Digitus DN-10130-1

DIGITUS Gigabit Ethernet Network Card User Manual

Model: DN-10130-1

Zavedení

This manual provides comprehensive instructions for the installation, operation, and maintenance of your DIGITUS Gigabit Ethernet Network Card. This PCI Express network card is designed to equip your PC with an additional Gigabit Ethernet port, enabling high-speed data transfer up to 1000 Mbps over existing network cabling. It includes a low-profile slot panel, making it suitable for various computer chassis sizes.

DIGITUS Gigabit Ethernet Network Card

Figure 1: DIGITUS Gigabit Ethernet Network Card (Main View)
Tento obrázek ukazuje celkový view of the DIGITUS Gigabit Ethernet Network Card, highlighting its PCI Express interface and the RJ45 port.

Obsah balení

Before proceeding with the installation, please verify that all components are present in the package:

  • Síťová karta Gigabit Ethernet PCI Express
  • Low Profile Deska štěrbiny
  • Rychlý průvodce
  • Support CD-ROM (containing drivers and utilities)
DIGITUS Network Card with Low Profile Konzola

Figure 2: Network Card with Included Low Profile Konzola
This image displays the network card alongside the additional low-profile bracket, which can be used for installation in smaller computer cases.

Nastavení a instalace

Follow these steps carefully to install your network card:

  1. Vypnutí a odpojení: Úplně vypněte počítač a odpojte napájecí kabel ze zásuvky.
  2. Otevřete počítačovou skříň: Pro přístup k základní desce sejměte boční panel skříně počítače.
  3. Vyhledejte slot PCI Express: Identify an available PCI Express (PCIe) slot on your motherboard. The card requires a PCIe x1 slot or larger (e.g., x4, x8, x16).
  4. Odstraňte kryt slotu: Carefully remove the metal slot cover from the back of your computer case corresponding to the chosen PCIe slot. If installing in a small form factor PC, you may need to replace the standard bracket on the network card with the included low-profile Závorka.
  5. Vložení síťové karty: Align the network card with the PCIe slot and press it firmly and evenly until it is securely seated. Ensure the bracket is flush with the back of the case.
  6. Bezpečná karta: Secure the network card with the screw or latch mechanism provided by your computer case.
  7. Uzavření případu a opětovné připojení: Replace the computer case side panel and reconnect all cables, including the power cable.
  8. Zapnutí a instalace ovladačů: Power on your computer. Once the operating system loads, insert the provided Support CD-ROM to install the necessary drivers. Alternatively, you can download the latest drivers from the Digitus official webwebu. Dokončete instalaci ovladače podle pokynů na obrazovce.
PCIe Connector of Network Card

Figure 3: PCIe Connector Detail
Tento obrázek nabízí detailní záběr view of the PCI Express connector on the network card, which plugs into the motherboard.

Návod k obsluze

Once the network card is physically installed and drivers are successfully loaded, you can begin using it:

  1. Připojení ethernetového kabelu: Plug a standard RJ45 Ethernet cable from your network router, switch, or modem into the RJ45 port on the newly installed network card.
  2. Ověřit připojení: Observe the LED indicators on the RJ45 port. Typically, one LED indicates link activity (data transfer) and the other indicates connection speed (e.g., green for Gigabit, amber for 100 Mbps). Refer to the image below for LED locations.
  3. Konfigurace sítě: Your operating system should automatically detect the new network connection. You may need to configure network settings (e.g., IP address, DNS) if your network does not use DHCP.
  4. Test připojení: Otevřete a web browser or use network diagnostic tools to confirm internet access and network connectivity.
RJ45 Port and LED Indicators

Figure 4: RJ45 Port with LED Indicators
This image shows the RJ45 Ethernet port on the network card, along with the two LED indicators that provide visual feedback on network link status and activity.

Údržba

The DIGITUS Gigabit Ethernet Network Card is designed for reliable operation with minimal maintenance. However, consider the following:

  • Aktualizace ovladačů: Periodically check the Digitus official website for updated drivers. Keeping drivers current can improve performance and resolve compatibility issues.
  • Fyzická kontrola: If you experience network issues, a physical inspection of the card and cable connections can be helpful. Ensure the card is securely seated in its PCIe slot and the Ethernet cable is firmly connected.
  • Odstranění prachu: Over time, dust can accumulate inside your computer case. If necessary, carefully clean the area around the network card using compressed air to prevent overheating. Ensure the computer is powered off and unplugged before cleaning.

Odstraňování problémů

If you encounter issues with your network card, refer to the following troubleshooting tips:

  • Žádné síťové připojení:
    • Ensure the Ethernet cable is securely connected to both the network card and your router/switch.
    • Ověřte, zda je síťová karta správně usazena ve slotu PCIe.
    • Check if the network card drivers are correctly installed in your operating system's Device Manager. Reinstall drivers if necessary.
    • Test with a different Ethernet cable or port on your router/switch.
  • Pomalá rychlost sítě:
    • Ensure your router/switch supports Gigabit Ethernet (1000 Mbps).
    • Verify that the Ethernet cable is a Cat5e or Cat6 cable, suitable for Gigabit speeds.
    • Check for updated drivers for the network card.
    • Confirm that your operating system's network settings are configured for full duplex and Gigabit speed (if applicable).
  • Problémy s instalací ovladačů:
    • Ensure you are installing the correct drivers for your operating system version (e.g., Windows 10, 64-bit).
    • Během instalace ovladače dočasně deaktivujte antivirový software, pokud vám ruší práci.
    • Try installing drivers in compatibility mode if experiencing issues on newer operating systems.

Specifikace

FunkceDetail
ZnačkaDigitus
Číslo modeluDN-10130-1
Hardwarové rozhraníPCI Express (PCIe x1), Ethernet
Data Link ProtocolGigabit Ethernet (10/100/1000 Mbps)
Rychlost přenosu dat1000 megabitů za sekundu
Kompatibilní zařízeníStolní počítače
Čipová sadaRealtek RTL8111H
Rozměry produktu5.51 x 7.87 x 1.38 palce
Hmotnost položky0.035 unce (přibližně 1 gramů)
BarvaČerný

Záruka a podpora

DIGITUS products are designed for quality and reliability. This product comes with a standard limited warranty. Please refer to the warranty information provided on the Support CD-ROM or the official Digitus webkonkrétní podmínky.

For technical support, driver downloads, or further assistance, please visit the official Digitus support website or refer to the contact information provided in the Quick Start Guide included with your product. The included Support CD-ROM also contains drivers and additional resources.

EU Spare Part Availability Duration: 1 Year

© 2024 Digitus. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.