Uživatelská příručka k laserovému gravírovacímu a řezacímu stroji SCULPFUN S30 5.5 W

1. Důležité bezpečnostní informace

Please read all safety instructions carefully before operating the SCULPFUN S30 laser engraver. Failure to follow these instructions may result in injury or damage to the device.

• Bezpečnost laseru: This device uses a Class 2 laser. Never look directly into the laser beam. Always wear the provided laser safety glasses during operation.
• Ochrana očí: Always wear appropriate laser safety glasses to protect your eyes from direct or reflected laser light.
• Větrání: Operate the laser engraver in a well-ventilated area to avoid inhaling fumes and smoke produced during engraving or cutting.
• Bezpečnost materiálu: Gravírujte nebo řežte pouze materiály, které jsou označeny jako bezpečné pro laserové zpracování. Vyhněte se vysoce reflexním, hořlavým nebo neznámým materiálům.
• Nebezpečí požáru: The laser can ignite flammable materials. Do not leave the machine unattended during operation. Keep a fire extinguisher nearby.
• Děti a domácí mazlíčci: Keep children and pets away from the operating area. This device is not a toy.
• Nouzové zastavení: Seznamte se s umístěním a obsluhou tlačítka nouzového zastavení.

2. Obsah balení

Verify that all components are present in your package before assembly. If any parts are missing or damaged, please contact customer support.

Image: All components included in the SCULPFUN S30 package, laid out for inspection.

• Laser Engraver Frame Assembly
• S9 Laser Module (5.5W)
• Napájecí adaptér a kabel
• USB kabel
• Laserové ochranné brýle
• Tool Kit (wrenches, hex keys)
• Air Assist Nozzle (if included in your specific model)
• Test Materials (wood, metal sheet)
• Uživatelská příručka (tento dokument)

3. Průvodce nastavením

Follow these general steps to assemble your SCULPFUN S30 laser engraver. Refer to the detailed assembly instructions provided in the box for specific diagrams and fastener details.

Image: The fully assembled SCULPFUN S30 laser engraver, ready for operation.

1. Rozbalte komponenty: Opatrně vyjměte všechny díly z obalu a zkontrolujte je podle seznamu obsahu balení.
2. Sestavte rám: Připojte hliníkový profesionálfiles to form the main frame of the engraver. Ensure all screws are tightened securely.
3. Install X and Y Axis: Mount the X-axis and Y-axis gantry components onto the frame. Ensure smooth movement along both axes.
4. Mount Laser Module: Attach the S9 laser module to the X-axis carriage. Ensure it is firmly secured and the laser focus is correctly set (refer to specific instructions for focusing).
5. Připojení kabeláže: Connect the motor cables, limit switch cables, and laser module cable to the control board. Double-check all connections.
6. Připojení napájení: Připojte napájecí adaptér k gravírce a poté do vhodné elektrické zásuvky.
7. Instalace softwaru: Install the recommended laser control software (e.g., LaserGRBL, LightBurn) on your computer. Drivers may be required.

4. Návod k obsluze

Tato část poskytuje obecný závěrview of operating your SCULPFUN S30. Detailed software-specific instructions can be found in the respective software manuals.

Obrázek: Různé examples of items that can be engraved with the SCULPFUN S30, including wood, metal, and leather.

1. Připravte pracovní prostor: Ensure your workspace is clean, well-ventilated, and free of flammable materials. Place the material to be engraved or cut on the work surface.
2. Připojení k počítači: Connect the engraver to your computer via the USB cable.
3. Zapnutí: Turn on the power switch on the engraver.
4. Spustit software: Open your chosen laser control software (e.g., LaserGRBL, LightBurn).
5. Návrh zatížení: Import your desired image or design file do softwaru.
6. Upravit nastavení: Set the laser power, speed, and number of passes according to your material and desired effect. Refer to material test guides for optimal settings.
7. Zaostřovací laser: Manually adjust the laser module height to achieve the smallest possible laser spot on the material surface. The S9 laser module features advanced beam shaping technology for a finer spot.


Image: Diagram illustrating the S9 laser's beam shaping technology, which creates a thinner, higher energy density beam (0.06mm) compared to ordinary square lasers (0.23mm).

8. Materiál pozice: Use the software to jog the laser head and confirm the engraving area on your material.
9. Zahájení provozu: Ensure you are wearing safety glasses. Initiate the engraving or cutting process from the software. Monitor the process closely.
10. Vypnout: Once complete, power off the engraver and disconnect it from the computer.

5. Údržba

Regular maintenance ensures optimal performance and extends the lifespan of your SCULPFUN S30.

• Čistá čočka: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain laser power and precision.
• Čištění kolejnic a kol: Keep the guide rails and wheels free of dust and debris to ensure smooth movement of the laser head. Use a dry cloth or compressed air.
• Namažte pohyblivé části: Apply a small amount of lubricant to the guide rails and lead screws as needed to reduce friction.
• Zkontrolujte řemeny: Inspect the timing belts for tension and wear. Adjust or replace if necessary.
• Laser Module Lifespan: The S9 laser module is designed for a long service life of approximately 15,000 hours. Proper maintenance can help achieve this.


Image: Close-up of the SCULPFUN S9 laser module, highlighting its sealed, durable design and 15,000-hour service life.

6. Řešení problémů

If you encounter issues with your SCULPFUN S30, refer to the following common problems and solutions:

• Žádný laserový výstup:
  • Zkontrolujte, zda je laserový modul správně připojen a napájen.
  • Ensure the laser safety key (if present) is in the 'on' position.
  • Ověřte nastavení výkonu laseru v softwaru.
• Engraving/Cutting Not Deep Enough:
  • Check laser focus. The laser spot should be as small as possible.
  • Increase laser power or reduce engraving speed in the software.
  • Increase the number of passes.
  • Ensure the material is suitable for laser processing. The S30 can cut up to 15mm wood, 10mm plywood, and 10mm acrylic.


Image: Demonstrates the cutting capabilities of the SCULPFUN S30, showing successful cuts through 15mm wood, 10mm plywood, and 10mm acrylic.

• Zařízení se nepřipojuje k počítači:
  • Ověřte připojení kabelu USB.
  • Check if the correct COM port is selected in the software.
  • Reinstall USB drivers if necessary.
• Nepřesné gravírování/řezání:
  • Check for loose belts or pulleys.
  • Ensure the frame is rigid and not wobbling.
  • Verify material is securely placed and not shifting.

For further assistance, please contact SCULPFUN customer support.

7. Specifikace

8. Záruka a podpora

SCULPFUN products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or visit the official SCULPFUN webmísto.

If you require technical support, have questions about operation, or need assistance with troubleshooting, please contact SCULPFUN customer service through their official channels. Provide your product model (S30) and purchase details for faster service.

For the latest information and resources, please visit the official SCULPFUN webmísto: www.sculpfun.com