COMICA VDLIVE10 2.4G Dual Wireless Lavalier Microphone System Instruction Manual

1. Úvod

The COMICA VDLIVE10 is a versatile 2.4G dual wireless lavalier microphone system designed for high-quality audio recording across various devices. This system offers dual-channel recording, flexible output modes, and a portable charging case, making it suitable for vlogging, live streaming, interviews, and online meetings. This manual provides detailed instructions for setting up, operating, and maintaining your VDLIVE10 microphone system.

2. Co je v krabici

Your COMICA VDLIVE10 package includes the following components:

• VDLIVE10 Charging Case
• 2 x VDLIVE10 Transmitters (TX)
• 1 x VDLIVE10 Receiver (USB.RX)
• 2 x Fur Wind Muffs
• 1 x 3.5mm TRRS-TRRS Audio Cable
• 1 x nabíjecí kabel USB-C na USB-A
• 1 x adaptér USB-C na USB-A
• 1 x adaptér pro studené patice
• 1 x přenosné pouzdro
• Uživatelská příručka

Image: All components of the COMICA VDLIVE10 system, including transmitters, receiver, charging case, cables, and accessories.

3. Vlastnosti produktu

• Dual-channel Wireless Microphone: The VDLIVE10 supports dual-channel recording with mono/stereo switch, volume adjustment, and mute functions. It offers internal and external microphone input modes for flexible use in various recording scenarios.
• Široká kompatibilita: Equipped with USB-C and 3.5mm TRRS-TRRS adapters, the receiver can connect to DSLR cameras, smartphones (USB-C), iPads, and laptops.
• Long Stand-by Time: The charging case fully charges in 4 hours and can recharge two transmitters and one receiver three times. The IPS display shows battery status, output mode, and audio dynamics.
• Two-Way Monitoring and Interaction: A 3.5mm headphone monitor hole allows real-time audio monitoring during recording. Remote monitoring on the transmitter is also possible for live streaming, online meetings, and teaching.
• Nízká latence: With latency less than 20ms and intelligent noise reduction, the system ensures smooth and stable recording sound.

Image: The COMICA VDLIVE10 receiver attached to a smartphone gimbal, highlighting its IPS screen, mono/stereo output, and low latency feature.

Image: The COMICA VDLIVE10 receiver detailing its USB-C plug, 3.5mm audio output port, and various compatible devices including smartphones, cameras, and laptops.

4. Nastavení

4.1 Počáteční nabíjení

Before first use, ensure all components are fully charged. Place the transmitters and receiver into the charging case. Connect the USB-C to USB-A charging cable to the case and a power source. The charging status indicators will illuminate.

Image: The COMICA VDLIVE10 multi-function charging case with transmitters and receiver inserted, displaying battery levels and charging status.

4.2 Connecting the Receiver to Your Device

The VDLIVE10 receiver offers multiple connection options:

• USB-C Devices (Smartphones, iPads, Laptops): Directly plug the USB-C connector of the receiver into your device's USB-C port.
• Cameras (DSLR/Mirrorless): Attach the cold shoe adapter to your camera's hot shoe. Insert the receiver into the cold shoe adapter. Connect the 3.5mm TRRS-TRRS audio cable from the receiver's 3.5mm output port to your camera's microphone input.
• USB-A Devices (Laptops/PCs): Use the provided USB-C to USB-A adapter to connect the receiver to a standard USB-A port.

4.3 Párování vysílačů a přijímačů

Vysílače a přijímač jsou předpárovány z výroby. Pokud je nutné párování provést znovu:

1. Ensure the transmitters and receiver are powered on.
2. Long press the pairing button on the charging case (if applicable) or follow the specific pairing instructions in the quick start guide for individual units.
3. The devices will automatically connect. The IPS screen on the receiver will show connection status.

Image: The COMICA VDLIVE10 multi-function charging case, highlighting the pairing button and power indicator lights.

