HP Smart Tank 670 All-in-One Printer Instruction Manual

1. Úvod

This manual provides detailed instructions for setting up, operating, and maintaining your HP Smart Tank 670 All-in-One printer. The HP Smart Tank 670 is a versatile device designed for printing, scanning, and copying, featuring integrated ink tanks, automatic duplex printing, and wireless connectivity options.

For optimal performance and longevity of your printer, please read these instructions carefully before use.

2. Nastavení

2.1 Vybalení a počáteční příprava

Carefully remove the printer from its packaging. Ensure all protective tapes and cardboard inserts are removed from the exterior and interior of the printer. Place the printer on a stable, level surface where it will be used.

Obrázek 1: Přední strana view of the HP Smart Tank 670 printer with paper in the input tray.

Obrázek 2: Přední strana view of the HP Smart Tank 670 printer with the paper input tray closed.

Obrázek 3: Zadní view of the HP Smart Tank 670 printer.

2.2 Připojení k napájení a počáteční zapnutí

Connect the power cord to the rear of the printer and then plug the other end into an electrical outlet. Press the power button to turn on the printer. Do not connect the USB cable at this time; the connection to the computer is established during software installation.

2.3 Plnění inkoustových zásobníků

Lift the ink access door and open the tank covers. Carefully open each ink bottle, matching the color to the corresponding tank. Invert the bottle over the tank nozzle and allow the ink to drain until the tank is full. Do not squeeze the bottle. If the bottle does not start draining, remove it and reinsert it onto the tank. Close the tank covers and the ink access door once all tanks are filled.

2.4 Instalace tiskových hlav

After filling the ink tanks, lift the ink access door again and wait for the carriage to move to the center. Press the blue button to open the printhead cover. Remove and discard the orange guard. Carefully remove the printheads from their packaging, removing the orange cap and protective tape. Insert the black and tri-color printheads into their associated slots. Close the printhead cover and then the ink access door.

2.5 Instalace softwaru

Download the HP Smart app to your mobile device or computer. Ensure your device's operating system is up to date. Enable Bluetooth and location services on your mobile device if using it for setup. Open the app and follow the on-screen instructions to connect the printer to your wireless network and complete the setup. The USB cable should only be connected when prompted by the software.

3. Obsluha tiskárny

The HP Smart Tank 670 offers convenient all-in-one functionality for printing, scanning, and copying. Its intuitive 2-line LCD and smart guided buttons facilitate easy navigation and access to key functions.

3.1 Tisk

Load paper into the 60-sheet input tray. Use the HP Smart app or your computer's print dialogue to send print jobs. The printer supports automatic two-sided (duplex) printing, saving paper and time. It delivers sharp black-and-white prints at up to 12 ppm and vivid color prints at up to 7 ppm.

3.2 Skenování a kopírování

Place documents on the flatbed scanner. Use the HP Smart app or the printer's control panel to initiate scanning or copying. The printer supports various media sizes including A4, A5, A6, B5 (JIS), and envelopes.

Obrázek 4: Nahoře view ovládacího panelu tiskárny.

Figure 5: Close-up of the printer's control panel.

4. Údržba

4.1 Doplňování inkoustu

The integrated ink tanks feature an automatic ink sensor to monitor ink levels. When ink levels are low, refill the tanks using genuine HP GT53XL Black and HP GT52 Cyan, Magenta, and Yellow ink bottles. Always match the ink bottle color to the corresponding tank. Refer to section 2.3 for detailed ink refilling instructions.

4.2 Čištění

Regularly clean the exterior of the printer with a soft, lint-free cloth. For print quality issues, use the printer's maintenance tools via the HP Smart app or control panel to clean printheads or align cartridges.

5. Řešení problémů

5.1 Běžné problémy

• Problémy s připojením: Ensure your printer is connected to the correct Wi-Fi network. Check router status and printer's Wi-Fi indicator. Restarting both the printer and router can often resolve connectivity issues.
• Problémy s kvalitou tisku: If prints are faded, streaky, or have incorrect colors, perform a printhead cleaning or alignment through the HP Smart app or printer settings. Ensure genuine HP ink is used and ink tanks are adequately filled.
• Zaseknutý papír: Follow on-screen prompts or consult the HP Smart app for instructions on clearing paper jams. Always remove paper carefully to avoid tearing.
• Printhead Failure: If a 'Printhead Failure' message appears, ensure printheads are correctly installed and free from protective tape on contacts. If the issue persists, contact HP Support.

5.2 Podpora HP

Pro další pomoc navštivte stránku Podpora HP webmísto or contact HP customer service. Have your printer's model number (HP Smart Tank 670) and serial number ready.

6. Specifikace

7. Záruka a podpora

7.1 Informace o záruce

The HP Smart Tank 670 printer is backed by a 1-year limited warranty. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty flyers included in your product packaging.

7.2 Zákaznická podpora

HP provides 12x7 voice support and 24x7 chat assistance. For technical support, troubleshooting, or warranty claims, please visit the official HP support website or contact their customer service channels. Ensure you have your product model and serial number available for faster service.