Čalouněný rám postele Keyluv s LED osvětlením a čelem, model 068, návod k použití

1. Úvod

Thank you for choosing the Keyluv Upholstered Full LED Bed Frame. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed frame. Please read these instructions thoroughly before beginning assembly and retain them for future reference.

Image 1.1: Keyluv Upholstered Full LED Bed Frame.

2. Bezpečnostní informace

Dodržujte prosím následující bezpečnostní opatření, abyste předešli zranění nebo poškození produktu:

• Pozor: Nízký profíkfile design of this bed frame may pose a risk of injury when getting in or out of bed. Exercise care during use.
• Nepřekračujte maximální nosnost 900 liber.
• Během montáže uchovávejte všechny malé díly a obalové materiály mimo dosah dětí.
• Assemble the bed frame on a soft, clean surface to prevent scratches or damage.
• Ensure all screws, bolts, and connections are securely tightened before using the bed frame. Periodically check and re-tighten connections as needed.
• Nestůjte ani neskákejte na rám postele.

3. Obsah balení

Před zahájením montáže ověřte, zda jsou všechny níže uvedené komponenty přítomny a nepoškozené. Pokud některé díly chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

• Čelo
• Stupačka
• Side Rails (Left & Right)
• Středový nosník
• Dřevěné lamely
• Komponenty kovového rámu
• Sada hardwaru (šrouby, matice, podložky, imbusový klíč)
• LED světelný pásek
• LED dálkové ovládání
• Návod k montáži

Obrázek 3.1: Konecview komponentů rámu postele.

4. Pokyny k instalaci a montáži

This bed frame requires assembly. Detailed step-by-step instructions and all necessary tools are included in the product packaging. Please follow the provided manual carefully for proper assembly. It is recommended to have two people for assembly.

1. Vybalte všechny součásti a rozložte je na čistý, měkký povrch.
2. Identify all parts according to the parts list in the included manual.
3. Follow the sequential steps in the assembly manual to connect the headboard, footboard, and side rails.
4. Install the center support beam and then evenly space and secure the wooden slats. Ensure all slats are firmly attached to provide adequate mattress support.
5. Once the frame is assembled, install the LED light strip into the designated channel on the headboard.
6. Ensure all connections are tight before placing your mattress on the frame.

Image 4.1: Bed frame with wooden slats providing mattress support.

5. Návod k obsluze

5.1 LED osvětlovací systém

The integrated LED lighting system offers 16 color options and 4 dynamic modes to customize your room's ambiance. It can be controlled via the included remote control or a dedicated Bluetooth application.

• Dálkové ovládání: Use the provided remote to power the lights on/off, change colors, adjust brightness, and select dynamic modes.
• Ovládání Bluetooth aplikací: Download the compatible Bluetooth application (refer to the included manual for app name and QR code). Connect your device to the LED lights via Bluetooth to access advanced features such as:
• Režim časování: Schedule automatic on/off times for the lights.
• Režim stylu: Choose from various pre-set lighting effects.
• Barevný režim: Select specific colors from a wider spectrum.
• Hudební režim: Lights synchronize with music beats.
• Režim mikrofonu: Lights react to ambient sounds detected by your device's microphone.

Image 5.1: LED remote control and Bluetooth application interface for light customization.

Image 5.2: Auto timing mode allows scheduling LED light operation.

5.2 Nastavitelné čelo postele

The headboard features an adjustable mechanism, allowing you to recline it to a comfortable angle for reading or lounging. Gently push or pull the top section of the headboard to adjust its position.

Image 5.3: The headboard can be adjusted for personalized comfort.

6. Údržba

Správná péče prodlouží životnost a vzhled rámu vaší postele.

• Čalounění z umělé kůže: Výrobce doporučuje Pouze chemické čištění for the faux leather finish. For general cleaning, wipe the surface with a soft, slightly damp cloth. Avoid using abrasive cleaners, harsh chemicals, or excessive moisture, as these can damage the material.
• Rám: Periodically check all bolts and screws and re-tighten them as necessary to maintain stability.
• LED světla: Ensure the LED strip and connections are free from dust and debris.

Image 6.1: High-quality faux leather material.

7. Řešení problémů

If you encounter issues with your bed frame, refer to the following common problems and solutions:

• LED světla nefungují:
  • Check if the power adapter is securely plugged into a working outlet and the LED strip.
  • Ensure the remote control battery is functional and correctly inserted.
  • If using the Bluetooth app, verify that your device's Bluetooth is enabled and properly connected to the LED lights.
• Bed Frame Instability or Squeaking:
  • Re-tighten all screws, bolts, and connections throughout the frame.
  • Ensure all wooden slats are correctly positioned and securely fastened to the frame.
  • Verify that the center support beam is properly installed and making firm contact with the floor.
• Mattress Does Not Fit Properly:
  • Confirm that your mattress size matches the bed frame size (Full).
  • Ensure the mattress thickness is within the recommended 10-12 inch range for optimal fit with the headboard.
• Chybějící nebo poškozené díly:
  • If you discover any missing or damaged parts upon unboxing, do not proceed with assembly. Contact Keyluv customer support immediately for assistance.

8. Specifikace

Image 8.1: Keyluv bed frame dimensions.

9. Záruka a podpora

For product support, warranty information, or to report missing/damaged parts, please contact Keyluv customer service. Refer to your purchase documentation for specific contact details and warranty terms. Keyluv is committed to providing quality products and support.