Uživatelská příručka k 3D tiskárně Artillery Hornet

1. Úvod

Thank you for choosing the Artillery Hornet 3D Printer. This manual provides essential information for the safe and efficient operation of your new 3D printer. Please read this manual thoroughly before operating the device to ensure proper setup, usage, and maintenance. The Artillery Hornet is designed for ease of use, featuring a highly integrated structure and 95% pre-assembly for quick setup.

Figure 1.1: The Artillery Hornet 3D Printer, showcasing its compact and integrated design.

2. Bezpečnostní pokyny

Vždy dodržujte následující bezpečnostní pokyny, abyste předešli zranění nebo poškození tiskárny:

• Napájení: Use only the specified power adapter. Ensure the power outlet is properly grounded.
• Provozní prostředí: Operate the printer in a well-ventilated area, away from flammable materials, direct sunlight, and excessive humidity. Maintain a stable room temperature.
• Horké povrchy: The print nozzle and print bed can reach high temperatures. Avoid touching these components during operation or immediately after use. Allow them to cool down completely before handling.
• Pohyblivé části: Během provozu držte ruce, vlasy a volné oblečení v dostatečné vzdálenosti od pohyblivých částí, abyste zabránili jejich zamotání.
• Manipulace s filamentem: Filament skladujte na suchém místě, abyste zabránili absorpci vlhkosti, která může ovlivnit kvalitu tisku.
• Děti a domácí mazlíčci: Uchovávejte tiskárnu mimo dosah dětí a domácích zvířat. Pokud jsou v přítomnosti dětí, je nutný dohled dospělé osoby.
• Nouzové vypnutí: Familiarize yourself with the location of the power switch for quick shutdown in case of an emergency.

3. Obsah balení

Upon unpacking, please verify that all components are present and undamaged. Due to the 95% pre-assembled design, the number of loose parts is minimal.

• Artillery Hornet 3D Printer (Main Unit)
• Napájecí kabel
• Držák vlákna
• USB kabel
• Tool Kit (e.g., wrenches, screwdrivers, nozzle cleaning needle)
• Sample vlákno
• SD Card / USB Drive (with software and test models)
• Uživatelská příručka (tento dokument)

4. Nastavení

The Artillery Hornet is designed for quick assembly, with 95% of the printer pre-assembled. Follow these steps to complete the setup:

1. Rozbalení: Carefully remove the printer and all accessories from the packaging. Retain the packaging for future transport or storage.
2. Sestava základny a portálu: The main gantry structure is largely pre-assembled. Attach the gantry to the base unit using the provided screws. Ensure it is securely fastened.
   

   Obrázek 4.1: Přední strana view of the printer, showing the integrated base and gantry structure.

3. Připojit kabely: Connect the hotend and motor cables to their respective ports. Ensure all connections are firm and correct. Refer to the labels on the cables and ports.
   

   Figure 4.2: Detail of the hotend and extruder, showing cable connections.
4. Instalace držáku filamentu: Mount the filament holder onto the designated slot on the printer.
5. Připojení napájení: Connect the power cable to the printer's power input and then to a grounded electrical outlet. Ensure the power switch is in the OFF position before connecting.
   

   Obrázek 4.3: Zadní view of the printer base, highlighting the power input and switch.

6. Leveling the Print Bed: The Artillery Hornet features a tempered glass print bed. While often pre-leveled, it's crucial to verify and adjust if necessary for optimal first layer adhesion.
   • Zapněte tiskárnu.
   • Navigate to the "Leveling" or "Prepare" menu on the LCD screen.
   • Move the nozzle to each corner of the print bed and adjust the leveling knobs underneath the bed until a piece of paper (standard printer paper) can slide with slight friction between the nozzle and the bed.
   • Repeat for all four corners and the center until consistent.

5. Návod k obsluze

5.1. Software Installation (Slicer)

To prepare 3D models for printing, you will need a slicer software. Popular options include Cura, PrusaSlicer, or Simplify3D. An SD card or USB drive with a recommended slicer profile might be included with your printer. Install the software on your computer and configure it for the Artillery Hornet.

• Install the slicer software from the provided SD card or download the latest version online.
• Add a new printer and select "Artillery Hornet" if available, or configure a custom FDM printer with the following build volume: 220 x 220 x 250 mm.
• Import the recommended printer profile (if provided) or configure basic settings like nozzle diameter (0.4mm), filament diameter (1.75mm), and retraction settings.

5.2. Vložení vlákna

Follow these steps to load filament into your printer:

1. Umístěte cívku s filamentem na držák filamentu.
2. Preheat the nozzle to the recommended temperature for your filament type (e.g., 200-210°C for PLA). You can do this via the printer's LCD menu (Prepare > Preheat PLA/ABS).
3. Vložte filament do vstupního otvoru extruderu.
4. Gently push the filament until it engages with the extruder gears.
5. Use the "Extrude" or "Load Filament" option from the printer's menu to feed the filament through the hotend until molten plastic comes out of the nozzle. This purges any old filament and ensures a smooth flow.

5.3. Zahájení tisku

Once your model is sliced and filament is loaded, you can start printing:

1. Uložení rozřezaného G-kódu file to an SD card or USB drive.
2. Insert the SD card/USB drive into the printer's slot.
3. Navigate to the "Print from SD" or "Print" menu on the LCD screen.
4. Vyberte si svůj G-kód file ze seznamu.
5. The printer will begin heating the bed and nozzle, then start the print. Monitor the first layer to ensure proper adhesion.

6. Údržba

Regular maintenance ensures the longevity and optimal performance of your Artillery Hornet 3D Printer:

• Vyčistěte tiskovou podložku: After each print, allow the bed to cool and carefully remove the printed object. Clean the glass bed with isopropyl alcohol to remove any residue, ensuring good adhesion for future prints.
• Vyčistěte trysku: Periodically clean the exterior of the nozzle with a brass brush to remove any accumulated plastic. If the nozzle is clogged, use the provided cleaning needle to clear the obstruction while the nozzle is hot.
• Namažte pohyblivé části: Pro zajištění plynulého pohybu naneste každé několik měsíců na vodicí šroub osy Z malé množství lithiového maziva nebo podobného maziva a vyhlaďte tyče.
• Zkontrolujte řemeny: Ensure the X and Y axis belts are properly tensioned. They should be taut but not overly tight. Adjust if necessary.
• Zkontrolujte kabely: Regularly check all cables for wear, fraying, or loose connections.
• Aktualizace firmwaru: Zkontrolujte oficiální dělostřelectvo website for any available firmware updates. Follow the instructions carefully if updating.

7. Řešení problémů

Tato část se zabývá běžnými problémy, se kterými se můžete setkat, a jejich možnými řešeními.

8. Specifikace

Key technical specifications for the Artillery Hornet 3D Printer:

9. Záruka a podpora

For warranty information, technical support, or spare parts inquiries, please refer to the official Artillery webnebo se obraťte na prodejce. Uschovejte si účtenku jako doklad o koupi.

Online zdroje:

• Artillery Official Webmísto (for product information, drivers, and firmware)
• Stránka produktu na Amazon.com.be