Herdio 6.5palcové Bluetooth stropní reproduktory s možností zabudování do zdi Ampdoživotní

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Amplifier. This system is designed to deliver high-fidelity audio for various indoor environments, including home theaters, bathrooms, living rooms, kitchens, and offices. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

Obsah balení

Ověřte, zda jsou v balení obsaženy všechny níže uvedené položky:

• 1x Wall Mount Bluetooth Ampdoživotní
• Síťový adaptér 1x
• 2x šrouby
• 2x 6.5-inch In-Ceiling Speakers
• 2x Speaker Wires
• 2x User Manuals (one for amplifier, one for speakers)

Nastavení

This section guides you through the physical installation and wiring of your Herdio ceiling speaker system.

1. Ampživější instalace

Vnitřní stěna amplifier is designed for flush mounting in a standard wall plate size. Ensure you have appropriate wiring access before proceeding.

1. Připravte zeď: Use the provided template (if applicable) to mark and cut an opening in the wall for the ampživější.
2. Připojte napájecí kabel: Connect the 12V DC power cable to the designated two-pin connector on the back of the ampfiltrační modul.
3. Připojení audio kabelu: Connect the audio cable to the three-pin connector on the back of the ampfiltrační modul.
4. Zajistit Ampživější: Vložte amplifier module into the wall opening and secure it using the provided screws.
5. Připevněte čelní panel: Place the decorative faceplate over the installed ampzáchranář a zajistěte ho.

2. Instalace reproduktoru

The ceiling speakers are designed for flush mounting. Ensure you have appropriate ceiling space and wiring access.

1. Výřez Marka: Use the provided cutout template to mark the desired location for each speaker in the ceiling.
2. Řezný otvor: Carefully cut the circular opening in the ceiling according to the marked template. The cutout diameter is approximately 8.07 inches (20.5 cm).
3. Odstraňte mřížku: Gently remove the magnetic grille from the front of each speaker.
4. Připojte kabely reproduktorů: Connect the speaker wires to the spring-loaded terminals on the back of each speaker. Ensure correct polarity: red wire to positive (+) terminal, black wire to negative (-) terminal.
5. Vložit reproduktor: Insert the speaker into the ceiling opening. The mounting clamps will automatically engage.
6. Utáhněte Clamps: Use a screwdriver to tighten the screws on the front baffle of the speaker. This will rotate the mounting clamps and secure the speaker firmly in place.
7. Replace Grille: Reattach the magnetic grille to the speaker.

3. Schéma zapojení

Connect the speaker wires from the ceiling speakers to the amplifier terminals. Ensure correct polarity for both speakers (red to +, black to -).

4. Připojení napájení

Connect the AC adapter to a standard 120V power outlet and then plug the DC end into the amplifier's power input. The power LED on the amprozsvítí se kontrolka záchvatu.

Návod k obsluze

Learn how to use your Herdio ceiling speaker system.

1. Zapnutí/vypnutí a ovládání hlasitosti

Turn the knob on the amplifier clockwise to power on the unit and increase the volume. Turn it counter-clockwise to decrease volume and power off. You will hear an audible drop sound when powering on.

2. Párování Bluetooth

After powering on, the blue Bluetooth indicator light will flash, indicating it is in pairing mode. On your smart device (phone, tablet, etc.), search for available Bluetooth devices and select 'Herdio'. Once connected, the blue light will remain solid.

3. Výběr vstupu

Use the input selection switch on the amplifier to choose between Bluetooth (BT), Auxiliary (AUX), or Microphone (MIC) input modes.

4. USB Functionality

The USB port functions as a flash memory reader for media playback and also provides a charging port for your devices (5V/1A).

5. Vstup pro mikrofon

Connect a microphone to the 1/4-inch MIC IN jack for paging or voice applications.

Údržba

To ensure the longevity and optimal performance of your Herdio ceiling speakers and ampzáchranáře, dodržujte tyto pokyny pro údržbu:

• Čištění: K čištění používejte měkký, suchý hadřík amplifier faceplate and speaker grilles. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
• Odstranění prachu: Periodically use a soft brush or a low-power vacuum with a brush attachment to gently remove dust from the speaker grilles.
• Podmínky prostředí: Ensure the speakers and amplifier are installed in environments free from excessive moisture, extreme temperatures, and direct sunlight. The product is not waterproof.
• Kontrola elektroinstalace: Pravidelně kontrolujte všechna kabelová připojení, abyste se ujistili, že jsou bezpečná a bez koroze nebo poškození.

Odstraňování problémů

If you encounter issues with your Herdio ceiling speaker system, refer to the following common problems and solutions:

• Bez napájení:
  • Ensure the AC adapter is securely plugged into a working power outlet and the amplifier's DC input.
  • Check if the power knob on the amplifier is turned clockwise to the 'ON' position.
  • Ověřte funkčnost elektrické zásuvky zapojením jiného zařízení.
• Z reproduktorů není slyšet žádný zvuk:
  • Confirm that the speaker wires are correctly connected to both the speakers and the amplifier, observing proper polarity (+ to +, - to -).
  • Ensure the volume knob on the ampliifier je zapnutý.
  • Check the input selection switch on the amplifier to ensure the correct source (BT, AUX, MIC) is selected.
  • If using Bluetooth, ensure your device is paired and playing audio.
  • If using AUX or MIC, ensure the external device is connected and functioning correctly.
• Problémy s připojením Bluetooth:
  • Zajistěte amplifier is in Bluetooth pairing mode (blue light flashing).
  • Make sure your Bluetooth device is within the 30+ feet wireless range.
  • Forget the 'Herdio' device from your smart device's Bluetooth settings and attempt to re-pair.
  • Restartujte oba amplifier a vaše zařízení Bluetooth.
• Zkreslený zvuk:
  • Snižte hlasitost na obou amplifier a vaše zařízení, které je zdrojem zvuku.
  • Zkontrolujte připojení reproduktorových vodičů, zda nejsou uvolněné nebo zkratované.
  • Ensure the audio source is not overdriven or producing distorted signals.

Specifikace

Informace o záruce

The Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Amplifier je dodáván s a Omezená záruka. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included in your package or contact Herdio customer support directly.

Podpora

For further assistance, technical support, or inquiries regarding your Herdio product, please visit the official Herdio website or contact their customer service department. Contact information can typically be found on the product packaging or on the Herdio webmísto.