5. Návod k obsluze

5.1 Zapnutí/vypnutí

Slide the power switch on each transmitter and the receiver to the 'ON' position to power them on. Slide to 'OFF' to power off.

5.2 Přepínač mono/stereo

On the receiver, press the M/S button to toggle between Mono and Stereo output modes. In Stereo mode, audio from each transmitter is recorded on separate channels.

5.3 Volume Adjustment and Mute

Each transmitter has a 'VOL/MUTE' button. Short press to adjust the volume level. Long press to mute/unmute the microphone. The mute status will be displayed on the receiver's IPS screen.

5.4 Two-Way Monitoring (Simplex/Duplex Modes)

The transmitters feature an S/D switch for Simplex and Duplex transmission modes:

• Simplex Mode (S): Unidirectional audio transmission (TX to RX). Use for standard recording where only the speaker's audio is needed.
• Duplex Mode (D): Two-way audio transmission (TX to RX, and RX to TX). This allows remote monitoring on the transmitter. Plug headphones into the 3.5mm port on the transmitter to monitor audio from the connected device or platform.

Image: A diagram illustrating the Simplex and Duplex transmission modes of the COMICA VDLIVE10, showing the S/D switch and monitoring port for two-way audio interaction.

5.5 IPS Screen Display

The receiver's IPS screen provides real-time information:

• USB digital output mode / 3.5mm analog output mode
• Napájení přijímače
• Transmitter signal strength
• Transmitter volume
• Group A/B paired/unpaired status
• Výkon vysílače
• Transmitter audio dynamic bar

Image: Detailed instructions for understanding the information displayed on the COMICA VDLIVE10 receiver's IPS screen, including connection status, volume levels, and battery indicators.

6. Nabíjení a výdrž baterie

The VDLIVE10 system is designed for extended use with its integrated charging solution.

• Plné nabití nabíjecího pouzdra trvá přibližně 4 hodiny.
• Once fully charged, the case can recharge the two transmitters and one receiver up to 3 times.
• Each transmitter and the receiver provide up to 12 hours of operation on a single full charge.

Image: The COMICA VDLIVE10 charging case highlighting its 1000mAh battery capacity and 12 hours of operation, with charging status indicators for TX and RX units.

7. Kompatibilita

The COMICA VDLIVE10 is compatible with a wide range of devices:

• chytré telefony: USB-C enabled Android phones. (Note: For iOS devices, select the VDLIVE10 MI version or purchase an adapter cable.)
• Tablety: USB-C enabled iPads and other tablets.
• Notebooky/počítače: Devices with USB-C or USB-A ports (using the provided adapter).
• Kamery: DSLR and mirrorless cameras with a 3.5mm microphone input.

Image: The COMICA VDLIVE10 demonstrating its USB digital output mode for smartphones, tablet PCs, and laptops, and 3.5mm analog output mode for cameras, camcorders, and GoPros.

8. Specifikace

9. Řešení problémů

• Žádný audio výstup: Ensure the receiver is correctly connected to your device and the volume levels on both the transmitters and receiver are adjusted. Check that microphones are not muted.
• Špatná kvalita zvuku/šum: Ensure transmitters and receiver are fully charged. Avoid blocking the antenna position during use. If using external microphones, ensure they are properly connected.
• Problémy s připojením: Ensure all devices are powered on. Try re-pairing the transmitters and receiver. Move closer to the receiver to check for range limitations.
• Zařízení nebylo rozpoznáno: For USB connections, ensure your device's operating system recognizes the VDLIVE10 as an audio input/output device. Restart your device if necessary.

10. Záruka a podpora

COMICA products typically come with a standard manufacturer's warranty. For specific warranty details, product support, or technical assistance, please refer to the warranty card included in your package or visit the official COMICA webmísto. Uschovejte si doklad o koupi pro případ záručních reklamací.

11. Oficiální produktová videa