1. Úvod
This manual provides essential information for the proper installation, operation, and maintenance of your BROSE Display Unit Remote, model BRO-E41227-101. Please read this manual thoroughly before using the device to ensure safe and efficient operation. Keep this manual for future reference.
2. Bezpečnostní informace
- Always ensure the device is securely mounted before operation.
- Nevystavujte zařízení extrémním teplotám, delšímu přímému slunečnímu záření ani nadměrné vlhkosti.
- Avoid disassembling the unit. Repairs should only be performed by qualified personnel.
- Use only the specified battery type (12V) and ensure correct polarity during installation.
- Uchovávejte mimo dosah dětí.
3. Obsah balení
Ověřte, zda jsou v balení přítomny všechny položky:
- BROSE Display Unit Remote (Model: BRO-E41227-101)
- Montážní hardware (pokud je k dispozici)
- Uživatelská příručka
Poznámka: Baterie nejsou součástí balení a je nutné je zakoupit samostatně.
4. Nastavení
4.1 Instalace baterie
- Locate the battery compartment on the rear or side of the display unit.
- Otevřete kryt bateriového prostoru.
- Insert one 12V battery, ensuring the correct positive (+) and negative (-) polarity as indicated inside the compartment.
- Bezpečně zavřete kryt bateriového prostoru.
4.2 Montáž zobrazovací jednotky
The BROSE Display Unit Remote is designed for easy integration. Follow these general steps for mounting:
- Choose a suitable location for mounting, typically on handlebars or a control panel, ensuring clear visibility and easy access.
- Use the provided mounting hardware to secure the unit. Do not overtighten screws.
- Ensure all cables (if applicable) are routed safely and do not interfere with moving parts.
Image 1: BROSE Display Unit Remote e41227. This image shows the compact design of the display unit, typically used for controlling e-bike functions or similar applications.
5. Návod k obsluze
5.1 Zapnutí/vypnutí
- To power on: Press and hold the power button (usually marked with a ⑁ symbol) for approximately 3 seconds. The display will illuminate.
- To power off: Press and hold the power button again for approximately 3 seconds until the display turns off.
5.2 Funkce displeje
The display unit typically shows various information depending on its connection and mode. Common indicators include:
- Indikátor stavu baterie
- Current speed/mode
- Assistance level (if connected to an e-bike system)
- Trip distance/total distance
5.3 Výběr režimu
Use the designated mode buttons (often marked with '+' and '-' or arrows) to cycle through different display modes or adjust settings. Refer to the specific system it is connected to for detailed mode functionalities.
6. Údržba
- Čištění: Použijte měkký, damp cloth to clean the display unit. Do not use abrasive cleaners or solvents.
- Výměna baterie: Replace the 12V battery when the low battery indicator appears on the display. Ensure proper disposal of old batteries according to local regulations.
- Skladování: If storing the device for an extended period, remove the battery to prevent leakage. Store in a cool, dry place.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Displej se nezapne. | Vybitá nebo nesprávně nainstalovaná baterie. | Zkontrolujte polaritu baterie nebo ji vyměňte za novou 12V baterii. |
| Display shows incorrect information. | Loose connection or system error. | Ensure all connections are secure. Power cycle the device. If problem persists, consult the manual of the connected system. |
| Tlačítka nereagují. | Softwarová závada nebo fyzické poškození. | Remove and reinsert the battery. If still unresponsive, contact support. |
8. Specifikace
- Model: BRO-E41227-101
- Značka: BROSE
- Zdroj napájení: 1 x 12V baterie (není součástí balení)
- Přibližné rozměry (balení): 1 x 1 x 1 cm
- Approximate Weight (Package): 1 gramů
- Hlavní materiál: Not specified (typically durable plastic)
9. Záruka a podpora
BROSE products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your purchase or visit the official BROSE website. Please have your model number (BRO-E41227-101) and proof of purchase ready when contacting support.