CHACON EcoWatt 550 Schuko Power Consumption Meter User Manual

1. Úvod

The CHACON EcoWatt 550 Schuko power consumption meter is designed to help you monitor and manage your energy usage. This device provides real-time data on power (watts), consumption (kWh), voltage (volty), proud (amperes), and cost, allowing for informed decisions to optimize energy consumption and save money. It features a dual-rate function for precise cost tracking and supports a maximum power of 3500 W.

Obrázek 1: Přední strana view of the CHACON EcoWatt 550 Schuko Power Consumption Meter.

2. Bezpečnostní informace

• Read all instructions thoroughly before using the device.
• Nepokoušejte se zařízení rozebírat ani upravovat. Mohlo by dojít ke zrušení záruky a k ohrožení bezpečnosti.
• Keep the meter out of reach of children and pets.
• Do not expose the device to moisture, water, or extreme temperatures. Use only in dry indoor environments.
• Ensure the meter is properly plugged into a grounded electrical outlet.
• Do not exceed the maximum load capacity of 3500 W. Overloading can cause damage to the device or electrical hazards.
• If the device appears damaged or malfunctions, discontinue use immediately and contact customer support.

3. Nastavení

1. Vybalení měřicího přístroje: Carefully remove the EcoWatt 550 meter from its packaging.
2. Zapojte do zásuvky ve zdi: Insert the EcoWatt 550 meter into a standard Schuko 16 A wall socket.
3. Připojit spotřebič: Plug the appliance you wish to monitor into the socket located on the front of the EcoWatt 550 meter.
4. Počáteční zobrazení: The LCD display will illuminate, showing current readings. The integrated rechargeable battery (3.6 V NI-MH) ensures that your settings are retained even during power outages.

Image 2: Close-up of the CHACON EcoWatt 550 display and control buttons (UP, SET, FUNC).

4. Návod k obsluze

The EcoWatt 550 features an LCD screen and three control buttons: UP, SOUBORa ZAMĚSTNANEC. These buttons allow you to navigate through display modes and configure settings.

• Tlačítko FUNC: Press this button repeatedly to cycle through different display modes. The available modes include:
  • Aktuální výkon (W)
  • Total Consumption (kWh)
  • svtage (V)
  • proud (A)
  • Cost (displays total cost based on set rates)
• Tlačítko SET: Used to enter and confirm settings. Press and hold to activate configuration mode for parameters like time and cost rates.
• Tlačítko NAHORU: Used to adjust values when in a setting mode or to navigate through options.

Setting Cost Rates

To accurately track energy costs, you need to set your electricity tariff rates:

1. Stiskněte a podržte SOUBOR button for approximately 3 seconds until the cost setting mode is activated (e.g., a tariff value starts blinking).
2. Použijte UP button to increase or decrease the blinking value to match your electricity tariff (e.g., cost per kWh for Tariff 1).
3. Stiskněte tlačítko SOUBOR button to confirm the value and move to the next setting (e.g., Tariff 2 if your electricity plan has dual rates).
4. Repeat the process for all necessary cost parameters.
5. Once all rates are set, press the SOUBOR znovu stiskněte tlačítko pro ukončení režimu nastavení a uložení změn.

5. Údržba

• Čištění: To clean the device, ensure it is unplugged from the wall socket. Use a dry, soft cloth to wipe the exterior. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the plastic casing nebo vnitřních součástí.
• Skladování: Pokud se měřič delší dobu nepoužívá, skladujte jej na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
• Interní baterie: The integrated rechargeable battery is designed for long-term use. No user maintenance is required for the battery. If the display does not light up after being plugged in for several hours, the battery may need professional inspection.
• Žádné díly opravitelné uživatelem: The EcoWatt 550 contains no user-serviceable parts. Any attempt to open or repair the device will void the warranty and could pose a safety risk.

6. Řešení problémů

• Žádný displej / Měřič se nezapíná:
  • Ensure the meter is securely plugged into a live wall socket.
  • Test the wall socket with another appliance to confirm it is functioning correctly.
  • The internal battery might be fully discharged. Leave the unit plugged into a live socket for a few hours to allow the battery to recharge.
  • Pokud problém přetrvává, kontaktujte zákaznickou podporu.
• Nesprávné čtení:
  • Verify that the appliance plugged into the meter is functioning correctly and drawing power.
  • If cost display is incorrect, re-check and accurately set your electricity tariff rates as described in the Operating Instructions.
  • Try resetting the device by unplugging it from the wall socket for a few minutes, then plugging it back in.
• Tlačítka nereagují:
  • Ensure the device is not in a locked mode (though this model typically does not have a lock function).
  • Unplug the device and plug it back in to perform a soft reset.
  • If buttons remain unresponsive, contact customer support.

7. Specifikace

8. Záruka a podpora

For technical assistance, warranty claims, or any questions regarding your CHACON EcoWatt 550 power consumption meter, please refer to the official CHACON webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi pro účely záruky.

You can visit the CHACON brand store for more information: CHACON Brand Store