade. Once the blade is properly aligned, carefully tighten the two screws. Do not overtighten, as this can damage the blade or clipper. Test the clipper by turning it on briefly to ensure smooth operation.
Návod k obsluze
Once installed, your new RESUXI blades are ready for use with your compatible clipper. For optimal performance and safety:
- Ensure the clipper is clean and free of hair debris before each use.
- Apply a few drops of clipper oil to the blades before and after each use to maintain sharpness and reduce friction.
- Always use the appropriate guard size for the desired hair length.
- Move the clipper smoothly and steadily through the hair, avoiding excessive pressure.
- Regularly check blade alignment, especially after cleaning or if the clipper is dropped.
Údržba
Proper maintenance is crucial for extending the life and performance of your clipper blades:
- Čištění: After each use, brush off any loose hair from the blades using a small cleaning brush. For a deeper clean, you may detach the blades and rinse them under running water (ensure the clipper body does not get wet). Dry thoroughly immediately.
- Olejování: Apply 1-2 drops of clipper oil to the teeth of the blades and along the friction points where the two blades meet. Turn the clipper on for a few seconds to distribute the oil. This reduces heat, friction, and wear.
- Skladování: Store your clipper with the blades attached in a clean, dry place, away from moisture and extreme temperatures.
- Inspekce: Periodically inspect the blades for any signs of wear, damage, or dullness. Replace blades if they show significant wear or if cutting performance degrades.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Čepele tahající nebo lámající vlasy | Dull blades, improper alignment, lack of oil, hair buildup. | Clean and oil blades. Check blade alignment and adjust if necessary. If blades are old or damaged, replace them. |
| Nerovnoměrné řezání | Improper blade alignment, damaged blade teeth. | Re-align blades carefully. Inspect for bent or broken teeth; replace blades if damaged. |
| Blades getting hot quickly | Lack of lubrication, excessive friction. | Apply clipper oil generously to the blades. Ensure blades are clean and free of debris. |
| Blades making excessive noise | Loose screws, lack of oil, foreign object. | Tighten blade screws (do not overtighten). Oil blades. Check for any trapped hair or debris. |
Specifikace
- Značka: RESUXI
- Číslo modelu: JM114
- Materiál: Vysoce uhlíková ocel
- Typ čepele: Fade Blade, 2-Hole Design
- Rozměry balení: 4.96 x 3.62 x 0.35 palce
- Hmotnost položky: 1.76 unce
- Doporučená použití: Clipping, Professional, Trimming
- Typ vlasů: Vše
Záruka a podpora
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. For product-specific inquiries or support, please refer to the retailer or manufacturer's official webNejnovější kontaktní informace a podrobnosti o záruce naleznete na webových stránkách.
As replacement parts, these blades typically fall under the warranty of the original clipper or a limited warranty for manufacturing defects. Please retain your proof of purchase for any warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.