BONTEC Mobile Standing Desk Instruction Manual

Zavedení

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your BONTEC Mobile Standing Desk. Designed for versatility and ergonomic comfort, this desk allows seamless transition between sitting and standing positions, promoting a healthier workstyle. Its mobile design makes it suitable for various environments, including offices, homes, and educational or medical settings.

Důležité bezpečnostní informace

Před montáží a použitím si prosím přečtěte a pochopte všechna bezpečnostní varování a pokyny. Nedodržení těchto pokynů může vést ke zranění nebo poškození výrobku.

• Hmotnostní limity: Nepřekračujte maximální nosnost 33 lb (15 kg) for the desktop and 11 lb (5 kg) for the keyboard tray. Overloading can cause instability and damage.
• Shromáždění: Ensure all components are securely fastened according to the assembly instructions. Do not use the desk if any parts are missing or damaged.
• Stabilita: The "H"-shaped frame base provides stability. Always ensure the desk is on a flat, stable surface. Lock the casters when the desk is in a stationary position to prevent accidental movement.
• Hnutí: When moving the desk, ensure all items are removed from the desktop and keyboard tray to prevent them from falling. Unlock the casters before moving.
• Děti a domácí mazlíčci: Keep children and pets away from the desk during assembly and operation. Moving parts can pose a pinch hazard.
• Pneumatic Spring: The height adjustment mechanism uses a pneumatic spring. Do not attempt to disassemble or tamper with the spring mechanism.

Seznam dílů

Před zahájením montáže zkontrolujte, zda jsou všechny díly přítomny a nepoškozené. Identifikaci naleznete na níže uvedeném obrázku.

Figure 1: Fully assembled BONTEC Mobile Standing Desk.

Figure 2: Product dimensions including desktop, keyboard tray, and height range.

Mezi typické komponenty patří:

• Povrch stolního počítače
• Přihrádka na klávesnici
• Main Support Column (with pneumatic spring)
• "H"-shaped Base
• Zamykací kolečka (x4)
• Háček na pytel
• Montážní materiál (šrouby, klíč atd.)

Nastavení a montáž

All necessary tools for assembly are included. It is recommended to assemble the desk on a soft, clean surface to prevent scratches.

1. Rozbalte komponenty: Opatrně vyjměte všechny díly z obalu a rozložte je. Zkontrolujte seznam dílů, zda je vše přítomno.
2. Připevnění koleček k základně: Securely screw the four locking casters into the designated holes on the "H"-shaped base. Ensure they are tightened to prevent wobbling.
3. Assemble Main Column to Base: Attach the main support column to the "H"-shaped base using the provided screws and tools. Ensure the connection is firm and stable.
4. Install Keyboard Tray Supports: Fasten the keyboard tray supports to the main column or desktop assembly as indicated in the diagrams.
5. Připojení přihrádky na klávesnici: Slide or attach the keyboard tray onto its supports. Ensure it can retract and extend smoothly.
6. Připojit plochu: Secure the desktop surface to the top of the main support column. Pay attention to the orientation for the integrated slot and keyboard tray alignment.
7. Attach Bag Hook: Install the bag hook on the side of the main column as desired.
8. Závěrečná kontrola: Once assembled, gently shake the desk to ensure all connections are secure and there is no excessive wobble.

Figure 3: Close-up of special features including the convenient slot, bag hook, "H"-shaped frame base, and mute wheels.

Návod k obsluze

Nastavení výšky

The desk features a pneumatic spring for smooth and effortless height adjustment, allowing you to switch between sitting and standing positions.

• To Adjust Upwards: Press the lever located under the desktop with your hand. The pneumatic spring will provide an upward force. Release the lever at your desired height.
• To Adjust Downwards: Press the lever with your hand and simultaneously apply downward pressure on the desktop. Release the lever at your desired height.

Figure 4: Illustration of the energy-saving gas spring mechanism for height adjustment, showing the lever and internal components.

Figure 5: Demonstrates the minimum (28.3 inches) and maximum (44 inches) height settings for sitting and standing use.

Using the Keyboard Tray

The keyboard tray is retractable, providing flexibility for your workspace setup.

• Pro prodloužení: Gently pull the keyboard tray outwards until it reaches its full extension.
• Chcete-li stáhnout: Push the keyboard tray inwards until it is fully tucked under the desktop.

Obrázek 6: Shora dolů view showing the generous desktop storage, including the integrated slot for tablets or phones, and the keyboard tray.

Mobilita a aretační kolečka

The four rolling casters allow for easy movement of the desk. Each caster is equipped with a locking mechanism.

• Přesunout: Ensure all casters are unlocked. Gently push the desk to your desired location.
• Zabezpečení: Once the desk is in position, press down on the locking lever on each caster to prevent movement.

Údržba a péče

Proper care will ensure the longevity of your BONTEC Mobile Standing Desk.

• Čištění: The MDF desktop is waterproof and scratch-resistant. Wipe surfaces with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani agresivní chemikálie.
• Železářské zboží: Pravidelně kontrolujte všechny šrouby a upevňovací prvky, zda jsou pevně utažené. V případě potřeby je dotáhněte.
• Kolečka: Pro zajištění hladkého otáčení udržujte kolečka bez prachu a nečistot.
• Pneumatic Spring: No special maintenance is required for the pneumatic spring. Do not lubricate or attempt to open the mechanism.

Odstraňování problémů

Pokud narazíte na jakékoli problémy se stolem, podívejte se na následující běžné problémy a jejich řešení:

Pokud problém přetrvává, kontaktujte prosím zákaznickou podporu.

Specifikace produktu

Informace o záruce

BONTEC products are manufactured to high-quality standards. For specific warranty details and terms, please refer to the warranty card included with your product or visit the official BONTEC webmísto. Uschovejte si doklad o koupi pro případ záručních reklamací.

Zákaznická podpora

If you have any questions, require assistance with assembly, or need to report a damaged part, please contact BONTEC customer support. Contact information can typically be found on the product packaging or the official BONTEC webmísto.

Pro více informací navštivte Obchod BONTEC na Amazonu.