Emerio WK-122730

Emerio WK-122730 Glass Kettle with Temperature Selection - Instruction Manual

Model: WK-122730

Zavedení

Thank you for choosing the Emerio WK-122730 Glass Kettle. This appliance is designed for efficient water heating and tea preparation, offering precise temperature control and a convenient integrated tea infuser. Please read this manual carefully before first use to ensure safe and optimal operation.

Emerio WK-122730 Glass Kettle with Tea Infuser

Image: The Emerio WK-122730 glass kettle with its integrated tea infuser, filled with tea, on a wooden surface.

Bezpečnostní pokyny

Při používání elektrických spotřebičů vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění osob.

  • Neponořujte konvici, základnu, kabel ani zástrčku do vody ani jiných tekutin.
  • Zajistěte zvtagNapětí uvedené na spotřebiči odpovídá napětí vaší místní elektrické sítě.tage před připojením.
  • Udržujte spotřebič mimo dosah dětí.
  • Nepoužívejte konvici, pokud je poškozený kabel nebo zástrčka, nebo pokud spotřebič nefunguje správně nebo byl jakkoli poškozen.
  • Place the kettle on a stable, flat, heat-resistant surface, away from hot surfaces or open flames.
  • Do not fill above the maximum level indicator to prevent boiling water from overflowing.
  • Před použitím vždy bezpečně zavřete víko.
  • Pokud konvici nepoužíváte a před čištěním, odpojte ji ze zásuvky.
  • The kettle is equipped with an automatic shut-off and boil-dry protection for safety.

Nastavení a první použití

  1. Rozbalení: Opatrně vyjměte konvici a veškeré příslušenství z obalu. Obal uschovejte pro budoucí skladování nebo likvidaci.
  2. Počáteční čištění: Před prvním použitím naplňte konvici čistou vodou po maximální úroveň. Přiveďte vodu k varu a poté ji vylijte. Tento postup opakujte 2–3krát, abyste odstranili případné zbytky z výroby.
  3. Umístění: Umístěte napájecí základnu na suchý, rovný a stabilní povrch. Ujistěte se, že napájecí kabel nevisí a není v kontaktu s horkými povrchy.
  4. Připojení napájení: Zapojte napájecí kabel do uzemněné elektrické zásuvky.
Emerio WK-122730 Glass Kettle on 360-degree rotating base

Image: The Emerio WK-122730 glass kettle resting on its 360-degree rotating power base, illustrating ease of placement.

Návod k obsluze

Plnění konvice

  1. Vyjměte konvici z její napájecí základny.
  2. Open the lid and fill the kettle with the desired amount of fresh, cold water. Do not fill below the minimum (0.5L) or above the maximum (1.7L) mark.
  3. Pevně ​​zavřete víko.

Používání nálevníku čaje

The kettle features a removable stainless steel tea infuser for brewing loose leaf tea directly.

  1. After filling with water, open the infuser basket and add your desired amount of loose leaf tea.
  2. Close the infuser basket and place it securely into the kettle.
  3. Proceed with temperature selection and heating.
  4. Once brewing is complete, carefully remove the infuser using its handle to prevent over-steeping.
Woman placing tea infuser into Emerio WK-122730 Glass Kettle

Image: A person demonstrating the placement of the tea infuser into the Emerio WK-122730 glass kettle.

Temperature Selection and Heating

The kettle offers 5 preset temperature options for various beverages.

  1. Naplněnou konvici postavte na základnu.
  2. Press the temperature selection button (often marked with a thermometer icon or temperature values) repeatedly to cycle through the available temperatures: 50 °C, 70 °C, 80 °C, 90 °C, 100 °C. The selected temperature will be indicated by an illuminated LED.
  3. Press the power button (often marked with an 'On/Off' symbol) to start the heating process.
  4. The LED lighting inside the kettle will change color according to the water temperature, providing a visual indication of the heating progress.
  5. Jakmile je dosaženo zvolené teploty, konvice se automaticky vypne.
Emerio WK-122730 Glass Kettle control panel with temperature settings

Image: A close-up of the control panel on the Emerio WK-122730 kettle, showing temperature selection buttons and power button.

Emerio WK-122730 Glass Kettle with color-changing LED lights at different temperatures

Obrázek: Vícenásobný views of the Emerio WK-122730 glass kettle, illustrating the color-changing LED illumination for 50°C, 70°C, 80°C, 90°C, and 100°C.

Funkce Keep Warm

The kettle includes a keep-warm function. After reaching the selected temperature, the kettle can maintain this temperature for a certain period. Refer to the specific product documentation for the exact duration of the keep-warm function.

Údržba a čištění

Pravidelné čištění a údržba prodlouží životnost vaší konvice.

  1. Před čištěním: Před čištěním vždy odpojte konvici od elektrické zásuvky a nechte ji zcela vychladnout.
  2. Čištění exteriéru: Otřete vnější povrch konvice a základnu měkkým hadříkem.amp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo agresivní chemikálie.
  3. Čištění interiéru: For general cleaning, rinse the interior with clean water.
  4. Čištění nálevníku čaje: Remove the tea infuser and rinse it under running water. Use a small brush if necessary to remove tea leaves. It is dishwasher safe.
  5. Odvápnění: Postupem času se uvnitř konvice mohou hromadit minerální usazeniny (vápenný kámen), zejména v oblastech s tvrdou vodou.
    • Naplňte konvici směsí vody a bílého octa (poměr 1:1) nebo komerčním odvápňovacím roztokem.
    • Směs přiveďte k varu a nechte ji odstát alespoň 30 minut, v případě silného usazení vodního kamene i déle.
    • Discard the mixture and rinse the kettle thoroughly several times with fresh water to remove any residue and odor.
  6. Skladování: When not in use, store the kettle in a dry place, away from direct sunlight and moisture.

Odstraňování problémů

ProblémMožná příčinaŘešení
Konvice se nezahřívá.No power supply; Kettle not properly placed on base; Boil-dry protection activated.Check power outlet and plug; Ensure kettle is correctly seated on the base; Allow kettle to cool down, then refill with water.
Voda má neobvyklou chuť.New appliance odor; Limescale buildup.Perform initial cleaning steps (boil and discard water several times); Descale the kettle.
Kettle switches off before boiling/reaching selected temperature.Limescale buildup; Faulty sensor.Descale the kettle thoroughly; If problem persists, contact customer support.
LED světla nefungují.Elektrická porucha.Ensure kettle is powered on; If problem persists, contact customer support.

Specifikace produktu

  • Číslo modelu: WK-122730
  • Kapacita: 1.7 litru
  • Moc: 2200 wattů
  • svtage: 220 voltů
  • Materiál: Borosilicate Glass, Stainless Steel, Plastic
  • Barva: Stříbro
  • Speciální vlastnosti: BPA-free, Temperature Selection (50|70|80|90|100°C), Color-changing LED Interior Lighting, Keep Warm Function, Automatic Shut-off, Overheat Protection, Removable Stainless Steel Tea Infuser.
  • Hmotnost položky: 1.42 kg
  • Země původu: Čína
Emerio WK-122730 Glass Kettle with dimensions

Image: The Emerio WK-122730 glass kettle displaying its approximate height (27 cm) and base width (21.80 cm).

Logo bez BPA

Image: A circular green logo indicating the product is BPA-free.

Informace o záruce

This product comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions. Spare parts availability is typically 1 year from the date of purchase. Keep your proof of purchase for any warranty claims.

Zákaznická podpora

If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact the retailer or the manufacturer's customer service department. Contact details can usually be found on the product packaging or the manufacturer's official webmísto.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.